• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.106-111
• /
• 2001

This study reports the grinding characteristics of quartz. Grinding experiments were performed at various grinding conditions including wheel mesh, table speed and depth of cut. The grinding forces and specific grinding energies were measured. Surface roughness was also measured with tracer and the ground surfaces were observed with SEM. A new parameter SDR(Surface roughness Direction Ratio) is proposed to characterize the grinding mechanisms of quartz. A set of experiments was performed to verify the effectiveness of the suggested parameter. The experimental results indicate that the ductile mode is the dominant material removal mode at the grinding conditions which show the higher value of SDR whereas the material is removed by brittle fracture in a lower value of SDR value increases with wheel mesh size.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.489-493
• /
• 2000

Turbine blade has trouble of cracking at root region. Fracture surface of blade root is surveyed by SEM and AFM to clear relation between fracture mechanical parameter and surface parameter (striation width and surface roughness). Service stress is predicted by maximum height roughness $R_{max}$, on fractured surface and stress analysis on turbine blade. It is to thought that turbine blade is fractured by abnormal condition such as incorrect fittings between pin and pin hole but isn't fractured by normal service conditions such as steam pressure, centrifugal force and torsional force.

• 한국표면공학회지
• /
• 제22권1호
• /
• pp.17-25
• /
• 1989

The structural Charactesties and adhesion of chemically vapor deposited TiN film on stain less steels have been investated as functions of deposition temperature, surface roughness of sub state, and types of substrates. The grain zine and the lattice parameter of TiN film decreased with decreasing roughness of substates. The(200) preferred orientation was developed dominatly and the lattlice parameter decreased as temperature intereased reardless of the surdless roughnessand type of the substrates used. The surface morphology of TiN film changed from bushed crystal to a plate and then to pyamidal dense crystals with an increase in the deposition temperature. The adhesion of TiN films increased with coating thinkness and decreased with surface roughness in general. The calculations using a Bejamin & Weaver's model have been compard. Maximum valuse of adhesion energy calculated using Laguier's model were W304=331Jm-2,w410=113Jm-2,andW430=107jm-2

• 한국음향학회지
• /
• 제42권6호
• /
• pp.491-499
• /
• 2023

해수면 거칠기에 의해 해수면 산란이 발생하면 통신신호의 주파수 확산과 통신채널 시변동성을 야기하여 통신성능을 악화시킨다. 수면 거칠기에 따른 통신채널의 시변동성 차이를 비교하기 위하여 한양대학교 해양음향공학연구실 수조에서 실험을 수행하였다. 수조에서 인위적인 수면 거칠기를 생성하고 대역폭에 따른 차이를 비교하기 위하여 3가지 대역폭을 갖는 통신신호를 사용하였다. 측정된 수면 거칠기는 레일리 파라미터로 변환하여 거칠기에 대한 파라미터로써 사용하였으며, 수면 경로의 시변 채널 특성은 도플러 확산과 상관시간을 이용하여 통계적 분석을 수행하였다. 수면 경로의 도플러 확산은 통신신호의 반송 주파수와 대역폭의 영향을 보정한 가중 유효 도플러 확산(Weighted Root Mean Square Doppler spread, w_fσ_ν)을 사용하였다. 수면 경로의 상관시간과 직접 경로와 수면 경로의 에너지 비율을 이용하여 전체 채널의 상관관계를 모의하고 측정된 전체 채널의 상관시간과 비교하였다. 본 연구에서는 해수면 거칠기에 따른 해수면 경로의 시변 채널특성을 이용하여 임의의 해양환경에서 효율적인 통신신호 설계를 위한 방법을 제안한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.521-522
• /
• 2007

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 춘계학술대회 논문집
• /
• pp.1-5
• /
• 1997

The plane surface rolling, one of the plastic working process, good surface condition due to increase of surface roughness and hardness. It is well known that mechanism of surface rolling depends upon rolling conditions such as rolling speed, contact pressure, step length of rolling, the shape of roller and mechanical properties of material. In this study, the optimal value of the above parameter on the surface roughness were investigated by using the rolling tool with NACHI 6000ZZ ball bearing outer races on machine structure carbon steel[SM45C]

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.862-865
• /
• 2000

The object of this paper is to evaluate the surface roughness using the experimental equation of surface roughness, which is developed in turning by an orthogonal array method. $L_9{3^4}$ orthogonal array method, one of fractional factorial design has been used to study effects of main cutting parameters such as cutting speed, feed rate and depth of cut, on the surface roughness. And the analysis of variance (ANOVA)-test has been used to check the significance of cutting parameters. Using the result of ANOVA-test, the experimental equation of surface roughness, which consists of only significant cutting parameter - feed rate, has been developed. The coefficient of determination of this equation is 0.962.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.889-893
• /
• 1997

In this study the runout of spindle is selected as a parameter through which we could measure the machinability of machine and the quality of products. We experimented the effects of runout on surface roughness in high-speed ball-end milling by cutting HP4M workpiece in various cutting condition. It was founs that sunout makes a directive effects on surface roughness and the frequensy type of runout is more or loss similar with that of surface roughness. So the predcition of surface roughness could be possible through measuring the spindle runout.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1353-1356
• /
• 2004

In recent year, OLED(organic light emitted display) is used as the next generation device of FPD. OLED have been replacing the flat panel display device such as LCD, STN-LCD and TFT because this device is more efficient, economic and simple than those FPD devices, and this need not backlight system for visualization. The performance and efficiency of OLED is related with surface defect of ITO coated glass substrate. The typical surface defect of glass substrate is nonuniformity and bad surface roughness. ITO coated glass substrate is destroied for inspection about surface roughness and non-uniformity. Generally detection of the defects in the surface for ITO coated glass substrate is dependent on operator's experience. In this research, relationship between working parameter and surface non-uniformity is studied using regression analysis.

• 한국해양학회지:바다
• /
• 제3권2호
• /
• pp.53-58
• /
• 1998

거친 바닥을 포함하고 있는 laminar 에크만층 내 흐름의 방향변화를 파악하기 위하여 바닥경계조건을 Taylor 급수로 전개하여 에크만방정식의 해를 구하였다. 이때 거친 바닥의 거칠기 정도를 나타내는 변수 h/${\delta}_E$(h, 거칠기의 rms 높이; ${\delta}_E$, 에크만층 두께)의 크기를 변화시켜 거칠기에 의한 에크만층 내 흐름의 방향변화(에크만 veering)를 구하였다. 거칠기 증가시 에크만층 내 일정 수심에서 변회각의 크기가 증가할 뿐만 아니라 이에 따른 cross-isobar 수송량은 도리어 감소함으로써, 결과적으로 내부의 지형류 속도가 감소함을 보여주고 있다. 이러한 이론적 결과를 증명하기 위해 회전반 실험을 실시하였고 관측된 결과는 이론적인 것과 잘 일치하고 있다.