• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.13-18
• /
• 2020

Iron oxide nanoparticles were microencapsulated using fibroin, a protein polymer of silk fiber, for theragnostic applications. The content of iron oxide was determined to be 4.28% by thermogravimetric analysis and 5.11% by magnetometer. A suspension of murine fibroblast 3T3 cells grown in medium supplemented with iron oxide-microcapsules turned clear in response to the magnetic force and the cells aggregated to the magnet direction. Neodymium magnets placed on the top of the culture dish, and attracted cells to the center of the culture surface. The cells collected on the culture surface aggregated to form a rough spheroid of 2 mm in a diameter after 72 h. In the outer layer of the cell aggregate, cells were relatively large and gathered together to form a dense tissue, but the central part was observed to undergo cell death due to the mass transfer restriction. In the outer layer, iron oxide-microcapsules were lined up like chains in the direction of magnetic force. Using microCT, it was demonstrated that the iron oxides inside the cell aggregate were not evenly distributed but biased to the magnetic direction.

• Journal of Ginseng Research
• /
• v.32 no.1
• /
• pp.39-47
• /
• 2008

UV irradiation causes skin-aging involving coarse wrinkles, thickening, dyspigmentation, and rough skin surface. These phenomena in complex skin tissue is controlled with receptor of cell surface growth factor and cytokine receptors. The activation of receptors induces multiple downstream signaling pathways including expression of MMPs (matrix metalloproteinases). This study was aimed to elucidate the mechanism for anti-wrinkle activity of Korean red ginseng, Torilis fructus and Corni fructus mixture (KTNG0345). In this animal study, we have investigated decreasing effects of Korean red ginseng mixture on MMP-3 synthesis through diminishing $TNF-{\alpha}$ signaling that express MMP-1, -3, and -9. c-Jun and c-fos as a component of transcription factor AP-1 (activator protein-1) were analyzed the expression level using real time PCR and western blotting. c-Jun was decreased dose dependent manner both gene and protein level where as cfos was not changed. In upstream, JNK and PAK was not changed, but p38 was decreased in down stream. MMP-3, final product in this pathway was significantly decreased in dose dependent manner. These results suggest that Korean red ginseng mixture have a anti-wrinkle activity through $TNF-{\alpha}$ mediated MMPs expression pathway.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.5
• /
• pp.595-605
• /
• 2000

Dental ceramics have good aesthetics, biocompatibility, low thermal conductivity, abrasion resistance, and color stability. However poor resistance to fracture and shrinkage during firing process have been limiting factors in their use, particularly in multiunit ceramic restorations. A new method for making all-ceramic crowns that have high strength and low processing shrinkage has been developed and is referred to as the Vita In-Ceram method. This study was performed to investigate the effect of $CeO_2$ addition in borosilicate glasses on the strength of alumina-glass composites. Porous alumina compacts were prepared by slip casting and sintered at $1,100^{\circ}C$ for 2 hours. Dense composites were made by infiltration of molten glass into partially sintered alumina at $1,140^{\circ}C$ for 4 hours. Specimens were polished sequentially from #800 to #2000 diamond disk. and the final surface finishing on the tensile side was received an additional polishing sequence through $1{\mu}m$ diamond paste. Biaxial flexure test was conducted by using ball-on-three-ball method at a crosshead speed of 0.5mm/min. To examine the microstructural aspect of crack propagation in the alumina-glass composites, Vickers-produced indentation crack was made on the tensile surface at a load of 98.0 N and dwell time of 15 sec, and the radial crack patterns were examined by an optical microscope and a scanning electron microscope. The results obtained were summarized as follows; 1. The porosity rates of partially sintered alumina decreased with the rising of firing temperature. 2. The maximum biaxial flexure strength of 423.5MPa in alumina-glass composites was obtained with an addition of 3 mol% $CeO_2$ in glass composition and strength values showed the aspect of decrease with the increase of $CeO_2$ content. 3 The biaxial flexure strength values of alumina-glass composites were decreased with rising the firing temperature. 4. Observation of the fracture surfaces of alumina-glass composites indicated that the enhancement of strength in alumina-glass composites was due to the frictional or geometrical inter-locking of rough fracture surfaces and ligamentary bridging by intact islands of materials left behind the fracture front.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.112-124
• /
• 1997

According to extensive use of composite resin which have superior esthetic property, every effort on improving bonding strength between a tooth and composite resin has been continued. Acid etching technique is a method that micro-etches the tooth surface which provides bonding with composite resin possible. Recently, there were several reports that mechanical treatment obtained from air-abrasion can provide similar bonding strength with acid etching technique. So, this experimental study was designed to compare the shear bonding strength between using air-abrasion technique and using acid etching technique. Initially, bovine teeth were divided into enamel and dentin experimental groups. Respectively each group was categorized into three subgroups. One subgroup was acid etched with 35% phosphoric acid, then bonded with composite resin. The other subgroup was air-abraded with $50{\mu}m$ $Al_2O_3$ particles sprayed with 160psi air pressure using air abrasion unit(KCP-1000, A.D.T., U.SA), and composite resin was bonded. In another subgroup, composite resin was bonded after acid etching following air-abrasion. So, enamel experimental groups were made of E1 (acid etched only), E2(air-abraded only), E3(acid etched following air-abraded), and dentin experimental groups were made of D1(acid etched only), D2(air-abraded only), D3(acid etched following air-abraded). Each subgroup had 10 specimens. Dentin bonding system(Scotchbond Multi-purpose, 3M Co., U.S.A.) and composite resin(Z-100, 3M Co., U.S.A.) were applied on treated surface using 5mm diameter gelatin capsule as manufacturer's direction. After 1200 times thermocycling between $5^{\circ}C$ and $55^{\circ}C$, shear bond strength was measured in 5mm/min crosshead speed with Instron(Instron Co., U.S.A.), and also treated enamel and dentin were observed with SEM(JEOL Co., Japan). The following results were obtained: 1. In the enamel experimental groups, acid etched following air-abraded group had highest shear bond strength, but there was no significant difference compared to acid etched group. Air-abraded only group had lowest shear bond strength, and there was significant difference compared to the rest of groups. 2. In the dentin experimental groups, acid etched following air-abraded group had highest shear bond strength, but there was no significant difference compared to acid etched group. Air-abraded only group had lowest shear bond strength, and there was significant difference compared to the rest of groups. 3. In the SEM study, air-abraded enamel and dentin had irregular and rough surfaces.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.644-651
• /
• 2009

This study was conducted to investigate the effects of steeping periods and temperatures of waxy rice on the microflora and enzyme activities of steeping water and waxy rice, as well as on the microscopic structures of waxy rice during the preparation of gangjung. When the steeping water was 15 and $35^{\circ}C$, yeast and lactic acid bacteria were the major microflora after 1 day. After 11 days, Lactobacillus spp. were the major bacteria, while Bacillus spp. were the primary microflora after 21 days. At $25^{\circ}C$ the primary species were Bacillus spp., Leuconostoc spp., and Bacillus spp. after 1, 11 and 21 days, respectively. The $\alpha$-amylase activity of steeping water increased proportionally with the increase of temperature and period, while the protease activity tended to increase for 11 days, but decreased at 21 days. The enzyme activities of the steeped waxy rice, especially the $\alpha$-amylase activity, decreased with higher steeping temperature, while the $\beta$-amylase and glucoamylase activity remained constant for up to 21 days. Observation using scanning electron microscopy indicated that intracellular cleavage of steeped waxy rice endosperm resulted in a rough surface morphology due to the exposure of polygonal starch granules. Tiny pinholes on the surface of waxy rice starch granules were also observed after steeping for 11 days.

• Nuclear Engineering and Technology
• /
• v.11 no.1
• /
• pp.47-54
• /
• 1979

A field experiment has been carried out to evaluate the residual effect of zinc fertilizers by rice plant grown under flooded conditions in the field. The results obtained are summarized as fellows ; Residual effect of zinc fertilizers on yields of rough and hulled grains showed slight increases. Effect of zinc application methods on yields of the grains were shown that zinc mixed treatment could be more effectively utilized than treatment of zinc on the soil surface. In case of levels of zinc application, 5 kg zinc per hectare represented high yields of the grains than those obtained from 10kg and 20kg zinc placement per hectare respectively. Regarding the form of zinc fertilizers, the urea-zinc complex showed less effective on yields of the grains than did the zinc sulfate. This phenomenon was consistent with the previous result. Yields of total zinc in rice plant grown on the rice straw added soils (Treatment No. 2 and 8) and the urea-zinc complex treated soil were increased markedly as compared to those data obtained from the previous year. The percentage of zinc derived from fertilizer decreased largely as compared to that of the first year crop. The yield of fertilizer zinc in rice plant decreased slightly in the most zinc treatments but in the case of treatments of zinc mixed with the straw added soil and the urea-zinc complex increased reversely as compared to the previous results. The mixed application of zinc with soil showed higher yield of fertilizer zinc than the soil surface placement. Approximately from 4.6 to 24.3 per cent of zinc taken up by rice plants were derived from the fertilizer zinc. Zinc fertilizer use efficiency ranged from 0.213 to 0.584 per cent when 5 kg zinc per hectare applied.

• Journal of the Korean Magnetics Society
• /
• v.21 no.3
• /
• pp.93-98
• /
• 2011

We successfully grew $La_{0.35}Pr_{0.35}Ca_{0.3}MnO_3$(LPCMO)/$LaAlO_3$(LAO) thin film using Laser Molecular-Beam Epitaxy and studied post-growth annealing effects ($750^{\circ}C$, 5 h) on its crystal structural and magnetic properties. Whereas the single-layered LPCMO and LPCMO/STO superlattice thin films show rough surface before and after the post-growth annealing, LPCMO/LAO superlattice shows a relatively very flat surface even after the post-growth annealing. The enhancement of ferromagnetism of LPCMO/LAO superlattice after the post-growth annealing was remarkable compared to the single-layered LPCMO thin film. The coercive and saturation magnetic field of the single-layed LPCMO thin film were decreased after the post-annealing. However, for LPCMO/LAO superlattice, a same coercive and increased saturation magnetic field were exhibited after post-growth annealing. We suggest that these peculiar observations are originate from the super-structure of LPCMO and LAO.

• Archives of Craniofacial Surgery
• /
• v.10 no.1
• /
• pp.49-54
• /
• 2009

Purpose: Inevitably, Maxillary structural defect follows maxillary cancer extirpation. Maxillary reconstruction is over every surgeon's head. Every physician tried to overcome limited donor site of craniofacial defect. We considered to suggest optimal method of inferior orbital wall defect in functional point as well as esthetic point. Methods: We performed wide excision of maxilla and vascularized partial thickness calvarial bone flap to reconstruct the defect from cancer extirpation in three cases. We select ipsilateral superficial temporal artery, vein and outer cortex of parietal bone flap as donor. And we applied bone flap as inferior orbital wall structure. The bony surface was wrapped with fascia to prevent direct contact between orbital contents and rough bony flap surface. Computed tomography image was checked during follolw up period. Results: We can observe these patients for over two years. In all three cases, We can get fair inferior orbital wall structure. Even though they got radiation therapy, there was no limitation of extraocular movements, no diplopia. no enophthalmos. Also there was minimal donor site morbidity. Conclusion: We suggest vascularized calvarial bone flap is practically excellent strategy for inferior orbital wall reconstruction.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.601-606
• /
• 2009

Amelogenesis Imperfecta (AI) is a genetic disorder which retards the development of enamel and it can be classified into three types: hypoplastic, hypomaturation, hypocalcified type. This can occur both in deciduous and permanent dentition. A 8 year 8 month old patient with a chief complaints of delayed eruption on upper anteriors, calculus deposit on lower anteriors and anterior openbite visited the clinic. Anteriors had thin layer of enamel and were very narrow. Especially lower anteriors had rough surface and were in bad shape. Teeth were very hypersensitive to thermal changes. Upper and lower first molars showed severe attrition on the occlusal surface. Radiographs also verified hypoplastic enamel in the whole dentition including the teeth in the tooth bud. The patient was diagnosed as hypoplastic AI, and is being treated at the pediathc and prosthodontic department of the Kyunghee dental university hospital. To improve the function, esthetics, hypersensitivity of the AI patients, restorations on the posteriors and the anteriors with oral hygiene instruction are necessary, Constant follow-up check is needed until full growth and after full growth, cooperative care with the other department is needed.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.12
• /
• pp.978-981
• /
• 2013

This study selected representative popular bowls used in daily life and laboratory and investigated the amount of residual surfactant resided in the bowls that were dish-washed. The bowls were washed by a scourer soaking 8 mL-detergent and then rinsed by flowing water for 7 or 15 seconds. One hundred milliliter of distilled water was placed in the washed-bowls to extract residual surfactant on the bowl surface and then analysed. All washed-bowls included residual surfactant after 7 second-rinsing. Residual surfactant concentrations in Ttukbaegi (earthen bowl), flying pan, glass bowl, and plastic bowl were 4.68, 1.22, 0.57, and 0.25 mg/L, respectively. However, the 15 second-rinsing showed that surfactant was detected only in Ttukbaegi and other bowls were clean. The results showed that surfactant would reside on the porous or rough surface of the bowl even after final rinsing. This study imply that all bowls and glasses should be throughly rinsed after detergent-washing to reduce continuos ingestion. Furthermore, residual surfactant in the glassware of laboratory may significantly affect experiment results.