• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.379-381
• /
• 2011

Direct numerical simulations (DNSs) of spatially developing turbulent boundary layers (TBLs) over two-dimensional (2-D) and rod and three-dimensional (3-D) cube rough walls were performed to investigate the effects of streamwise spacing on the properties of the TBL The 2-D and 3-D roughness were periodically arranged in the downstream direction with pitches of px/k=2, 3, 4, 6, 8 and 10 and for the cube, the spanwise spacing is fixed to pz/k=2 with staggered array, where px and pz are the streamwise and spanwise spacings of the roughness and k is the roughness height. Inspection of the Reynolds stresses showed that except for px/k=2 and 3 over the 2-D rough walls, the effects of the surface roughness extend to the outer layer over the 2-D and 3-D rough walls and the magnitude of the Reynolds shear stress in the outer layer is increased with proportion to px/k. However, such results are contrary to the trends of form drag, roughness junction and roughness length against px/k, which showed the maximum values at px/k=8 and 4 over the 2-D and 3-D rough walls respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.299-304
• /
• 2001

An approach is developed for parametric investigation of the influence of the surface roughness on thermohydrodynamic analysis with film conditions which systemically occur in journal bearings. A parametric investigation is performed for predicting the bearing behaviors such as pressure and temperature distributions in lubricating films between the stationary and moving surfaces determined by absorbed layers and interfaces on the statistical method for rough surface with Gaussian distribution. The layers expressing the effects of surface roughness are expressed as functions of the standard deviations (${\sigma}$) of each surface and surface orientation (j) to explain the flow patterns between both rough surfaces. The coupled effect of surface roughness and shear zone dependency on hydrodynamic pressure and temperature has been found by solving the present model in non-contact mode and contact mode, respectively.

• 한국음향학회지
• /
• 제28권3호
• /
• pp.174-186
• /
• 2009

경계면이 존재하는 해양에서의 수중 음파 전달 모델링 시 일반적으로 평평한 경계면을 가정하고 Rayleigh가 제안했던 반사계수를 이용해 반사파를 계산할 수 있다. 하지만 해수면이나 해저면과 같은 실제 해양의 경계면은 불규칙적인 거칠기를 가진다. 이러한 경계면에서의 반사 손실은 실험식이나 산란 이론에 기반한 간섭 반사 계수를 계산하여 구할 수 있다. 본 논문에서는 섭동 이론, Kirchhoff 근사법, 작은 가지 근사법과 같은 산란 이론을 이용하여 유체-유체 경계면에 대한 간섭 반사 계수를 각각 유도한다. 이를 이용하여 임의의 거칠기를 가지는 해수면과 해저면에 대한 각 산란 이론의 간섭 반사계수를 계산하며, 이 결과를 Rayleigh 반사 계수와 비교하여 경계면의 거칠기에 따른 반사 손실을 분석한다. 또한, 섭동 이론과 Kirchhoff 근사법의 결과를 일반적으로 적용 범위가 넓은 작은 기울기 근사법의 결과와 비교하여 각 이론의 유효범위에 대해 고찰한다.

• Tribology and Lubricants
• /
• 제29권1호
• /
• pp.27-32
• /
• 2013

This study examined the effects of surface roughness in the mixed lubrication regime of smooth and rough surfaces for roller bearings. The average flow model was adopted for interaction between the flow rheology of the lubricant and the surface roughness. The average Reynolds equation and related flow factor that describes the coupled effects of surface roughness and flow rheology, the viscosity-pressure and density-pressure equations, the elastic deformation equation, and the force balance equation were solved simultaneously. The results showed that the effects of surface roughness on the film thickness and pressure distribution should be considered, especially in elastohydrodynamic lubrication contact problems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1227-1230
• /
• 2003

A roughing process is one of the most important and indispensable shoe manufacturing processes of various types of shoes. This basic process to rough the upper of the shoe is studied to improve the productivity and to reduce the processing time. In this study, the CAM system for shoe roughing is developed. The B-spline surface generated by the developed CAM system ignores the small inclinations of the real roughing surface because the developed roughing tool has potential to rough the roughing surface of the shoe properly. The roughing tool roughs the roughing surface using its side along the generated tool paths. The generated NC codes were applied to 5-axis polishing machine for the test. Experimental results show good evaluation result. The upper of the shoe is roughed properly along the roughing path line and the roughing surface was good to cement the outsole of the shoe.

• 한국기계가공학회지
• /
• 제8권2호
• /
• pp.46-52
• /
• 2009

Drilling operation is such an important machining process, which has been wildly applied to the industry, occupied over 30% of whole industry. However, there are many aspects of drilling process should be improved, such as increases of thrust force, surface roughness, and roundness, ect. In this study, we are aiming to reduce the thrust force, surface roughness, and roundness in drilling process. For this purpose, multi facet drills (MFD) of three types that are modified from standard drill (STD) are developed. The first type is multi stair drill (MSD) with shape of stair on relief plane. The second type is rough facet drill (RFD) with shape of round on relief plane. The third type is rough flute drill (RFLD) with shape of round on flute plane. For three types of MFD, we were carried out performance evaluation from the perspective of thrust force, surface roughness and roundness of machined hole. From obtained result, we could confirmed that performance of rough flute drill (RFLD) type is most excellent.

• 대한원격탐사학회지
• /
• 제16권1호
• /
• pp.65-72
• /
• 2000

본 논문에서는 불규칙적으로 거친 유전체 표면에서의 레이더 산란계수를 FDTD 방법과 Monte Carlo 방법을 이용하여 계산하였다. 본 연구의 FDTD 방법에서는 입사파의 입사각과 편파를 바꾸어 가며 전파 산란을 계산할 수 있으며, thin wire의 RCS를 이 FDTD 방법을 이용해 계산하여 본 알고리즘을 검증하였다. 2차원적으로 거친 표면에서의 전파산란을 연구하기 위해 우선 주어진 표면 높이 분포가 Gaussian 상관함수를 갖는. 2차원적으로 거친 표면을 컴퓨터로 생성하였다. Maxwell 방정식을 차등 방정식으로 바꾼 후 계산 영역은 total field 영역과 scattered field 영역으로 나누어 FDTD를 이용해서 거친 표면 조각들에서의 산란 전계를 계산했다. 통계적으로 독립적인 50개의 표면 조각들에서 계산된 산란 전계를 이용해 레이더 후방산란계수를 구하였으며, 이 결과를 이론적 모델 중의 하나인 SPM과 비교해 보았다. FDTD 방법을 이용해 얻은 결과와 SPM을 이용해 얻은 결과가 대체적으로 잘 일치하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.53-59
• /
• 2004

Rough surfaces are taking into account to estimate the contact fatigue life. A computational methodology and the theoretical basis in this case is presented in this paper. Displacement solution technique by Cho and Love is applied to calculate the stress history beneath the surface subjected to loading. Mesoscopic multiaxial fatigue criterion is then applied to predict fatigue life. This fatigue criterion yields satisfactory results for non-proportional loading and can satisfactorily describe the physical mechanisms of crack initiation as well. As a result of analysis the relation between the life and the roughness as well as the most probable depth of the crack nucleation is discussed.

• Journal of electromagnetic engineering and science
• /
• 제18권2호
• /
• pp.136-140
• /
• 2018

We propose an improved semi-empirical scattering model for X-band radar backscattering from rough sea surfaces. This new model has a wider validity range of wind speeds than does the existing semi-empirical sea spectrum (SESS) model. First, we retrieved the small-roughness parameters from the sea surfaces, which were numerically generated using the Pierson-Moskowitz spectrum and measurement datasets for various wind speeds. Then, we computed the backscattering coefficients of the small-roughness surfaces for various wind speeds using the integral equation method model. Finally, the large-roughness characteristics were taken into account by integrating the small-roughness backscattering coefficients multiplying them with the surface slope probability density function for all possible surface slopes. The new model includes a wind speed range below 3.46 m/s, which was not covered by the existing SESS model. The accuracy of the new model was verified with two measurement datasets for various wind speeds from 0.5 m/s to 14 m/s.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.34-41
• /
• 2000

Surface roughness plays a significant role in friction, wear, and lubrication in machine components. Most engineering surfaces have the nongaussian distrubution. So, in this study, contact simulation are conducted for not only gaussian surfaces but also nongaussian surfaces. Nongaussian rough surface censidering the kurtosis is generated numerically, And the effects of kurtosis on real contact area fraction, average gap, and mean asperity contact pressure are studied. It will be shown that the real contact area fraction and the mean asperity contact pressure are sensitive to the characteristics of surface geometry according to kurtosis.