• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.89-103
• /
• 2004

Provenance discrimination of sixty four obsidian artifacts found in the Korean Peninsular has been carried out using major elements, minor elements and magnetic properties. Most of obsidians in this study were classified into the subalkaline series based on the contents of $Al_2O_3,\;CaO,\;and\;Na_2O+K_2O$ in samples. Provenance & obsidians were classified into three major groups using major elements and minor elements analyse. This result suggests that there are no correlations among the three groups whose provenances are different. Although the magnetic properties of obsidians do not yield clear groupings according to the archaeological site, the bivariate plot for the magnetic susceptibility and the saturation isothermal remanent magnetization shows a rough correlation with the results of major and minor elements analyses.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.4
• /
• pp.761-771
• /
• 1998

In this study, attempt has been made to evaluate the effect of $CO_2$ laser irradiation on enamel surface structure and the bond strength of sealant material. Conventional acid etching was used as a control technic for comparison. The results obtained from this experiment were as follows; 1. The highest mean shear bond strength value was observed in samples of Group I (acid-etching) with the statistical significance(p<.05) between all the other groups. 2. The shear bond strength in Group IV was the lowest among laser etching groups. but there were no significant difference between them(p>.05). 3. Scanning electron microscopic observation showed that the rough and irregular surface was created by $CO_2$ laser treatment with the formation of numerous pores, micro-cracks, and small bubble-like inclusion. Increasing the energy density induced localized surface melt with a thin smooth glaze-like appearance. 4. In acid-etched control specimen cohesive failure predominated, whereas adhesive failure was the main mode in laser-treated group. Based upon the above-mentioned results, it can be assumed that the $CO_2$ laser is not an adequate substitute for the acid-etch technique in enamel preconditioning. More studies are required to explore the effective condition of laser irradiation which could attain the better bond strength of restorative materials.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.35.1-35.1
• /
• 2010

The Cu(In,Ga)Se2(CIGS) thin film solar cells have been achieved until almost 20% efficiency by NREL. These solar cells include chemically deposited CdS as buffer layer between CIGS absorber layer and ZnO window layer. Although CIGS solar cells with CdS buffer layer show excellent performance, many groups made hard efforts to overcome its disadvantages in terms of high absorption of short wavelength, Cd hazardous element. Among Cd-free candidate materials, the CIGS thin film solar cells with Zn compound buffer layer seem to be promising with 15.2%(module by showa shell K.K.), 18.6%(small area by NREL). However, few groups were successful to report high-efficiency CIGS solar cells with Zn compound buffer layer, compared to be known how to fabricate these solar cells. Each group's chemical bah deposition (CBD) condition is seriously different. It may mean that it is not fully understood to grow high quality Zn compound thin film on the CIGS using CBD. In this study, we focused to clarify growth mechanism of chemically deposited Zn compound thin film on the CIGS, especially. Additionally, we tried to characterize junction properties with unfavorable issues, that is, slow growth rate, imperfect film coverage and minimize these issues. Early works reported that film deposition rate increased with reagent concentration and film covered whole rough CIGS surface. But they did not mention well how film growth of zinc compound evolves homogeneously or heterogeneously and what kinds of defects exist within film that can cause low solar performance. We observed sufficient correlation between growth quality and concentration of NH3 as complex agent. When NH3 concentration increased, thickness of zinc compound increased with dominant heterogeneous growth for high quality film. But the large amounts of NH3 in the solution made many particles of zinc hydroxide due to hydroxide ions. The zinc hydroxides bonded weakly to the CIGS surface have been removed at rinsing after CBD.

• Applied Microscopy
• /
• v.27 no.2
• /
• pp.165-175
• /
• 1997

This paper aims to prove the effects of Squalene (SQ) on the cellular toxicity of 5-FU to the mouse which pretreated with SQ and then treated with 5-FU. The results of the group A (treated with only 5-FU) are as follows. The nucleus was destroyed at 24 hours and 48 hours group, however, somewhat repaired at 72 hours group. The dilated inner cavity and the irregular lamellae of the rough surfaced endoplasmic reticulum (RER) were observed continually until 72 hours group. The inner cavity of the smooth surfaced endoplasmic reticulum (SER) were dilated in all groups. However, the destroyed and the normal membrane were observed simultaneously at 72 hours group. The inner membrane of the mitochondria were almost repaired at 96 hours group. The results of the group B (treated with 5-FU and squalene) are as follows. The nucleus was a little influenced by the toxicity of 5-FU at 24 hours and 48 hours, RER were observed to keep the typical lamella structure of cisternae from 24 to 72 hours group, but inner cavity kept on dilating. In SER, inner cavity were also observed to flatten from 24 to 72 hours group. Mitochnodria were always shown normal. All cell organelles were simillar to those of normal groups at 96 hours. Accordingly, it can be said that the treatment of 50 prevents the cytotoxicity of 5-FU on cell organelles of liver cell and that is concerned with the formation of membrane system of cell organelles.

• Animal cells and systems
• /
• v.16 no.3
• /
• pp.207-214
• /
• 2012

Burns are one of the most devastating forms of trauma and wound healing is a complex and multicellular process, which is executed and regulated by signaling networks involving numerous growth factors, cytokines, and chemokines. Recombinant human granulocyte macrophage colony-stimulating factor (rhGM-CSF) was specifically produced from rice cell culture through use of a recombinant technique in our laboratory. The effect of rhGM-CSF on promotion of deep second-degree burn wound healing on the back skin of a hamster model was evaluated through a randomized and double-blind trial. As macroscopic results, hamster skins of the experimental groups showed earlier recovery by new epidermis than the control groups. Immunohistochemical reactions of proliferating cell nuclear antigen and transforming growth factor-b1, which are indicators of cell proliferation, were more active in the experimental group, compared with the control group. On electron microscopy, basal cells in the epidermis of the experimental group showed oval nuclei, prominent nucleoli, numerous mitochondria and abundant free ribosomes. In addition, fibroblasts contained well-developed rough endoplasmic reticulum with dilated cisternae. Bundles of collagen fibrils filled the extracellular spaces. Particularly, ultrastructural features indicating active metabolism for regeneration of injured skin at 15 days after burn injury, including abundant euchromatin, plentiful free ribosomes, and numerous mitochondria, were observed. These findings suggest that use of rhGM-CSF could result in accelerated deep second-degree burn wound healing in animal models.

• Journal of dental hygiene science
• /
• v.21 no.4
• /
• pp.251-259
• /
• 2021

Background: The purpose of this study was to investigate the effects of commercially available calamansi soju and other alcoholic beverages on the microhardness and erosion of resin restorations. Methods: In this study, we evaluated the effects of Calamansi soju, Chamisul fresh, Cass fresh, and Gancia Moscato D'asti on resin restorations. Jeju Samdasoo and Coca-Cola were used as negative and positive controls, respectively. Specimens to be immersed in the beverages were manufactured using composite resin according to the product instructions. In each group, the surface microhardness was measured using a surface microhardness instrument before and after immersion for 5, 15, 30, and 60 minutes. The pattern of change in the surface of the composite resin was observed under a scanning electron microscope (SEM). Paired t-tests, one-way ANOVA, and repeated measures ANOVA were performed to compare the surface microhardness of the specimens, and the Tukey test was used as a post hoc test. Results: The pH of all beverages except Jeju Samdasoo was <5.5, which is the critical pH that can induce erosion. The difference in surface microhardness of the composite resin before and after immersion for 60 minutes was significant in all groups. In particular, the largest change in surface microhardness was observed in the calamansi soju group. In the SEM analysis, loss of composite resin was observed in all groups except the Jeju Samdasoo group, and rough surfaces with pores of various sizes were observed. Conclusion: In this study, all beverages except Jeju Samdasoo decreased the microhardness of the composite resin surface, and it was confirmed that calamansi soju had the greatest change.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1469-1475
• /
• 2004

Skin is the most frequently exposed tissues to oxidative stress from exogenous and endogenous sources. Dietary antioxidants, which suppress oxidative stress including reactive oxygen metabolites, play an important role in protecting skin from deleterious reactive oxygen species. Kimchi containing lots of antioxidative compounds shows anti-aging effect on skin. Therefore the morphologic changes on the skin of hairless mice fed diets containing Korean cabbage, mustard leaf, and buchu kimchi for 16 weeks were determined. Although epidermal thickness was decreased with age, kimchi prevented this thinning of epidermis compared to control group. In kimchi groups, the staining area of cytokeratin was smaller and stratum corneum was thinner than control group. It suggests that various kinds of kimchi diets prevent the increase of keratinization in epidermis with aging. Type Ⅳ collagen, a major structural protein of basement membrane supporting matrices, existed greater amount in kimchi groups than control group, especially in mustard leaf kimchi group. Rough endoplasmic reticulum (RER) of fibroblast was well developed in dermis of Korean cabbage and mustard leaf kimchi groups, which means collagen synthesis at dermis increased in those kimchi groups. This morphological changes of skin suggest that kimchi consumption can retard skin aging due to the presence of antioxidant and anti-aging compounds, especially some components of mustard leaf kimchi may largely affect on the skin rejuvenescence.

• Applied Microscopy
• /
• v.31 no.2
• /
• pp.175-184
• /
• 2001

This study aims demonstrate the effect of chitosan, one of the natural chelator, on the ultrastructural changes in the mouse liver caused by $HgCl_2$. The experimental group was divided in two groups; group A and group B. The group A administrated $HgCl_2$ (5.0 mg/kg) to the oral. The group B treated with $HgCl_2$ (5.0 mg/kg) and chitosan (3%) solution, 2 times/day). Each group was observed 24, 48, 72 and 96 hours after treated $HgCl_2$ and chitosan. Histological changes of the livers were investigated by electron microscope. 1. Croup A Nuclear membrane was shrinked. The inner and outer membrane of the mitochondria were dilated. Destruction of lamellae of rough endoplasmic reticulum showed. Smooth endoplasmic reticulum showed over cytoplasm. 2. Group B Nuclear membrane was more rounded, The cristae of the mitochondria were almost normal shape and electron-density showed compacted. Dilation of inner cavity of rough endoplasmic reticulum showed at the pre-time but formed typical lamellae at the 48Hrs. Smooth endoplasmic reticulum showed over cytoplasm. Therefore, we concluded that chitosan has significantly protective effects in liver to harmful $HgCl_2$.

• Journal of Animal Environmental Science
• /
• v.17 no.2
• /
• pp.101-106
• /
• 2011

One hundred and forty-four cross-bred market pigs weighing approximately 110 kg were randomly divided into four groups in a 2 (handling stress; minimal vs stimulated) ${\times}$ 2 (transport vehicle type; enclosed box vs conventional open) factorial arrangement of treatments. The stimulated handling stress group received overally rough handling including electric prod stimulation during loading, transport and lairage at least once at each step. All the animals received 3-h lairage prior to slaughter. Blood and longissimus dorsi muscle (LM) samples were taken at slaughter and after overnight chilling of the carcass, respectively. Plasma concentrations of stress indicators glucose, cortisol, creatine kinase and lactate dehydrogenase were greater in the stimulated vs minimal handling stress group. There were no interactions between the handling stress and transport vehicle type in their effects on these blood variables. The incidence of pale, soft and exudative (PSE) carcass and drip loss of LM, 24-h postmortem LM pH and color including the lightness and redness were not affected by the handling stress and transport vehicle type. In conclusion, results suggest that rough handling inflicts a stimulated stress on the animal, which is manifested by increased blood concentrations of stress indicators, and therefore should be avoided for animal welfare.

• Journal of Periodontal and Implant Science
• /
• v.38 no.sup2
• /
• pp.363-372
• /
• 2008

Purpose: This study compared the effects of coating implants with hydroxyapatite (HA) using an ion beam-assisted deposition (IBAD) method prepared with machined, anodized, sandblasted and large-grit acid etched (SLA) surfaces in minipigs, and verified the excellency of coating method with HA using IBAD. Material and Methods: 4 male Minipigs(Prestige World Genetics, Korea), 18 to 24 months old and weighing approximately 35 to 40 kg, were chosen. All premolars and first molars of the maxilla were carefully extracted on each side. The implants were placed on the right side after an 8 week healing period. The implant stability was assessed by resonance frequency analysis (RFA) at the time of placement. 40 implants were divided into 5 groups; machined, anodized, anodized plus IBAD, SLA, and SLA plus IBAD surface implants. 4 weeks after implantation on the right side, the same surface implants were placed on the left side. After 4 weeks of healing, the minipigs were sacrificed and the implants were analyzed by RFA, histology and histometric. Results: RFA showed a mean implant stability quotient (ISQ) of $75.625{\pm}5.021$, $76.125{\pm}3.739$ ISQ and $77.941{\pm}2.947$ at placement, after 4 weeks healing and after 8 weeks, respectively. Histological analysis of the implants demonstrated newly formed, compact, mature cortical bone with a nearby marrow spaces. HA coating was not separated from the HA coated implant surfaces using IBAD. In particular, the SLA implants coated with HA using IBAD showed better contact osteogenesis. Statistical and histometric analysis showed no significant differences in the bone to implant contact and bone density among 5 tested surfaces. Conclusion: We can conclude that rough surface implants coated with HA by IBAD are more biocompatible, and clinical, histological, and histometric analysis showed no differences when compared with the other established implant surfaces in normal bone.