• 한국광학회지
• /
• 제10권4호
• /
• pp.283-288
• /
• 1999

위상측정 간섭계(phase-measuring interferometer)를 이용한 표면조도(surface roughness) RMS값 수십 $\AA$급과 sub $\AA$급 반사경 기판의 조도 평가 특성이 조사되었다. 위상측정 간섭계의 조도 측정오차에 대한 위상 및 강도 데이터 평균의 영향이 조사되었으며, 이를 근거로 조도 측정오차를 최소화하는 최적의 위상 평균횟수와 강도 평균횟수가 도출되었다. 수십 $\AA$급 샘플의 경우, 조도 측정값은 데이터 평균의 영향을 적게 받은 반면, sub $\AA$급 반사경 기판 조도 측정시에 위상 평균 30회, 강도 평균20회에서 안정적이고, 신호 대 잡음비가 최대인 조도 측정값을 얻을 수 있었다. 이때의 조도 측정값은 광학적 heterodyne 간섭계에 의한 조도 측정결과와도 잘 일치하였다. 최적 데이터 평균횟수에서 표면조도 측정 반복도 역시 0.01$\AA$이하의 양호한 측정오차를 보였다.

• 산업기술연구
• /
• 제15권
• /
• pp.23-32
• /
• 1995

The methodology of automatic generation of tool path for rough cutting of a sculptured surface is proposed with the improved contouring method, unequal level line machining. Considering the surface shape and the diameter of the endmill, the distance between level lines is obtained. To improve MMR, initial rough cutting is processed with the large diameter endmill and the remained material is removed by the relatively small diameter endmill. Tool path is generated from the offset curve of respective level line and the interferences between the tool and workpiece are automatically avoided. After generating NC part program, the sculptured surface is machined at the vertical machining center. From the experimental results, total cutting length and machining time are reduced more effectively than conventional contouring methods.

• 정보저장시스템학회논문집
• /
• 제3권1호
• /
• pp.17-22
• /
• 2007

[ $TiO_2$ ] nanoparticles are added into UV curable resin to increase the refractive index of the cover-layer which is laminated on the media for cover-layer incident NFR. High refractive index is required for the cover-layer operating for the solid immersion lens optics with high effective numerical aperture. The eyepattern could be achieved from the cover-layer coated 20 GB ROM disc in which the refractive index of the cover-layer was 1.75, but the gap servo was unstable due to the rough surface of the cover-layer. Even though the light loss due to the nanoparticles is not serious, the rough microstructure is developed by adding the nanoparticles in the organic binder material. To achieve smooth surface for the stable gap servo, some special techniques should be added, for example the solubility of the nanoparticles should be enhanced by the optimization of the surface of the nanoparticles.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1995년도 제4회 학술강연회논문집
• /
• pp.157-168
• /
• 1995

Ignition of a reactive solid with rough surface by constant heat flux is studied. The geometry of surface is represented by a protrusion in shape of cone of infinite length. Ignition time and ignition criterion versus apex angle are determined, with the use of heterogeneous model of ignition. To study the effect of geometry on ignition the results are compared with the known results for the one-dimensional ignition of the semi-infinite body. It is shown, that: a) ignition time depends strongly upon the apex angle and is proportional to the angle to the second power; b) ignition criterion and ignition temperature do not depend strongly on angle. The ignition delay and the energy required for the successful ignition are substantially reduced compared to the one-dimensional case.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.8-15
• /
• 2004

A significant error in the end milling processes is generated due to using slender tools of which the strengths are not sufficient. In order to obtain the desired machining accuracy, therefore, it is general that at first the rough cut is implemented, then the finish cut is followed. The rough cut eliminates large volume and the finish cut does the remained part. This remaining portion after the rough cut is called as the finish allowance. Larger finish allowances make it hard to get precise dimensions at a following finish cut. Smaller finish allowances are helpful for good dimension, but it sometimes is responsible for inferior surface qualities and over cuts. This study suggests a guidance for the optimum finish allowance for machining accuracy improvement, in which the rough cuts are regulated to remain the desired margins without any over cuts. Some experiments were carried out with various cutting conditions including the change of tool strengths and depth of cuts, and also extended to up millings as well as down millings.

• 한국가구학회지
• /
• 제12권1호
• /
• pp.11-20
• /
• 2001

To investigate weathering and surface characteristics of coating film on lumbers coated with Hwangchil(varnish of Dendropanax morbifera), we carried out to investigate the resistance against discoloration, value of crack and surface characteristics of coating films on seven domestic lumbers and those of four introduced tropical lumbers. There was investigated to evaluate the properties of coating films by the varnish of Dendropanax morbifera. There was insignificant correlations between the hardness and moisture contents of each lumber treated by the varnish. There was no significant correlations between the thickness of coating film and the hardness, either. Although we investigated 11 wood species, we found only three species as resistance wood species against discoloration; Diospysos spp., Abies holophylla and Ulmus davidiana. The crack of coaing films was the largest on Zelkova serrata followed by Juglans sinensis, Cercidiphum japonicum, Tectona grands, Ulmus davidiana, Guibourtia tessmannii, Diospysos spp. and Dalbergia latifolia. However, there was no crack of coating films on the lumbers of Juniperus rigida, Prunus serrulata var. spontanea and Abies holophylla. The crack of coating film showed positive correlations with the thickness of coating film and hardness. The surface characteristics of the coating films evaluated on the basis of $R_{a}$ values indicated the lumbers of Ulmus davidiana($0.14{\;}{\mu}m$), Juniperus rigida($0.1 5{\;}{\mu}m$), Guibourtia tessmannii($0.19{\;}{\mu}m$), Dalvergia latifolia($0.20{\;}{\mu}m$) and Diospysos spp.($0.20{\;}{\mu}m$), Cercidiphum japonicum($0.24{\;}{\mu}m$) as good species while there was insignificant differences between softwoods and hardwoods. Tectona grands, Prunus serrulata var. spontanea and Abies holophylla showed rough surface with $1.53~2.63{\;}{\mu}m$ of $R_a$ values. The four kinds of rough indices($R_a,{\;}R_z,{\;}R_{max}{\;}and{\;}R_q$) showed very low correlations with moisture contents with the correlation coefficients. The $R_a{\;}and{\;}R_{max}$ also showed slight relationship with hardness.

• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.378-383
• /
• 2014

This study predicts the of the hysteretic friction of a rubber block sliding on an SMA asphalt road. The friction of filled rubber on a rough surface is primarily determined by two elements:the viscoelasticity of the rubber and the multi-scale perspective asperities of the road. The surface asperities of the substrate exert osillating forces on the rubber surface leading to energy dissipation via the internal friction of the rubber when rubber slides on a hard and rough substrate. This study defines the power spectra at different length scales by using a high-resolution surface profilometer, and uses rubber and road surface samples to conduct friction tests. I consider in detail the case when the substrate surface has a self affine fractal structure. The theory developed by Persson is applied to describe these tests through comparison with the hysteretic friction coefficient relevant to the energy dissipation of the viscoelastic rubber attributable to cyclic deformation. The results showed differences in the absolute values of predicted and measured friction, but with high correlation between these values. Hence, the friction prediction model is an appropriate tool for separating the effects of each factor. Therefore, this model will contribute to clearer understanding of the fundamental principles of rubber friction.

• 한국인쇄학회지
• /
• 제13권1호
• /
• pp.105-112
• /
• 1995

• 한국해안해양공학회지
• /
• 제12권3호
• /
• pp.130-138
• /
• 2000

일방향흐름에 의한 해류의 마찰력 계산을 위하여 Prandtl의 혼합길이 이론을 수심 전구간에 적용하고 난류의 세기와 수리조건에 따라 완난류와 전난류로 분류하여 마찰계수를 산정하는 개수로 마찰계수 산정방법을 제시하였다. 파랑과 해류의 합성류에 의한 해저마찰력을 계산하기 위하여 두 유속의 연직분포를 고려한 BYO 모형을 이러한 흐름특성을 반영하여 개선하였다. BYO 모형은 모든 유속의 연직분포가 해저면으로부터의 직선과 접선으로 만나는 점(Bijker point)을 도출하여 파운동 유속과 해류유속의 합성을 이 점에서 시행하여 일주기의 평균갑을 구하는 모형이다. 일방향흐름의 해류나 천해파에 의한 파운동이나 해저면 가까이 경계층흐름은 완난류, 천이난류, 전난류 등 세가지 종류로 대별된다. 그 중 완난류로 대별하여 두 경우에 대한 합성류 마찰력 산정방법을 제시하였다.

• 소음진동
• /
• 제7권1호
• /
• pp.71-79
• /
• 1997

The objective of this study is to investigate experimentally the effect of surface conditions of the plate on the impinging jet noise. The experimental results about the spectrum, the sound pressure level and the directivity are pressented and discussed in relation with the surface conditions. Regardless of the surface conditions, the pure tones of high level are generated at the same frequency band and the overall sound power level of impinging jets is much higher than that of the free jet. However, the velocity dependence of the sound pressure level and the directivity are different between smooth surfaces and rough surfaces. The dependence of sound pressure level on the jet velocity shows that the smooth surface generates quadrupole-type sound like free jets. However, the perforated or the rough surface radiates sound power exactly proportional to the sixth power of the jet velocity, indicating that the source is fixed dipole type. The directivities of 1/3 octave band sound pressure level for both the free and impinging jet show the peak directivity at 115$^\circ$ upstream, probably due to the refraction associated with velocity gradient.