• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.4
• /
• pp.195-200
• /
• 2007

These days, various and complex threads are developed, so it is necessary to develop the cutting a thread sensors for checking a cut thread in severe environment and it is very important to evaluate the quality of the cutting a thread sensors. The analysis of variance(ANOVA) method is very useful method on the quality evaluation field. In this study, the quality is evaluated by one way layout ANOVA method with the surface roughness data. The experiment is carried out by 3 sensors and the result show that the sensors have the good quality in precision.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.1
• /
• pp.108-115
• /
• 2000

This study was designed to compare the effect of polishing on surface roughness of composite resin. We used Z100(3M) composite resin and placed the composite resin in the hole (4mm thick and 4mm in diameter) of vinyl plate and polymerized it under manufacturer's instructions. Samples were divided into 5 groups by polishing methods. Group 1 was control: resin was polymerized under glass plate, Group 2: resin was polymerized without any polishing procedure, Group 3: resin was polymerized with a polishing procedure of abrasive disc, Group 4: bonding agent was applyed in thin layer and polymerized on the polished polymerized resin surface. Group 5: resin was polymerized under transparent celluloid strip. The surface roughness of each specimen was measured with Sufacoder SEF-30D (Kosaka lab. Ltd) under 0.08mm cut off, 0.05mm/s stylus speed, ${\times}40$ horizontal magnification, ${\times}5000$ vertical magnification. The results were as follows : 1. Group 1 showed the most smooth surface in this study. 2. Group 3 showed more rough surface than Group 2. Considering the surface roughness, it would be better to make the shape completely before polymerize the resin. To finish and polish after the polymerization of resin makes less smooth surface. 3. When we use the transparent celluloid strip, minimum finishing procedures are recommended. Any polishing procedure could not recover the smooth resin surface of celluloid strip. 4. Application and polymerization of the thin layer of bonding agent on the polished surface showed the minimum surface smoothing effect.

• Fashion & Textile Research Journal
• /
• v.9 no.4
• /
• pp.363-372
• /
• 2007

T-shirt has changed into advanced and stylish outwear by new paradigm, taste of consumer, awareness of recycling, spread of subculture, DIY culture, refusal of standardization and pursuit of high quality goods, etc. The purpose of this study was to analyze aesthetic characteristics of t-shirt designs that changed into diverse designs in world fashion college since 2000. The method of this study was to analyze documentaries, fashion magazines and internet fashion site. Aesthetic characteristics of t-shirt designs were expressed in deconstruction, mixture, integration and imitation. And each of external expressions and internal meanings was as follows: First, deconstruction was expressed in partial cutwork and three dimensional texture by sewing and construction drape. It means breaking the conventional structure and break-ing the boundary of t-shirt and another item and possibility of multi-vocal analysis. Second, mixture was expressed in collage of diverse ornaments, diverse fabrics and diverse patterns. It means exceeding the limit of material, elaboratenes and high quality of handwork, reflection of self-identity, brand image, fashion trend, consumer's psychology and mind of experimentation and couture. Third, integration was expressed in extension of length, width, use and style. It means unification of functions, deconstruction of items and extension of meanings and images. Forth, imitation was expressed in stain of dye, irregular and ripped sign, cut out, rough warp, drawing and washing, etc. It means subculture, rarity value, monopolization, diversity, familiarity, yearning and uniqueness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.820-823
• /
• 2000

The characteristics of wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of tungsten carbide in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension, the gap of deflection was decreased after thickness 60mm and discharge time of 6$\mu\textrm{s}$ due to the changing from fundamental mode to vibration mode. The deflection is the smallest at the water specific resistivity of 7.5 kΩ ㆍcm. The deflection is found to be decreased as increasing dwell time, and the result is due to the vibration of the pressure and the amount of the dielectric. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, was observed for rough wire-cutting EDM of STD-11. This phenomena is found to be decreased as the number of EDM is increased. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• Journal of the Korean Home Economics Association
• /
• v.38 no.11
• /
• pp.137-149
• /
• 2000

The Purpose of this study was to investigate actual condition about the modem adaptation of interior elements(floor, wall, ceiling, door & window) in traditional thatched roof house. The examined objects were interior space of 36 restaurants and cafes in Seoul and Kyung-Ki Do area. 1. Floor: Jang-pan was mostly alternated with linoleum which huts Jang-pan pattem. Wumul-maru was adapted from the original and Jang-maru was alternated with wood or linolium which has western state Jang-maru pattern. Mud was adapted from the original or alternated with slate stone or rough finish cement. 2. Wall: Rice proper was alternated with rice paper book witch has chinese character, paper for parcels or modem wall paper. Plaster-white paint or white handy coat. Mud-mud color paint or bamboo stick witch located in the mud wall orginal. Log-half cut log. Wooden board-without cross bar or irregular form. 3. Ceiling: Yondung-Chongang was mostly adapted from the original and Banja-Chonjang was alternated with rice paper book which has Chinese character or modem wall paper. 4. Door and Window: Ttisal-mun and Panjang-mun were adapted from the original. Wan and A’character door and window were simplified character itself.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.537-542
• /
• 2000

Wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of STD-11 in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension. The deflection is the smallest at the speed of wire of 10.6m/min and the water specific resistivity of 5k$\Omega$.cm. The deflection is found to be decreased as increasing dwell time. But if the water pressure is high, it is found not to be changed after the vibration of 4sec. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, is observed for rough wire-cutting EDM of STD-11. This phenomena is found to be similar in spite of the change of EDM energy level. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• Journal of the Korean Society of Costume
• /
• v.46
• /
• pp.49-66
• /
• 1999

The bisexuality deconstructivity and diversity that are great characteristics on the comtemporary fashion are showed in the fashion collections. The purpose of this paper is to investigate and analyze the influence of these characteristics made by the post modern-feminism fashion through the cultural pattern analysis. The post modern-feminism was analyzed by dividing the cultural pattern into 1) the deconstructivity of androcentrism -This characteristic was presented in the costume design that breaks the basic from of the line color and quality of the material showing in men's clothes. 2) By rejecting main current fashion -Subculture style appeared in main current fashion the boundary of main and anti-main current fashion was vagued and the phenomena that the identity of subgroup was weakened were showed. 3) In the coexistence of double-sided value -This characteristic was presented in the cross-dressing fashion that cut away women's slender part and men's rough part. 4) In the open-minded thought of gender -This tendency was reached an extreme from excessive exposure to design which gives the sexual stimulus. This paper is expected to be helpful to understand the contemporary fashion by treating the cultural category associated with post-modern feminism in relation to contemporary fashion and to establish the direction of 21 century fashion.

• Food Quality and Culture
• /
• v.2 no.1
• /
• pp.27-31
• /
• 2008

The objective of this study was to develop sensory lexicons that can be utilized for various types of tofu such as pressed, unpressed, and tofu made from germinated soybeans, using generic descriptive analysis. In the first phase of the experiment, trained descriptive panelists developed and defined the appearance, aroma, flavor, and texture attributes that are commonly present in tofu. Then, the sensory characteristics of seven types of tofu were analyzed using the sensory lexicons established in the initial stage of the experiment. Four appearance, 6 odor/aroma, 6 flavor/taste, 7 texture, and 4 aftertaste attributes were identified, and reference standards were established for most of the terms in order to facilitate the understanding of the attribute definitions. The intensities of the sensory attributes were measured on a 15-point scale. Statistical analyses, including analysis of variance and principal component analysis, were used for the data. The seven tofu samples showed significant differences in the intensities of 22 attributes. The unpressed tofu samples were generally rated as being high in moistness, easy to cut, silky, and easy to swallow. The pressed tofu, on the other hand, was salty, astringent, beany, hard, and rough in texture. The tofu made with germinated soybeans was characterized as having a strong cooked bean flavor, salty and astringent aftertaste, and hard texture. Overall, the attributes of moistness, easy to swallow, and silkiness showed strong positive correlations; hardness and sticks to teeth were also positively correlated to each other.

• Elastomers and Composites
• /
• v.58 no.3
• /
• pp.103-111
• /
• 2023

The abrasion resistances of silica-filled styrene-butadiene rubber (SBR) compounds prepared with and without dicyclopentadiene resin (SBR-R and SBR-0, respectively) were studied using four different abrasion testers, namely cut and chip (CC), Lambourn, DIN, and laboratory abrasion tester (LAT100). The effect of the resin on the abrasion behavior was elucidated by analyzing the morphologies and size distributions of wear particles. All the wear particles had rough surfaces, but those obtained in the Lambourn abrasion test exhibited relatively smooth surfaces. The size distributions of the wear particles showed different trends depending on the abrasion tester and the rubber compound; however, most of the wear particles were larger than 1000 ㎛. The SBR-R sample showed a wide range of particle sizes (from 63 ㎛) in the LAT100 abrasion test and majority of the wear particles were 500-1000 ㎛, whereas the SBR-0 sample had the most distribution of larger than 1000 ㎛. The abrasion rates of SBR-0 sample were lower than those of the SBR-R sample for the CC and LAT100 abrasion tests, but the Lambourn abrasion test result showed the opposite trend. Addition of the resin influenced the abrasion behavior, however the effect varied depending on the type of abrasion tests.

• The Journal of Korean Academy of Prosthodontics
• /
• v.17 no.1
• /
• pp.23-34
• /
• 1979

In this study, the adhesive strength of three commercial polycarboxylate cements to ten types of dental casting alloys, such as gold, palladium, silver, indium, copper, nickel, chromium, and human enamel and dentine were measured and compared with that of a conventional zinc phosphate cement. The $8.0mm{\times}3.0mm$ cylindrical alloy specimens were made by casting. The enamel specimens were prepared from the labial surface of human upper incisor, and the dentine specimens were prepared from the occulusal surface of the human molar respectively. Sound extracted human teeth, which had been kept in a fresh condition since, extraction, were mounted in a wax box with a cold-curing acrylic resin to expose the flattened area. The mounted teeth were then placed in a Specimen Cutter (Technicut) and were cut down under a water spray, and then the flat area on the all specimens were ground by hand with 400 and 600 grit wet silicone carbide paper. Two such specimens were then cemented together face-to-face with freshly mixed cement, and moderate finger pressure was applied to squeeze the cement to a thin and uniform film. All cemented specimens were then kept in a thermostatic humidor cabinet regulated at $23{\pm}2^{\circ}C.$ and more than 95 per cent relative humidity and tested after 24 hours and 1 week. Link chain was attached to each alloy specimen to reduce the rigidity of the jig assembly, and then all the specimens were mounted in the grips of the Instron Universal Testing Machine, and a tensile load was delivered to the adhering surface at a cross head speed of 0.20 mm/min. The loads to which the specimens were subjected were recorded on a chart moving at 0.50 mm/min. The adhesive strength was determined by measuring the load when the specimen separated from the cement block and by dividing the load by the area. The test was performed in a room at $23{\pm}2^{\circ}C.$ and $50{\pm}10$ per cent relative humidity. A minimum of five specimens were tested each material and those which deviated more than 15 per cent from the mean were discarded and new specimens prepared. From the experiments, the following results were obtained. 1) It was found that the adhesive strength of the polycarboxylate cement to all alloys tested was considerably greater than that of the zinc phosphate cement. 2) The adhesive strength of the polycarboxylate cements was superior to the non precious alloys, such as the copper, indium, nickel and chromium alloys, but it was inferior to the precious gold, silver and palladium alloys. 3) Surface treatment of the alloy was found to be an important factor in achieving adhesion. It appears that a polycarboxylate cement will adhere better to a smooth surface than to a rough one. This contrasts with zinc phosphate cements, where a rough helps mechanical interlocking. 4) The adhesion of the polycarboxylate cement with enamel was found superior to its adhesion with dentine.