• 제어로봇시스템학회논문지
• /
• 제21권6호
• /
• pp.577-582
• /
• 2015

This paper proposes an efficient detection of absolute position of a robot joint using two incremental encoders. We considers a robot joint comprising a motor, a reducer, two encoders, and a motor drive. An incremental(first) encoder provides motor's rotor position or input position of reducer while another incremental(second) encoder does output position of the reducer. A table is made where the relationship between the first and the second encoder counts is recorded. The key point is placed where the table is constructed: when a pulse occurs in the second encoder, there exists a corresponding unique count value of the first encoder. The absolute position is detected using the table by searching the second encoder position corresponding to the first encoder count value when a pulse occurs in the second encoder. The proposed method needs a small rotation, as just one second encoder's pulse angle, for the initial absolute position detection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.629-630
• /
• 2006

This paper describes a novel sensorless excitation position detecting method of Switched Reluctance Motor(SRM) drive. A suitable excitation pattern of each phases is determined by comparison of detecting current without an inductance estimation. The principle of the rotor position estimation is based on the detection of phase current according to rotor position. This sensorless method is very simple and gives efficient control of drive system. The suggested method is verified by experiments.

• 전력전자학회논문지
• /
• 제8권4호
• /
• pp.344-350
• /
• 2003

본 논문에서는 스위치드 릴럭턴스 모터의 새로운 회전자 초기 위치 추정법을 제안한다. 회전자의 위치검출을 하기 위하여 서치 코일을 사용하는 경우 센서비용감소, 부피감소, 강인성 증대, 사용범위의 확대 등 많은 장점이 있다. 그러나 모터의 회전자가 초기에 회전하지 않기 때문에, 서치코일에 유기되는 기전력이 존재하지 않아 회전자의 초기 위치검출에 어려움이 있었다. 본 논문에서는 유클리디안 제곱거리(Squared Euclidean Distance)를 사용하여 초기에 회전자가 정지해 있을 경우에도 회전자의 위치를 정확하게 추정하는 방법을 제시하였다. 이를 위하여 시뮬레이션을 실시하였고 이를 토대로 실험한 결과 정확한 초기 회전자 위치를 추정함으로써 본 논문에서 제시한 방법의 타당성을 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.352-361
• /
• 2018

This paper proposes a sensing system of the Halbach array permanent magnet spherical motor(PMSM). The rotor position can be obtained by solving three rotation angles, which revolves around 3 reference axes of the stator. With the development of 3-D hall sensor, the position identification problem of the Halbach array PMSM based on rotor magnetic field is studied in this paper. A nonlinear and serious coupling relationship between the rotation angles and the measured magnetic flux density is established on the basis of the rotation transformation theory and the magnetic field model. In order to get rid of the influence on position detection caused by the harmonics of rotor magnetic field and the stator coil magnetic field, a sensor location combination scheme is proposed. In order to solve the nonlinear equation fast and accurately, a new position solution algorithm which combines the merits of gradient projection and particle swarm optimization(PSO) is presented. Then the rotation angles are obtained and the rotor position is identified. The validity of the sensing system is verified through the simulation.

• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1004-1010
• /
• 2020

본 논문은 단상 영구자석 동기전동기의 초기 회전자 자극 검출 기법을 제안한다. 대상 전동기는 저속 및 정지 상태에서 역기전력을 기반으로 위치 정보를 얻을 수 없다. 따라서 초기 개루프 기동이 필요하며 이 과정에서 저 전류 및 소프트 기동을 위한 초기 회전자 위치 정보가 필요하다. 제안하는 초기 회전자 자극 검출 알고리즘의 경우 비대칭 공극의 영향 및 영구자석 자속의 영향을 고려하였으며, 고주파 전압 신호 주입을 기반으로 정확한 검출을 위한 오프셋 전압을 이용하였다. 이때 고주파 전압 신호로부터 유도된 고주파 전류의 경우 가상의 dq축을 이용하여 유도된 전류의 최댓값 취득을 통해 회전자 영구자석 자극을 판별한다. 본 논문에서는 센서리스 운전의 저전류 및 소프트 기동을 위해 제안된 초기 회전자 자극 검출 알고리즘을 홀센서 신호를 근거로 효용성 및 타당성을 다수의 실험을 통해 검증하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.180-184
• /
• 2007

최대 토크를 발휘하도록 정현파형 연구자석형 동기전동기를 구동하기 위해서는 회전자 절대위치에 동기화된 120도 위상차를 갖는 3상 정현파 전류 입력이 고정자 코일에 요구된다. 그러므로 회전자 절대위치 검출이 필연적이다. 그리고 고정자 자계와 회전자 자계 사이의 90도 위상 관계가 정류 동작에 의해 유지 되야 한다. 정류를 위한 절대 위치 검출은 일반적으로 모터 축에 부착된 엔코더 출력 신호의 분석에 의해 이루어진다. 본 연구는 현대의 엔코더 시스템을 부착한 모터의 절대위치를 검출 할 수 있는 신호처리 논리회로 설계를 목적으로 하며, 고정자 코일에 정현파 전류 입력을 만들어주기 위한 삼상 기준파형을 발생시킨다.

• 동력기계공학회지
• /
• 제15권3호
• /
• pp.65-69
• /
• 2011

This paper introduces the multi-coil eddy current sensor and its characteristic in magnetic material gas turbine rotor. In the past, magnetic particle inspection method was used for qualitative defect evaluation in magnetic material gas turbine rotor. And the ultrasonic inspection method was used for quantitative defect evaluation. Nowadays, eddy current method is used in magnetic gas turbine rotor inspection due to advanced sensor design technology. We developed multi-coil eddy current sensor for the rotor dovetail inspection. At first, rotor stress is analyzed for the determination of sensor position and number. The sensor coils are designed to cover the stress concentration area of rotor dovetail. We select optimum frequency according to material standard penetration data and experiment results. The rotor mock-up and artificial defects were made for the signal detection and resolution analysis of multi-coil eddy current sensor. The results show that signal detection and resolution capabilities are enhanced in comparison to the commercialized sensor enough for the gas turbine rotor inspection. So, this developed multi-coil eddy current sensor substituted for commercialized one and it applied in real gas turbine rotor inspection.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.709-712
• /
• 2000

In general three position sensors are needed to drive three phases SRM. Single position sensor driving method for three phases Switched Reluctance Motor(SRM) is proposed in this paper. By using single position sensor the cost of SRM is reduced. But position sensor the cost of SRM is reduced. But position detection at the staring is needed for single position sensor driving method. In this paper we propose the active align method to detect the relative position of rotor to three phases and align to the nearest phase. We proved the validity of the method by experiment and compare with other method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.229-231
• /
• 2005

A sensorless control scheme for the switched reluctance motor (SRM) drive at speed control is presented in this paper. In this paper proposes a very simple method to estimate the rotor position of a switched reluctance motor. By on-line estimating the self-inductance of the motor, the rotor position of the SR motor is obtained, and a closed-loop drive system can be achieved. Proposed methods can easy implement to application with sensorless SR motor drive system. SR motor simulation executed with self inductance estimation and result represented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.768-773
• /
• 1998

The speed control of SRM(Switched Reluctance Motor) needs the accurate position and speed data of rotor. This information is generally provided by a shaft encoder or resolver. In some cases, the environment is which the motor operates may cause difficulties in maintaining the satisfactory position detection performance. Therefore, the elimination of the position and speed sensor has gained wide attention. In this paper, a new algorithm for estimation of rotor position and speed is described for the SRM drives. This method uses is nonlinear adaptive observer using the MRAS(Model Reference Adaptive System). The observer is proved by Lyapunov Stability Theory. This algorithm was implemented with a TMS320C31 DSP. Experiment results prove that the observer is able to estimate the speed and position with a little errors.