• 한국항공우주학회지
• /
• 제39권3호
• /
• pp.210-217
• /
• 2011

대칭익형 단면을 가지는 모형 깃 끝와류의 후류유동구조의 전개과정을 관찰하기 위하여 2차원 LDV 시스템을 이용하여 끝와류의 회전성분과 축성분을 상평균 기법으로 측정하였다. 비대칭익 로터 깃의 특징에 비하여 대칭익 로터깃의 끝와류는 $27^{\circ}$ 부근까지 성장 과정이 진행되어 다소 늦게 형성되었으며 그 이후부터 상대적으로 완만하게 확산모드가 진행되었다. 회전성분은 실험이 진행된 $360^{\circ}$ 까지 Vatistas의 n=2모델에 우수한 접근성을 보이면서 자기상사성을 갖는 것으로 관찰되었고 축방향성분은 비대칭익에 비하여 훨씬 강한 세기로 나타나면서 정규분포 성향을 나타내었다. 이들의 결과들은 대칭익의 경우 로터의 추력 발생면에서 끝단손실이 상대적으로 큰 것으로 확인이 되었다.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.77-82
• /
• 2008

Strain-gauges have been dominantly used to measure strain at various points on a rotor, however, either a slip ring or telemetry has to be used to send sensor signals to data acquisition instruments at stationary side. Both slip ring and telemetry have numerous inherent problems which force severe limitations in real applications. This paper introduces a new rotor condition monitoring system using FBG(Fiber Bragg Grating) sensors and a rotary optical coupler. A single optical fiber with many FBG sensors is installed on the rotor and an optical dynamic interrogator is installed at stationary side. The sensor signal connection between rotating part and stationary part is made by the rotary optical coupling method which makes use of light's unique characteristic-light travels through space. Broad band light source from the interrogator travels to the optical fiber on the rotor and reflected FBG sensor signals travel back to the optical fiber on stationary side and are connected to the interrogator. Rotary optical coupler's insertion loss change due to rotation is compensated by using a reference sensor installed at the center of the rotor. The proposed system's performance has been successfully demonstrated by accurately measuring strains at 5 points on a blade rotating at high speed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.92-98
• /
• 2003

Turbine blades experience significant surface degradation with service. This paper presents experimental evidence of blade surface roughness reducing turbine efficiency. Performance tests were conducted in a low speed, single-stage axial flow turbine rig with roughened blade surfaces. Sheets of sandpaper with equivalent sandgrain roughnesses of 106 and $400{\mu}m$ were used to roughen the blades. In these tests, effects of roughened stator vanes and rotor blades were separately evaluated. In the fully rough regime ($k_{s}=400{\mu}m$), the experimental results show an 11 percent decrease in normalized efficiency with roughness only on stator vanes ; an 8 percent decrease with roughness only on rotor blades ; and a 19 percent decrease with roughness on both the stator and rotor blades. In the transitionally rough regime ($k_{s}=106{\mu}m$), the trends are similar approximately 4 percent decrease with either roughened stator or roughened rotor and an 8 percent decrease with roughness on both stator and rotor blades. Thus, roughened stator vanes incur more performance penalty than roughened rotor blades.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.590-593
• /
• 2009

Tidal current power system is one of ocean renewable energies that can minimize the environmental impact with many advantages compared to other energy sources. Not like others, the produced energy can be precisely predicted without weather conditions and also the operation rate is very high. To convert the current into power, the first device encountered to the incoming flow is the rotor that can transform into rotational energy. The performance of rotor can be determined by various design parameters including numbers of blade, sectional shape, diameter, and etc. The stream lines near the rotating rotor is very complex and the interference effects around the system is also difficult to predict. This paper introduces the experiment of rotor performance and also the effect of design parameter on the performance of HAT rotor by CFD.

• 항공우주시스템공학회지
• /
• 제8권3호
• /
• pp.41-46
• /
• 2014

Fatigue evaluations for the rotor blades of commercial or military rotorcraft have been carried out using the safe life concept since 1950s. Particularly, in the case of a rotor blade made of a composite material, a highly reliable fatigue life could be predicted by evaluation the cumulative damage using combination of fatigue life curve and load spectrum. However, there is a limit in adequately evaluating the strength reducing phenomena caused by damages or defects generated during the manufacturing process or impact damage induced by operational usages, using only the safe life concept. In this study, the fatigue evaluation process based on the damage tolerance concept is described and illustrated by means of successful application to substantiate the retirement time of composite rotor blades.

• 한국항공우주학회지
• /
• 제37권10호
• /
• pp.975-983
• /
• 2009

본 논문은 동축반전 로터 블레이드의 성능 특성 파악을 위한 선행연구로서, 단일 로터 블레이드에 대한 공력 데이터 획득 및 성능 특성을 확인하기 위한 연구에 중점을 두었다. 이를 위해 제자리 비행 상태에서 추력과 토크의 측정이 가능한 소형 로터 블레이드용 회전 시험장치를 구성하고 제작하였다. 로터 회전 시험장치는 회전장치부, 센서부, 그리고 데이터 획득 시스템으로 구성되었으며, 고정된 회전속도에서 콜렉티브 피치각을 변화시키면서 추력과 토크를 측정할 수 있도록 하였다. 이를 통하여 저 레이놀즈 수 ($Re{\approx}3{\times}10^5$) 영역에서 운용되는 단일 로터의 제자리 비행 성능 시험을 수행하였고 소형 로터 블레이드의 제자리 비행 성능을 획득하여 로터 회전 시험장치의 성능을 검증하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.206-209
• /
• 2001

본 논문에서는 헬리콥터용 힌지없는 로터 시스템의 축소 복합재료 블레이드의 개발 과정을 소개한다. 블레이드 설계에는 자체 보유의 CORDAS 프로그램을 이용하였으며 블레이드 동역학 해석에는 헬리콥터용 해석 프로그램인 Flightlab 상용 프로그램을 이용하였다. 힌지없는 허브에 설계된 복합재료 로터 블레이드를 연결하여 동적 특성을 분석하였으며 그 결과를 이용하여 설계 변경하는 과정을 수행함으로써 최적의 설계값을 구하는 과정을 기술하였다. 효과적인 성형 공법을 정립하여 설계된 축소 복합재료 블레이드를 제작하였다. 본 연구를 통해 복합재료 블레이드 개발 과정에 대한 경험을 축적하였으며 축적된 기술을 관련 분야에 적용할 예정이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.521-524
• /
• 2009

This study describes aerodynamic noise of high speed wind turbine system, which is invented as a new concept in order to reduce the torque of main shaft, for design parameters of the rotor blade. For parametric study of high speed rotor aerodynamic noise, Unsteady Vortex Lattice Method with Nonlinear Vortex Correction Method is used for analysis of wind turbine blade aerodynamic and Farassat1A and Semi-Empirical are used for low frequency noise and airfoil self noise. Parameters are chord length, twist and rotational speed for this parametric research. In the low frequency range, the change of noise is predicted the same level as each parameters varies. However, in case of broadband noise of blade, the change of rotational speed makes more variation of noise than other parameters. When the geometric angles of attack are fixed, as the rotational speed is increased by 5RPM, the noise level is increased by 4dB.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권2호
• /
• pp.106-116
• /
• 2009

In order to investigate change of vortex structures and its evolving proceses, two dimensional LDV system was used for measurement of velocity vectors of tip vortex, and PIV system was also used for visualizations of tip vortex array for two bladed rotor, respectively. Experiments provided vortex locations, tangential and axial velocity components of tip vortex at six wake ages of 9.5, 10.5, 60.5, 99.5, 129.5, 169.5 and corresponded six wake ages shifted with 180 degrees per each. It was resulted that tip vortices generated by the first blade satisfy Landgrebe's model for their vortex locations even after they were accelerated by the second blade in downstream. Tangential velocity components of tip vortices follow Vatistas' n=2 model on both inside and outside regions of rotor slipstream without loss of vortex circulation. Axial velocity profiles revealed that there were small but significant perturbations just outside the primary vortex core which implies the second blade affects the wake substantially. It was also found that tip paths of each blade were not willing to be coincided intrinsically.

• International Journal of Fluid Machinery and Systems
• /
• 제7권1호
• /
• pp.16-27
• /
• 2014

Double-blade vertical axis wind turbines (DB-VAWTs) can improve the self-starting performance of lift-driven VAWTs. We here propose the quadruple-multiple streamtube model (QMS), based on the blade element momentum (BEM) theory, for simulating DB-VAWT performance. Model validity is investigated by comparison to computational fluid dynamics (CFD) prediction for two kinds of two-dimensional DB-VAWT rotors for two rotor scales with three inner-outer radius ratios: 0.25, 0.5, and 0.75. The BEM-QMS model does not consider the effects of an inner rotor on the flow speed in the upwind half of the rotor, so we introduce a correction factor for this flow speed. The maximum power coefficient predicted by the modified BEM-QMS model for a DB-VAWT is thus closer to the CFD prediction.