• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.382-384
• /
• 1996

This paper introduces the controller development of booster multi-pump system with constantly estimated control algorithm. Through analyzing by the experiment of optimal pressure with a certain flow rate. The larger pressure processing apparatus in microprocessor makes optimal water-supplying. This method is implemented with the only pure control algorithm without any other mechanical or circuitry apparatus. Also, Pump's life is lengthened by exchanging simple on, off and rotational inverter control. Optimal condition for pump is adjusted by the inverter control, and compact control panel helps the booster system install in real field.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.245-249
• /
• 2007

본 연구에서는 모델 기반(Model-Based) 성능진단에 신경회로망을 적용하였고, SIMULINK를 이용하여 PW206C 터보축 엔진의 모델링을 수행하였다. 비행 고도, 비행 마하수, 가스발생기 회전수에 따른 다양한 운용영역의 성능데이터를 base로 하여 압축기, 압축기터빈, 동력터빈의 성능 저하에 대한 학습 데이터를 획득하고 역전파(Back Propagation Network)를 이용하여 훈련 하였다. 설계점 및 탈설계 영역에서 압축기, 압축기터빈, 동력터빈의 단일 손상 탐지를 수행한 결과 손상된 구성품을 잘 탐지함을 확인할 수 있었다.

• 한국추진공학회지
• /
• 제11권3호
• /
• pp.29-34
• /
• 2007

본 연구에서는 모델 기반(Model-Based) 성능진단에 신경회로망을 적용하였고, SIMULINK를 이용하여 PW206C 터보축 엔진의 모델링을 수행하였다. 비행 고도, 비행 마하수, 가스발생기 회전수에 따른 다양한 운용영역의 성능데이터를 base로 하여 압축기, 압축기터빈, 동력터빈의 성능 저하에 대한 학습데이터를 획득하고 역전파(Back Propagation Network)를 이용하여 훈련하였다. 설계점 및 탈설계 영역에서 압축기, 압축기터빈, 동력터빈의 단일 손상 탐지를 수행한 결과 손상된 구성품을 비교적 잘 탐지함을 확인할 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.776-787
• /
• 2001

The turbofan engine performance analysis for a medium scale commercial aircraft was carried out and the LQR control scheme for performance optimization was studied. By using scaled component maps from well-known CF6 engine characteristics, the steady-state performance analysis result was compared with BR715-56 engine performance data. The transient performance analysis was performed with four fuel schedules. The linear simulation was done at the maximum take-off condition. The real time linear simulation was performed by interpolation of the system matrices, which used the least square method as the function of LPC rotational speed. By using linear system matrices of design point, the LQR controller which used control variables for the fuel flow and the LPC bleed air was designed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권2호
• /
• pp.139-143
• /
• 1995

Two hundred eighty weaned Targhee lambs were grazed on annual grass-subclover pastures for 84 d under continuous and rotational defoliation grazing system. At the end of the grazing season, twenty lambs weighing 44 kg were slaughtered directly off the pasture, whereas two groups of 20 lambs each were fed either a alfalfa pellet or a 50% alfalfa/50 concentrate pellet for additional 6 wk until they reached an average live weight of 50 kg. Carcass traits and loin chop palatability were compared. Lambs slaughtered directly off the pasture were lighter than desirable market weight and some lambs had less than adequate fat cover and approximately half of them were graded U.S. Good in quality. Overall conformation and leg muscling was inferior and loin chops were less tender, less juicy and less flavorful. The lambs on alfalfa pellets for 6 wk appeared to be ideal in terms of carcass quality (all Choice except one), fat cover and yield grade. They had better taste panel scores in all palatability traits than off-the-pasture lambs, and most loin chops were acceptable. The lambs on a 50% concentrate diet for 6 wk had a higher conformation score and a greater muscling in the legs. Loin chops had more marbling and better palatability than other groups. However, some lambs had an excessive fat cover and lower yield of retail cuts. It was concluded that additional feeding for 6 wk on alfalfa pellets until the live weight reached 50 kg(for Targhee lambs) was the best way of finishing lambs at the end of grazing season in the California rangeland.

• 대한기계학회논문집B
• /
• 제32권11호
• /
• pp.849-855
• /
• 2008

The paper addresses modeling and analysis of the part load performance of a hybrid fuel cell system integrating a polymer electrolyte membrane fuel cell(PEMFC) and a gas turbine(GT). The system is a pressurized one where the working pressure of the PEMFC is higher than the ambient pressure. In addition to the two major components, the system also includes auxiliary parts such as a steam reformer, a humidifier, and afterburner and so on. Based on design analysis, component off-design models are incorporated in the analysis program and part load operation is simulated. The mode for the part load operation of the PEMFC/GT hybrid system is a variable rotational speed operation. The operating characteristics and variations in the system efficiency and component performance parameters at part load are analyzed.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1310-1319
• /
• 2013

Resolvers are transducers that are used to sense the angular position of rotational machines. The analog resolver is necessary to use resolver to digital converter. Among the RDC software method, angle tracking observer (ATO) is the most popular method. In an actual resolver-based position sensing system, amplitude imbalance dominantly distorts the estimate position information of ATO. Minority papers have reported position error compensation of resolver's output signal with amplitude imbalance. This paper proposes new ATO algorithm in order to compensate position errors caused by the amplitude imbalance. There is no need premeasured off line data. This is easy, simple, cost-effective, and able to work on line compensation. To verify feasibility of the proposed algorithm, simulation and experiments are carried out.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.894-900
• /
• 2005

A new approach to the straightforward implementation of the unscented filter in a unit quaternion space is proposed for spacecraft attitude estimation. Since the unscented filter is formulated in a vector space and the unit quaternions do not belong to a vector space but lie on a nonlinear manifold, the weighted sum of quaternion samples does not produce a unit quaternion estimate. To overcome this difficulty, a method of weighted mean computation for quaternions is derived in rotational space, leading to a quaternion with unit norm. A quaternion multiplication is used for predicted covariance computation and quaternion update, which makes a quaternion in a filter lie in the unit quaternion space. Since the quaternion process noise increases the uncertainty in attitude orientation, modeling it either as the vector part of a quaternion or as a rotation vector is considered. Simulation results illustrate that the proposed approach successfully estimates spacecraft attitude for large initial errors and high tip-off rates, and modeling the quaternion process noise as a rotation vector is more optimal than handling it as the vector part of a quaternion.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.66-71
• /
• 2008

Two cases with circumferential grooves were designed for a transonic compressor, and 3-D numerical simulations were conducted for stall mechanism at three representative speeds. A conclusion can be drawn from the comparison between compressors with or without casing treatment that: with the rising of rotation speed, stall margin increases dramatically under the help of casing treatments, and the case with middle grooves has reasonable compromise between stall margin increment and efficiency cutting. At lower speed, the increment reduces, and grooves at the back of blade tip have more influence on stall margin. Further investigation shows there is a transition in mechanism of compressor stall with the decline of rotational speed: at high rotation speed, the expansion of stall margin mainly results from the suppression of tip leakage vortex by casing treatments, yet it benefits more from the depression of boundary layer separation from suction surface of blade tip.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.697-700
• /
• 2021

본 논문은 펌프 라이너 링의 재질 변화 및 간극 축소로 인해 펌프의 효율 증가 및 안정적인 유지가 가능하고 비상상황을 대비하여 물이 없는 상태에서도 유지보수가 가능한 신소재 라이너 링이 적용된 펌프에 대해 기술한다. 또한, 중대형 펌프는 설치 현장에 따라 펌프의 종류 및 사향이 다르며, 현장의 여건에 따른 성능변화가 발생한다. 본 논문은 펌프의 상태(초기값 설정 및 비상정지, 진동, 구동시간 및 ON/OFF횟수) 등을 모니터링 하여 사용자의 편리성이 증가되고, 펌프 성능 유지가 가능하며, 재난상황에 대비할 수 있는 펌프의 최상위 컨디션을 유지할 수 있는 시스템에 대해 기술한다.