• 한국입자에어로졸학회지
• /
• 제4권2호
• /
• pp.37-50
• /
• 2008

Concerns on centrifugal classifiers, of which have cut sizes are below few micrometers, have been increased and it is prospected to be used in extensive industries, such as manufacturing the fine minerals, cosmetics, advanced electric materials, and life science. This paper reviews the recent progress of research and development on the centrifugal classifiers. General categorization of classifiers for feeds was assessed and separation mechanism of the classifiers was followed. History of centrifugal classifiers was explored and some points to be improved were briefly indicated. Fundamental theory of the classification by centrifugal classifiers was pearly studied, and advanced and further understandings on factors affecting the separation or grading efficiency are described. Factors determining the classification precision and efficiency of centrifugal classifiers, such as geometry, rotational speed and inclined angle of rotating vanes, feed and air flow rates, and rotor dimensions are reviewed.

• Journal of Mechanical Science and Technology
• /
• 제17권2호
• /
• pp.246-253
• /
• 2003

The tribological mechanism between the valve plate and the cylinder block in oil hydraulic axial piston pumps plays an important role on high power density. In this study, the fluid film thickness between the valve plate and the cylinder block was measured with discharge pressure and rotational speed by use of a gap sensor, and a slip ring system in the operating period. To investigate the effect of the valve plate shapes, we designed two valve plates with different shapes . the first valve plate was without a bearing pad, while the second valve plate had a bearing pad. It was found that both valve plates behaved differently with respect to the fluid film thickness characteristics. The leakage flow rates and the shaft torque were also experimented in order to clarify the performance difference between the valve plate without a bearing pad and the valve plate with a bearing pad. From the results of this study, we found out that in the oil hydraulic axial piston pumps, the valve plate with a bearing pad showed better film thickness contours than the valve plate without a bearing pad.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2001년도 제16회 학술발표회 논문초록집
• /
• pp.54-58
• /
• 2001

본 연구에서는 MAT(Moisture Air Turbine) 사이클이 압축기 입구에 미세한 물방울을 분무함에 따라, 가스터빈 엔진의 성능을 향상시킬 수 있음을 제시하였다. 혼합물이 상변화하는 동안의 압축기 일은 이론적으로 등 엔트로피 압축 일로 고려하였다. 여기서 습증발의 영향을 고려함에 따라 압축기 일이 감소함을 알 수 있었다. 성능해석 프로그램을 이용해서 1000, 1210, 1350 rps 조건에서, 압축기 유입공기에 대한 1.5% 의 물 분무시 사이클 모델 계산을 이용해서 각각 21.7%, 20.2%, 18.4%의 출력이 증가함을 확인하였다. 또한 효율도 압축기 일의 감소에 의해 개선되어짐을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.345-349
• /
• 2007

본 연구에서는 계측 데이터의 성능 추이를 분석하여 엔진의 기계적 결함 여부를 탐지하기 위한 퍼지 경향감시 방법을 제안하였다. 경향감시 방법은 연료유량, 배기가스 온도, 로터회전수, 진동수와 같은 중요 엔진 파라미터를 모니터링하여 시간에 따른 변화를 분석하여 엔진 상태를 진단하는 것이다. 선형회귀분석을 통해 엔진 상태 변화를 수식화하고 퍼지 로직을 통해 진단 결과를 분석하여 예측되는 손상 원인을 제시한다.

• 한국추진공학회지
• /
• 제12권6호
• /
• pp.1-6
• /
• 2008

본 연구에서는 계측 데이터의 성능 추이를 분석하여 가스터빈 엔진의 결함 여부를 탐지하기 위한 퍼지 경향감시 방법을 제안하였다. 제안된 경향감시 방법은 연료유량, 배기가스 온도, 로터회전수, 진동수와 같은 중요 엔진 파라미터를 모니터링 하여 시간에 따른 변화를 분석하여 엔진 상태를 진단하는 것이다. 이를 위해 먼저 선형회귀분석을 통해 엔진 상태 변화를 수식화하고 퍼지 로직을 통해 진단 결과를 분석하여 예측되는 손상 원인을 제시한다.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.266-274
• /
• 2016

Many researchers have been trying to improve the propulsion efficiency of a propeller. In this study, the numerical analysis is carried out for the POW(Propeller Open Water test) performance of a propeller equipped with an energy saving device called PHVC(Propeller Hub Vortex Control). PHVC is aimed to control the propeller hub vortex behind the propeller so that the rotational kinetic energy loss can be reduced. The unsteady Reynolds Averaged Navier-Stokes(URANS) equations are assumed as the governing flow equations and are solved by using a commercial CFD(Computational Fluid Dynamics) software, where SST k-ω model is selected for turbulence closure. The computed characteristic values, thrust, torque and propulsion efficiency coefficients for the target propeller with and without PHVC and the local flows in the propeller wake region are validated by the model test results of KRISO LCT(Large Cavitation Tunnel). It is concluded from the present numerical results that CFD can be a good promising method in the assessment of the hydrodynamic performance of PHVC in the design stage.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제11권3호
• /
• pp.140-149
• /
• 2003

In these days, environmental concerns have been increased throughout the industry and community worldwide. To prevent the ozone depletion, ozone depletion potential of a refrigerant must be zero. Simultaneously, a refrigerant with low GWP (global warming potential) is very demanding to reduce green house effect. Chlorine-free HFC-l34a is a refrigerant widely used for automotive air-conditioning system because its destruction potential is ecologically zero. Although HFC-l34a has no ozone depletion potential, its global warming potential is so high that it is not considered as a perfect alternative refrigerant that is acceptable for long-term use. In this paper, experimental measurement has been carried out to analyze the performance characteristics of automotive air-conditioning system using HFC-152a, which has low GWP and zero ODP. Also mixed refrigerant that is composed of HFC-152a and $CF_3$ was applied to investigate an alternative possibility for the automotive air-conditioning system. As a result of this study, we could draw following conclusions; With respect to the variation of the rotational speed of compressor, outside air temperature and flow rate, the heat amount of evaporator and compressor and performance coefficient was varied.

• Nuclear Engineering and Technology
• /
• 제34권5호
• /
• pp.494-501
• /
• 2002

Radioactive Corrosion Products (CRUD) which are generated by the neutron activation of general corrosion products at the nuclear power plant are the major source of occupational radiation exposure. Most of the CRUD has a characteristic of showing strong ferrimagnetisms. Along with the new development and production of permanent magnet (rare earth magnet) which generates much stronger magnetic field than the conventional magnet, new type of magnetic filter that can separate CRUD efficiently and eventually reduce radiation exposure of personnel at nuclear power plant is suggested. This separator consists of inner and outer magnet assemblies, coolant channel and container surrounding the outer magnet assembly. The rotational motion of the inner and outer permanent magnet assemblies surrounding the coolant channel by driving motor system produces moving alternating magnetic fields in the coolant channel. The CRUD can be separated from the coolant by the moving alternating magnetic field. This study describes the results of preliminary experiment performed with the different flow rates of coolant and rotation velocities of magnet assemblies. This new magnetic filter shows better performance results of filtering the magnetite at coolant (water). How rates, rotating velocities of magnet assemblies and particle sizes turn out to be very important design parameters.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.275-281
• /
• 2001

While basic input parameters for the performance and noise of axial fan are flow rate, pressure rise, rotating speed, and fan diameter, the geometric parameters of blade are sweep angle, solidity, and camber angle. The sweep angle does not affect fan performance much, but on fan noise significantly. Solidity and camber angle are very critical design parameters acting on the fan performance directly. The solidity and camber angle are closely related, therefore they have to be carefully determined for the low-noise and high-performance fan. In This paper, different design points are selceted and also geometric parameters are deliberately changed for the comparison of fan noise. As a result, at the same performance, the input rotational speed affects radiated noise more significantly than others. When solidity and camber angle are increased more than those by iDesignFan／sup TM／ program, more noise is experienced. The blade sweep method and blade numbers at same solidity are observed to results in different levels of performance and noise.

• Structural Engineering and Mechanics
• /
• 제28권4호
• /
• pp.387-410
• /
• 2008

The fatigue damage accumulation rates of horizontally curved thin walled box-girder bridge have been estimated from vehicle-induced dynamic stress history using rain flow cycle counting method in the time domain approach. The curved box-girder bridge has been numerically modeled using computationally efficient thin walled box-beam finite elements, which take into account the important structural actions like torsional warping, distortion and distortional warping in addition to the conventional displacement and rotational degrees of freedom. Vehicle model includes heave-pitch-roll degrees of freedom with longitudinal and transverse input to the wheels. The bridge deck unevenness, which is taken as inputs to the vehicle wheels, has been assumed to be a realization of homogeneous random process specified by a power spectral density (PSD) function. The linear damage accumulation theory has been applied to calculate fatigue life. The fatigue life estimated by cycle counting method in time domain has been compared with those found by estimating the PSD of response in frequency domain. The frequency domain method uses an analytical expression involving spectral moment characteristics of stress process. The effects of some of the important parameters on fatigue life of the curved box bridge have been studied.