• 한국유체기계학회 논문집
• /
• 제10권3호
• /
• pp.25-32
• /
• 2007

The present paper deals with the heat/mass transfer characteristics for the rotating impingement/effusion cooling system. By changing the size and number of injection hole, its effects on heat/mass transfer are investigated and three different injection hole cases are considered such as LH, DH and SH, respectively. Reynolds number based on the effusion hole diameter is fixed to 3,330 and two jet orientations are considered. A naphthalene sublimation method is used to obtain the heat/mass transfer coefficients on the effusion plate. The LH case shows that the local heat/mass transfer is significantly varied by the rotation. Moreover, the low and non-uniform Sh distributions occur because the impinging jet is deflected by Coriolis force. Meanwhile, for DH and SH cases, the local heat/mass transfer coefficients are enhanced significantly compared to LH case and the rotation effect decreases with increasing the jet velocity. The averaged Sh value of DH and SH case rises up to 45%, 85% than that of LH case. However, the uniformity of heat/mass transfer deteriorates due to the steep variation of heat/mass transfer.

• 한국운동역학회지
• /
• 제21권1호
• /
• pp.39-46
• /
• 2011

The purpose of this study was to examine differences between players who bend the left elbow and those who stretch it during the forward swing from BST to BC in a 2-handed backhand stroke among outstanding high school tennis players, and to assess the detailed 3D rotational kinematic characteristics of the shoulder and the hip. Statistically significant differences were observed between groups in the longitudinal axis rotation angle of the shoulder and the angle between the shoulder and the arm at BST, and in the side to side movement of the shoulder, the up and down movement of the hip, the side tilt angular velocity of the shoulder, the side tilt angular velocity of the hip, and the front tilt angular velocity of the hip at BC. The difference in the longitudinal axis rotation angle of the shoulder between the 2 groups suggests a difference in the flexibility of the joint in the shoulder arm racquet system. The longitudinal axis rotation angular velocity of the shoulder reached its peak at 75 % of the duration of the analyzed segment and then decreased little by little until BC. This time is considered the stage for increasing the angular velocity of the upper arm, the forearm, the hand and then the racquet, which are more distal segments than the shoulder.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권1호
• /
• pp.1-12
• /
• 2000

The wake geometries of a two-bladed rotor in axial flights using a time-marching free-wake method without a non-physical model of the far wake are calculated. The computed free-wake geometries of AH-1G model rotor in climb flight are compared with the experimental visualization results. The time-marching free-wake method can predict the behavior of the tip vortex and the wake roil-up phenomena with remarkable agreements. Tip vortices shed from the two-bladed rotor can interact with each other significantly. The interaction consists of a turn of the tip vortex from one blade rolling around the tip vortex from the other. Wake expansion of wake geometries in radial direction after the contraction is a result of adjacent tip vortices begging to pair together and spiral about each other. Detailed numerical results show regular pairing phenomenon in the climb flights, the hover at high angle of attack and slow descent flight too. On the contrary, unstable motions of wake are observed numerically in the hover at low angle of attack and fast descent flight. It is because of the inherent wake instability and blade-vortex-interaction rather then the effect of recirculation due to the experimental equipment.

• 한국정보통신학회논문지
• /
• 제21권2호
• /
• pp.285-293
• /
• 2017

줄넘기는 줄을 돌리는 손동작과 뛰어오르는 동작이 결합된 운동으로 정확한 카운트를 위해서는 두 동작을 함께 고려해야 한다. 이전의 연구들에서는 단순 반복적인 운동인 윗몸일으키기, 팔굽혀펴기, 아령 운동과 함께 치부하여 하나의 동작만을 체크하여 카운트 하였다. 이것은 실제 줄넘기 동작과는 차이가 있으며 두 동작 중 하나의 동작만을 하고 있다면 확인해내지 못하는 문제가 있다. 본 논문에서는 6축 가속도 자이로 센서를 이용하여 두 동작을 모두 확인하고 카운트하는 방법을 제안한다. 가속도 센서를 이용하여 뛰어오르는 동작을 확인하며 자이로 센서를 이용하여 손동작을 확인한다. 이때 확인되는 값의 파형을 이용하여 줄넘기 횟수를 카운트하게 된다. 제안하는 방법은 실제 실험을 통하여 카운트 방법의 성능을 확인할 수 있다.

• 열처리공학회지
• /
• 제19권2호
• /
• pp.96-102
• /
• 2006

Development of Rotation-Cylinder Method(RCM) is given for Mg-Al-Zn-X(X=Sr) alloys, identifying some of the key factors that need to be controlled and indicating subsequent casting processes. Effects of Sr addition on the microstructure and mechanical properties of as-cast and T6 heat-treated Mg-Al-Zn-X alloys fabricated by the RCM were investigated. The microstructural and mechanical characterizations were performed by utilizing optical microscope, scanning electron microscope, transmission electron microscope, hardness test and ultimate tensile test. The solution and aging treatment time was varied to optimize the T6 heat treatment conditions, and experimental results were discussed. The grain size of Sr containing alloys was refined by increasing Sr content, but the tensile and yield strengths were increased by addition up to 1wt% Sr.

• Korean Journal of Acupuncture
• /
• 제33권4호
• /
• pp.149-156
• /
• 2016

Objectives and Methods : The aim of this study was to investigate twirling and supplementation and draining by analyzing ancient acupuncture literature and modern research papers, and to discuss the quantitative standards for the procedure. Results : Twirling supplementation and draining techniques were first described in Huang do neijing, after which they were recorded in various other ancient acupuncture texts. Not only were these techniques used in the active treatment of patient historically, but they also form the foundations of modern-day acupuncture treatment. Twirling supplementation and draining techniques described in ancient literatures can be divided into Yin and Yang. Examples of Yang characteristics include Up, Male, Morning, Hands, the governor vessel, Outside, and Left. The left rotation technique is a reinforcing method performed by moving the thumb forward while rotating the needle. Examples of Yin characteristics include Down, Female, Afternoon, Foot, the conception vessel(CV), Inside, and Right. The right rotation technique is a reducing method performed by moving the thumb backward while rotating the needle. Twirling supplementation and draining has been divided for four ways by classical literature and research that worked before. the direction of acupuncture, the stimulus-quantity of acupuncture, the performance of doctor(the uses of both hands, left and right hand) and the feeling of patient. Conclusions : Therefore, continuous research is required to implement Twirling supplementation and draining in a consistent manner. In addition, more active clinical trials using the techniques are necessary as well.

• Clinics in Shoulder and Elbow
• /
• 제5권1호
• /
• pp.29-36
• /
• 2002

Purpose : Cubitus varus deformity has been reported to cause ulnar neuropathy. We present five cases of tardy ulnar nerve palsy due to cubitus vus and analyzed the factors related to the nerve plasy caused by the deformity. Materials and Methods : Three men and two women were reviewed retrospectively and the mean age of the patients were 26 (range, 14-38). The average interval from initial fracture to nerve palsy was 19 years (8-32 years). The severity of symptoms, according to McGowan's classification, was grade I of 2 patients, grade Ⅱ of 3 patients. Carrying angle was an average of 18。 (30° -45° ). Internal rotation angle measured by Yamamoto's method was an average of 33° (30° -45° ). Results ㆍ The mean follow-up period was 53 months (35-70 months). Elbow pain and numbness of the fingers were relieved shortly after surgery. It revealed that anterior subluxation of the nerve due to internal rotation deformity and compression of the nerve between the medially shifted medial head of triceps and the medial epicondyle. Conclusion : The major entrapment point of the nerve is the fibrous band between the two heads of the flexor carpi ulnaris. The severe internal rotation deformity may contribute the cause of tardy ulnar nerve palsy in cubitus varus deformity.

• 한국안전학회지
• /
• 제8권1호
• /
• pp.47-53
• /
• 1993

Residual Deformation Analysis(RDA) is a new method for ratings of the continuous bridges. The RDA makes it possible to expand the inelastic steel girder bridge design method set forth in the American Association of State Highway Officals'(AASHTO) Guide Specifications for Alternate Load Factor Design Procedures for Steel Beam Bridges Using Braced Compact Sections(1986) into an inelastic rating method. It is a method to assess the residual moments and deformations that are set up in a beam that has been loaded into the post-elastic range This method combines classical elastic conjugate beam theory with linear moment-rotation relationships for midspan inelastic positive moment. The limit state is inelastic serviceability limit. which is defined as the ratio of the span to midspan inelastic deflection(C=L/D).

• 한국전문물리치료학회지
• /
• 제15권1호
• /
• pp.61-68
• /
• 2008

The aim of the study was to evaluate the effect of a disease-specific exercise (DSE) on temporomandibular joint (TMJ) function and neck mobility in TMJ dysfunction associated with ankylosing spondylitis (AS). Ten AS patients (seven males and three females) with TMJ dysfunction were recruited for this study. The DSE included exercises to correct head and neck posture and to improve the flexibility of the neck and TMJs. The patients attended treatment three times a week for 4 weeks, averaging 1 hour each session. Assessments were performed pretreatment, posttreatment, and 6 weeks after the completion of treatment. General physical status was assessed by four clinical measures (tragus-to-wall distance, modified Schober test, lumbar side flexion, and intermalleolar distance), the Bath ankylosing spondylitis function index (BASFI), and the Bath ankylosing spondylitis disease activity index. The main outcome measures included TMJ function (craniomandibular index (CMI)), and neck mobility (flexion, extension, rotation, and lateral rotation). None of the measures of general physical status, with the exception of BASFI, were significant1y different between the pretreatment, posttreatment, and 6-week follow-up (p>.05). However, CMI and all neck movements, except for extension, significant1y improved after the treatment (p<.05). These improvements were maintained during the follow-up period. The DSE used in the present study seems to be a clinical1y useful method for managing patients with symptoms from the stomatognathic system in AS. Further studies with more subjects and longer treatment times, including the follow-up period, will be conducted to validate these findings.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.227-233
• /
• 2010

본 원고는 직류전원에서 사용하는 직류용 소형전동기(motor)로 전력용 반도체 제어소자인 Power Transistor, MOSFET를 이용하여 전동기(motor) 구동의 드라이브 회로를 구성하고 전동기 동작원리와 정 역회전의 회전방향 제어에 대하여 다루고자 한다. 그리고, 제동운전 및 펄스폭 변조(PWM)에 의해 가변되는 회전속도제어 방법에 대해 기술하여 직류용 전동기(motor)의 기본적인 원리를 이해함과 더불어 마이크로프로세서를 이용한 다양한 전동기(motor) 제어방법을 제시하였다.