• 한국전산유체공학회지
• /
• 제16권3호
• /
• pp.1-7
• /
• 2011

As a preliminary design study to achieve target aerodynamic performance, this work was conducted on an original nozzle with 9 flutes in order to design a fluted nozzle with 12 flutes. The thrust and rolling moment of the nozzle with 12 flutes were analyzed using a CFD code according to the depth and rotation angle of the flutes. Based on this, a fluted nozzle with 12 flutes was optimized to yield the same thrust as that of the original nozzle with 9 flutes. The response surface method was applied for shape optimization of the fluted nozzle and design variables were selected to determine the depth angle and rotation angle of the flutes. An optimized shape that led to a thrust as strong as that of the original nozzle was obtained.

• Smart Structures and Systems
• /
• 제2권1호
• /
• pp.47-60
• /
• 2006

Bi-spectrum is a tool in the signal processing for identification of non-linear dynamic behvaiour in systems, and well-known for stationary system where components are non-linearly interacting. Breathing of a crack during shaft rotation is also exhibits a non-linear behaviour. The crack is known to generate 2X (twice the machine RPM) and higher harmonics in addition to 1X component in the shaft response during its rotation. Misaligned shaft also shows similar such feature as a crack in a shaft. The bi-spectrum method has now been applied on a small rotating rig to observe its features. The bi-spectrum results are found to be encouraging to distinguish these faults based on few experiments conducted on a small rig. The results are presented here.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1749-1754
• /
• 2004

In order to measure non-intrusively velocity profile in liquid metal flow, a modified electromagnetic flowmeter was designed, which was based on electromagnetic tomography technique. Under the assumption that flow is fully-developed, axisymmetric and rectilinear, the velocity profile was reconstructed after the flowmeter equation, the first kind of Fredholm integration equation, was linearized. In reconstruction process Tikhonov regularization method with regularization parameter was used. The reconstructed velocity profile had the nearly same as turbulent flow profile which was approximately represented as log law. In addition, flowmeter output for a fixed magnet rotation angle was linearly proportional to flow rate. When magnet rotation angle was $54^{\circ}$, axisymmetric weight function was nearly uniform so that the flowmeter gives a constant signal for any fully-developed, axisymmetric and rectilinear profile with a constant flow rate.

• Journal of Computational Design and Engineering
• /
• 제1권1호
• /
• pp.1-12
• /
• 2014

In this paper, we propose a new method of reconstructing the hand models for individuals, which include the link structure models, the homologous skin surface models and the homologous tetrahedral mesh models in a reference posture. As for the link structure model, the local coordinate system related to each link consists of the joint rotation center and the axes of joint rotation, which can be estimated based on the trajectories of optimal markers on the relative skin surface region of the subject obtained from the motion capture system. The skin surface model is defined as a three-dimensional triangular mesh, obtained by deforming a template mesh so as to fit the landmark vertices to the relative marker positions obtained motion capture system. In this process, anatomical dimensions for the subject, manually measured by a caliper, are also used as the deformation constraints.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.255-262
• /
• 1998

This paper presents a translation, rotation and scale invariant methodology for the recognition of closed planar shape images using the bispectrum of a contour sequence and the learning vector quantization(LVQ) neural classifier. The contour sequences obtained from the closed planar images represent the Euclidean distance between the centroid and all boundary pixels of the shape, and are related to the overall shape of the images. The higher order spectra based on third order cumulants is applied to tihs contour sample to extract fifteen bispectral feature vectors for each planar image. There feature vector, which are invariant to shape translation, rotation and scale transformation, can be used to represent two0dimensional planar images and are fed into a neural network classifier. The LVQ architecture is chosen as a neural classifier because the network is easy and fast to train, the structure is relatively simple. The experimental recognition processes with eight different hapes of aircraft images are presented to illustrate the high performance of this proposed method even the target images are significantly corrupted by noise.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.335-336
• /
• 2015

본 논문에서는 스위칭 주파수 신호 주입 센서리스 제어를 위한 정밀한 위치 오차 추정 기법을 제안한다. 제안한 방법에서는 위치 오차를 얻을 때에 작은 각도 근사법(Small-Angle Approximation)을 이용하지 않고 Rotation matrix를 이용하여 근사 없이 실제 위치 오차를 계산하였고, 90도까지 회전자 오차 측정 범위를 확대하였다. 이를 통하여 오차가 크게 발생하는 부하 변동이나 가감속 시에 과도상태특성을 개선할 수 있다. 제안한 방법은 실험을 통하여 그 유효성을 검증하였다.

• Structural Engineering and Mechanics
• /
• 제11권1호
• /
• pp.105-122
• /
• 2001

A new three-dimensional 13-node hexahedral element with rotational degrees of freedom, which is designated as MR-H13 element, is presented. The proposed element is established by adding five nodes to one of the six faces of basic 8-node hexahedral element. The new element can be effectively used in the connection between the refined mesh and the coarser mesh. The derivation of the current element in this paper is based on the variational principles in which the rotation and skew-symmetric stress are introduced as independent variables. Numerical examples show that the performance of the new element is satisfactory.

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.500-508
• /
• 2020

The rifling angle of artillery is an important parameter, and its determination plays a key role in the stability, hit rate, accuracy and service life of artillery. In this study, we propose an optical measurement method for the rifling angle based on angle error correction. The method is based on the principle of geometrical optics imaging, where the rifling on the inner wall of the artillery barrel is imaged on a CCD camera target surface by an optical system. When the measurement system moves in the barrel, the rifling image rotates accordingly. According to the relationship between the rotation angle of the rifling image and the travel distance of the measurement system, different types of rifling equations are established. Solving equations of the rifling angle are deduced according to the definition of the rifling angle. Furthermore, we added an angle error correction function to the method that is based on the theory of dynamic optics. This function can measure and correct the angle error caused by the posture change of the measurement system. Thus, the rifling angle measurement accuracy is effectively improved. Finally, we simulated and analyzed the influence of parameter changes of the measurement system on rifling angle measurement accuracy. The simulation results show that the rifling angle measurement method has high measurement accuracy, and the method can be applied to different types of rifling angle measurements. The method provides the theoretical basis for the development of a high-precision rifling measurement system in the future.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제27권1호
• /
• pp.62-73
• /
• 2000

본 논문에서는 기존의 칼라 특성을 이용한 내용 기반 영상 검색 방법을 적용 영역별로 분류 할 수 있는 기준을 제시하고, 그 기준에 의해 영상 내 공간 정보를 충분하게 표현할 수 있어 이동 및 회전 확대/축소 변형에 강한 영상 검색 방법을 제안한다. 일반적으로 칼라 특성을 이용한 내용 기반 영상 검색은 영상 내 공간정보를 충분하게 표현하지 못하여 이동 및 회전, 확대/축소 변형에 약한 단점을 지니고 있다. 이에 기존 연구에서는 인위적으로 영상을 여러 개로 분할하는 방법 등으로 공간 정보를 표현하고자 하였지만 특징 벡터의 수가 급격히 늘어남에 따라 검색 효율이 저하된다는 단점을 가지고있다. 본 논문에서는 기존의 방법을 사용된 칼라 객체의 상호 관계에 따라 1차와 2차 관계에 의한 방법으로 분류하고, 이동, 회전 특히 크기 변화(축소,확대)에 탁월한 성능을 보이는 칼라 객체의 3차 관계를 이용한 방법을 제안한다. 제안된 방법은 주어진 영상으로부터 양자화된 24개의 버킷을 생성해서 각 버킷의 히스토그램의 크기 순서로 세 개 버킷을 선정하고 그들의 평균 칼라 위치를 계산해서 그들 간의 상호 각도를 추출하여 영상의 특징 벡터로 사용하였다. 실험 결과 기존 방법보다 특히 영상의 크기 변화에 대해 좋은 결과를 얻을수 있었으며, 계산량도 적어 효율적임을 보여 주었다.

• International Journal of Fluid Machinery and Systems
• /
• 제2권3호
• /
• pp.254-259
• /
• 2009

In this paper it was attempted to treat the hydrodynamic journal bearing as a time-based nonlinear reaction source in each step of rotor rotation in order to observe the bearing effect more realistically and accurately in stead of the conventional method of simple linearized stiffness and damping. Lubrication analysis based on finite element method is employed to calculate the hydrodynamic reaction of bearing and Newmark's method was used to calculate the rotor dynamics in the time domain. Simulation for an industrial electrical motor showed remarkable results with differences compared to those by the conventional method in the dynamic behavior of the rotor.