• Korean journal of applied entomology
• /
• v.31 no.3
• /
• pp.205-240
• /
• 1992

In reality, it is a green revolution of the entire agricultural matrix in Korea that integrated pest control plays an important role in the possible breakthrough in rice self-sufficiency. In paddy agroecosystem as man-modified environment, rice is newly established every year by transplantation under diverse water regimes which affect a microclimate. Standing water benefits rice by regulating the microclimate, but it favors the multiplication of certain pets through the amelioration of the microclimate. Further, the introduction of high yielding varieties with the changing of cultural practices results in changing occurrence pattern of certain pests. In general, japonica type varieties lack genes resistant to most of the important pests and insect-borne virus diseases, whereas indica type possesses more genes conferring varietal resistance. Thus, this differences among indica type, form the background of different approaches to pest management. The changes in rice cultivation such as double cropping, growing high-yielding varieties requiring heavy fertilization, earlier transplanting, intensvie-spacing transplanting, and intensive pesticide use as a consequence of the adoption of improves rice production technology, have intensified the pest problems rather than reduced them. The cultivation of resistant varieties are highly effective to the pest, their long term stability is threathened because of the development of new biotypes which can detroy these varieties. So far, three biotypes of N. lugens are reported in Korea. Since each resistant variety is expected to maintain several years the sequential release of another new variety with a different gene at intervals is practised as a gene rotation program. Another approach, breeding multilines that have more than two genes for resistance in a variety are successfully demonstrated. The average annual rice losses during the last 15 years of 1977-’91 are 9.3% due to insect pests without chemical control undertaken, wehreas there is a average 2.4% despite farmers’insecticide application at the same period. In other words, the average annual losses are prvented by 6.9% when chemical control is properly employed. However, the continuous use of a same group of insecticides is followed by the development of pest resistance. Resistant development of C. suppressalis, L. striatellus and N. cincticeps is observed to organophosphorous insecticides by the mid-1960s, and to carbamates by the early 1970s in various parts of the country. Thus, it is apparent that a scheduled chemical control for rice production systems becomes uneconomical and that a reduction in energy input without impairing the rice yield, is necessarily improved through the implementation of integrated pest management systems. Nationwide pest forecasting system conducted by the government organization is a unique network of investigation for purpose of making pest control timely in terms of economic thresholds. A wise plant protection is expected to establish pest management systems in appropriate integration of resistant varieties, biological agents, cultural practices and other measures in harmony with minimizing use of chemical applications as a last weapon relying on economic thresholds.

• Research in Plant Disease
• /
• v.12 no.3
• /
• pp.158-163
• /
• 2006

Sclerotinia rot caused by Sclerotinia sclerotiorum frequently causes serious and unpredicable yield losses of the leaves of perilla growing under structured cultivation as vegetable in Korea. Temperature for mycelial growth ranged from 5 to $30^{\circ}C$ with optimum temperature d $20^{\circ}C$. Sclerotia were formed fewer at low temperature, but their dry weight was heavier than that at high temperature. The apothecia were formed from the sclerotia that buried up to 3 cm soil depth at $15^{\circ}C$ in moisture condition. The incidence of perilla Sclerotinia rot caused by S. sclerotiorum was observed throughout the growing season at greenhouse. The occurrence of this disease was especially severe from January to February of low temperature period. The average incidence rates of this disease was up to 15%. The significant occurrence of this disease was showed mainly in the continuous cropping field for more than five years. The incidence of this disease increased according to the increase of continuous cropping year. The incidence rates of this disease reached up to 20% in the continuous cropping field for ten years. Also it was firstly investigated the natural infection caused by S. sclerotiorum on weed plants, Gnaphalium affine and Mazus pumilus in farmer's field. The casual fungus showed pathogenicity on 11 weed plants species tested, and more severe pathogenicity on G. affine, Latuca indica and Ixeris dentata included in the family Compositae. This result suggests that effective crop rotation and weed eradication can be the method for organic control of perilla sclerotinia rot, and sudden outbreaks of this disease on perilla growing under structure after paddy rice call be explained by the presence of weed hosts.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.267-279
• /
• 1996

This study was investigated the changes during treatment and retention period in the Class III malocclusion patients and explored the correlationship between factors that showed relapse tendencies and pre-treatment skeletal pattern and the changes during treatment period. Numbers of total sample were 24 and their Hellman's dental age at the start of treatment was over III B and were retained at least over 1 year 6 months. The following conclusion were obtained by comparing the differences between treatment period and retention period, and after analysing the correlationship of factors that manifested relapse tendencies. 1. The angles formed by FH plane and occlusal plane, FH plane and mandibular plane, and mandibular incisor and mandibular plane changes showed rebound effect during retention period and among them occlusal plane angle and IMPA show reverse correlationship. 2. Upward displacement of the occlusal plane at the end of treatment has returning tendency, is proportional to the displacement during treatment period, but the angle between maxillary and mandibular 1st molar to its basal bone have been constantlsy maintained during the retention period. 3. Mandibular plane decrease during retention period and downward backward rotation during treatment period show correlationship.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.169-183
• /
• 2003

According to our recent investigation that the increase in the occlusal vertical dimension made the appendage muscle strength got higher, the occlusal appliances were made by increasing the occlusal vertical dimension "from the centric relation" position of the mandible. In this experiment, the authors tried to study the change in the appendage muscle strength due to increase in occlusal vertical dimension from intercuspal position(ICP) of mandible with the same subjects and manner as the former experiment. For this study, ten male athletes in a mean age of 23 year who were joined the former study were selected. All the subjects had a complete or almost complete set of natural teeth and reported no subjective symptoms of temporomandibular disorders. Upper and lower casts were mounted on the semi-adjustable articulator at the intercuspal position and a point was marked on the attached gingival area between the right canine and the right 1st. premolar in each upper and lower cast. From the points, the occlusal vertical dimension was increased by 2mm, 3.5mm and 5mm, and then each 10 maxillary type occlusal splint at each 3-increased position were fabricated with heat curing clear acrylic resin. Including the intercuspal position, the 3 kinds of occlusal splints were placed on the subjects individually, and then isokinetic muscle strength on 7 parts of the human appendage which are shoulder, knee, ankle, wrist, forearm, elbow and hip was measured with the CYBEX 6000 SYSTEM (Lumex, NewYork, USA). The results were as follows: The highest mean value in muscular strength was shown at the position of 2mm-increased vertical dimension. The muscle strength during internal/external rotation of shoulder and knee, plantarflexion of ankle, flexion of elbow, and flexion and extension of hip at the increased occlusal vertical dimension position were significantly higher than them at the intercuspal position (p<0.05). Only in view of the increase in the appendage muscle strength, regardless of the way of making the occlusal splints by elevating the occlusal vertical dimension from the centric relation position or intercuspal position, the occlusal splints had an effect on the increase of isokinetic muscle strength at the occlusal vertical dimension which increased within the proper range on the habitual arc of closure.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.4
• /
• pp.384-391
• /
• 1998

Nutrient removal during stem harvest was evaluated in a one-year rotation willow bioenergy plantation. For the stem nutrient content, the stem biomass and stem nutrient concentration were collected in the winter of 1987-1993 from the established willow plantation at Tully, New York, U.S.A. in 1987. Five willow clones and one hybrid poplar clone were planted. Half of the plots were fertilized annually with $336kg\;ha^{-1}$ N, $112kg\;ha^{-1}$ P, and $224kg\;ha^{-1}$ K. All trees were harvested annually. Mean annual nutrient removals of N, P, K, Ca, and Mg by annual stem harvesting over seven years were respectively 30-70, 4-10, 14-40, 19-59 and $3-5kg\;ha^{-1}$. Fertilized plants exported higher quantities of nutrients than non-fertilized ones. Nontheless, quantities of nutrients exported were well below the quantities supplied by fertilization suggesting that nutrients removal by stem harvesting is not likely to cause a decrease in soil fertility. However, in non-fertilized plots, the amount of nutrients removed could result in decrease of nutrient availability and soil fertility over the long-term. An evaluation of the clones revealed that clone SV1 is the most nutrient efficient.

• Journal of the Korean Arthroscopy Society
• /
• v.8 no.2
• /
• pp.98-102
• /
• 2004

Purpose: The purpose of this study was to make a report on the clinical prognosis of post traumatic lateral and posterolateral instability of the knee after LCL augmentation and popliteal tenodesis. Materials and Methods: The assessment was made among 21 cases who underwent augmentation of lateral collateral ligament(LCL) and popliteal tenodesis with allograft or artificial ligament (synthetic polyester, ABC ligament, Surgicraft, U.K.) at this Medical Center during the period from July 1996 to July 2003 and whose follow-up period was longer than one year. The authors recorded and analysed the physical findings (external rotation recurvatum test & posterolateral drawer test), stress roentgenograms(preoperative and postoperative) and Lysholm score. Results: The lateral and posterolateral instability of the knee were improved in 20 cases postoperatively, acccording to the clinical test and stress roentgenograms . Average Lysholm score was 52.5 preoperatively and 86.7 postoperatively .Conclusion: Our study found the surgery of lateral and posterolateral instability of the knee with augmentation of LCL and popliteal tenodesis using allograft or artiflcial ligament is simple technique. Taking these results into consideration, it seems to be one of effective methods of treatment.

• Publications of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.79-95
• /
• 2021

This study aims to develop a restoration model of an armillary sphere of Tongcheon-ui (Pan-celestial Armillary Sphere) by referring to the records of Damheonseo (Hong Dae-Yong Anthology) and the artifact of an armillary sphere in the Korean Christian Museum of Soongsil University. Between 1760 and 1762, Hong, Dae-Yong (1731-1783) built Tongcheon-ui, with Na, Kyung-Jeok (1690-1762) designing the basic structure and Ann, Cheo-In (1710-1787) completing the assembly. The model in this study is a spherical body with a diameter of 510 mm. Tongcheon-ui operates the armillary sphere by transmitting the rotational power from the lantern clock. The armillary sphere is constructed in the fashion of a two-layer sphere: the outer one is Yukhab-ui that is fixed; and the inner one, Samsin-ui, is rotated around the polar axis. In the equatorial ring possessed by Samsin-ui, an ecliptic ring and a lunar-path ring are successively fixed and are tilted by 23.5° and 28.5° over the equatorial ring, respectively. A solar miniature attached to a 365-toothed inner gear on the ecliptic ring reproduces the annual motion of the Sun. A lunar miniature installed on a 114-toothed inner gear of the lunar-path ring can also replay the moon's orbital motion and phase change. By the set of 'a ratchet gear, a shaft and a spur gear' installed in the solstice-colure double-ring, the inner gears in the ecliptic ring and lunar-path ring can be rotated in the opposite direction to the rotation of Samsin-ui and then the solar and lunar miniatures can simulate their revolution over the period of a year and a month, respectively. In order to indicate the change of the moon phases, 27 pins were arranged in a uniform circle around the lunar-path ring, and the 29-toothed wheel is fixed under the solar miniature. At the center of the armillary sphere, an earth plate representing a world map is fixed horizontally. Tongcheon-ui is the armillary sphere clock developed by Confucian scholars in the late Joseon Dynasty, and the technical level at which astronomical clocks could be produced at the time is of a high standard.

• Communications of Mathematical Education
• /
• v.33 no.3
• /
• pp.295-317
• /
• 2019

Angle concept is widely used in all mathematics curriculums and is a basic concept in geometric domain. Since angle have a multifaceted and affect subsequent learning, it is necessary for students to understand various angle concepts. In this study, Singapore, U.K., Australia, and U.S. are selected as comparable countries to examine the angle-related contents and learning process that appear in the curriculum as a whole, and then look at the perspectives and the size aspects of angle in detail and give implications to the Korean curriculum based on them. According to the analysis, the four countries except Korea, supplement angle, complement angle, angles on a straight line, angles at a point, and finding angle were explicitly covered in the curriculum. And most countries gradually covered angle-related contents over several years, compared to Korea which intensively studied in a particular school year. In common, definition of angle was described as static, measurement of angle was described as dynamic. But in Korean curriculum, dynamic views on angles are described later and less compared to other countries, and range of angle size was narrower than in other countries'. From this comparison, this study suggest to discuss how to place and develop various contents of characteristics of angle in curriculum, address the angle using both static and dynamic perspectives, and introduce the angle size as the amount of rotation to learn the reflex angle, $180^{\circ}$, $360^{\circ}$ angle.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.2
• /
• pp.173-182
• /
• 2019

Vertical facial growth triggers the rotation of mandible to move the chin point to the downward and backward direction, which showed remarkably effective result making the less prominent chin. Recently, the intraoral removable appliance utilizing class III elastic demonstrated the vertical growth trigger mechanism. The treatment change was very fast and wearing was quite easy, compared to extraoral appliances. The purpose of this study was to verify the duration of the treatment on class III malocclusion using intraoral removable appliances, which designed to accelerate vertical facial growth. 56 patients were selected with the complaint of the protruded mandible and class III malocclusion (overjet : -3 - 0 mm, overbite : 0 - 4 mm). Information like; age at start, duration of the treatment events, type of the treatment, overjet, overbite etc. was collected and calculated. The average age of the patients delivering the initial brace was $8.75{\pm}1.10year$. Most of the anterior crossbite was resolved within 6 months. The total treatment period was $21.79{\pm}10.73months$ with the additional procedures like the alignment of anterior teeth and torque control using additional removable and fixed orthodontic appliances. The correlation study showed that patient's cooperation (p = 0.000) and the use of fixed appliance (p = 0.032) were significantly influenced on treatment duration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.218-226
• /
• 2018

The purpose of this study was to examine the validity and reliability of the Korean version of the nursing students' perception of instructor caring (NSPIC) scale developed by Wade and Kasper for nursing students. We collected data from 219 nursing students in the 3rd to 4th year at three nursing colleges from June 4 to June 20, 2018. Data were analyzed using SPSS 21.0 and AMOS 21.0. An exploratory factor analysis with varimax rotation was performed, resulting in five factors (respectful sharing, confidence through caring, control versus flexibility, supportive learning climate, appreciation of life's meanings) with a total of 27 items. Confirmatory factor analysis supported good convergent and discriminant validities. In addition, the concurrent validity test confirmed that the K-NSPIC scale was a validity tool as the correlation of the clinical learning environment (CLE) scale appeared as r=.64 (p<.001). The Cronbach's alpha coefficient of the K-NSPIC was .88, and Cronbach's alpha coefficient for each of the five factors was .91, .86, .80, .76, and .85; internal consistency was confirmed. It is significant that the K-NSPIC proved applicable as a useful tool for assessing instructor caring. It is also expected that it will assist in the design of programs to improve the caring ability of instructors.