• 융복합기술연구소 논문집
• /
• 제6권2호
• /
• pp.35-40
• /
• 2016

Ignitor tip is a component of burner to start the burning process in power plant. This is used to ignite the coal to a constant operating state by fuel mixed with air and kerosene. This component is composed of three components so that air and kerosene are mixed in the proper ratio and injected uniformly. Because the parts with the designed shape are manufactured in the machining process, they have to be made of three parts. These parts are designed to have various functions in each part. The mixing part mixes the supplied air and kerosene through the six holes and sends it to the injecting part at the proper ratio. The inject part injects mixed fuel, which is led to have a constant rotational direction in the connecting part, to the burner. And the connecting plate that the mixed fuel could rotate and spray is assembled so that the flame can be injected uniformly. But this part causes problems that are worn by vibration and rotation because it is mechanically assembled between the mixing part and the inject part. In this study, 3D printing method is used to integrate a connecting plate and an inject part to solve this wear problem. The 3D printing method could make this integrated part because the process is carried out layer by layer using a metal powder material. The part manufactured by 3D printing process should perform the post process such as support removal and surface treatment. However, while performing the 3D printing process, the material properties of the metal powders are changed by the laser sintering process. This change in material properties makes the post process difficult. In consideration of these variables, we have studied the optimization of manufacturing process using 3D printing method.

• 대한영상의학회지
• /
• 제85권1호
• /
• pp.171-183
• /
• 2024

목적 본 연구의 목적은 수술 전 MRI의 다양한 간접 소견 중 어떤 소견이 외과적 치료가 필요한 견갑하건 파열을 예측하는 데 가장 주요한 것인지 조사하는 것이다. 대상과 방법 총 86명의 환자를 대상으로 수술 전 MRI 영상을 후향적으로 분석하였다. 견갑하건 파열의 직접평가, 이두박근 장두의 병리, 상완골두의 후방위, 상완골 회전, 견갑하근의 지방변성과 위축을 평가하였다. En-face 보기에서 부리돌기의 끝과 관절오목의 기저를 연결한 base-to-tip line (이하 BTL)을 이용한 육안 등급 및 두께 측정을 통해서 위축을 평가하였다. 결과 관절경 시술에서 31명(36%)의 환자가 Lafosse type III 또는 IV의 견갑하건 파열을 보여, 재건수술을 받았다. 이두박근 장두의 병리(p = 0.002), 상완골두의 후방위(p = 0.012), 견갑하근의 지방 변성(p < 0.001), BTL 등급(p = 0.003)은 견갑하건 파열과 유의한 상관관계가 있었다. 다변량 분석에서 상완골두의 후방위(p = 0.011, odds ratio [이하 OR] = 5.14)와 견갑하근의 지방변성(p = 0.046, OR = 2.81)은 견갑하건 파열의 독립적인 예측인자였다. 결론 상완골두의 후방위와 지방변성은 견갑하건 파열 진단에 도움이 될 수 있다. 이러한 결과를 판독하는 것은 최적의 수술 전략을 계획하는 데 기여할 수 있다.

• 동력기계공학회지
• /
• 제21권5호
• /
• pp.20-28
• /
• 2017

The steady-state, incompressible and three-dimensional numerical analysis was performed to investigate the flow fields around the seabed tiller used for soil improvement in coastal fisheries and the pulling force and buoyancy generated by tiller operation. The turbulence model used in this study is a realizable $k-{\varepsilon}$. As a results, at a stationary current or a current speed of 1.2 knots, where rotor rotates in a clockwise direction, a typical vortex pair appears near the tip of the rotor except for the edge, and the strength of the vortex pair increases with the number of revolutions of the rotor. The pulling force of the tiller rotating in the counterclockwise direction increases with the number of revolutions. Also, when the current flows at 1.2 knots and the rotor rotates clockwise, the pulling force of the tiller acts on the upstream side irrespective of the number of rotations of the rotor, so that no force is applied. The buoyancy of the tiller acts on the seawater surface if the flow direction inside the rotor is the same as the direction of rotation of the rotor, regardless of the current velocity, otherwise it acts on the seabed.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.114-123
• /
• 2000

The flow structure around a rotating axial-fan was experimentally investigated using a phase averaging velocity field measurement technique. The fan blades were divided into 4 different phases, for which 500 velocity fields were acquired for each phase angle with a 2-frame PTV system. Velocity field measurements were also carried out at two planes parallel to the axis of rotation, with offsets toward the radial direction of the fan. For accurate synchronization of the PTV system with the phase of the axial fan, two synchronization circuits were employed with a photo-detector attached to the rotating shaft. The phase averaged velocity fields show periodic variations with respect to the blade phase. The periodic formation of vortices at the blade tip is also observed in vorticity contour plots. Locations of local maximum turbulence intensities in the axial and radial directions are found to be located in an alternating pattern. These experimental results can be used to validate numerical calculations and to understand the flow characteristics of an axial fan.

• 대한의용생체공학회:의공학회지
• /
• 제25권3호
• /
• pp.207-215
• /
• 2004

본 연구에서는 유전 프로그램을 이용하여 6가지 형태의 금속 와이어 배치를 가진 전극을 생성하여 각 전극이 3차원 형태의 달팽이관에 미치는 기계적인 영향과 그 거동을 유한요소법을 이용하여 분석하였다. 그리고 전극이 삽입되는 달팽이관은 helico-spiral 근사방법에 의해 결정된 식을 이용하였으며, 고실계단(scala tympani)의 형태는 실제 고실계단 단면의 영상정보를 추출하여 얻어내었다. 해석결과 금속 와이어가 평행하게 배치될 경우 가장 큰 힘을 달팽이관 외벽에 전달하며, 삽입에도 가장 큰 힘이 필요한 것을 알 수 있었다. 그리고 달팽이관은 3차원 구조이므로 전극이 삽입되면서 삽입 전에 자극 사이트가 바라보도록 설정한 방향보다 조금 돌아감을 확인하였다. 이 연구의 결과로부터 전극의 강성이 외상(trauma)을 줄이는데 중요하다는 것을 알 수 있다.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.64-71
• /
• 2012

In this paper, a parallel manipulator is comprised of two sliders and four links. Sliders execute a linear reciprocating motion depending on parallel guides and make the connected links rotate. A couple of links connected by sliders do coupling motion. The end-effector called a link tip has orientation angle. Through the kinematics analysis of this manipulator, we found displacement, velocity and acceleration using direct and inverse kinematics. We used equations that derived from this analysis and determined five constraint conditions. These conditions had much to do with rotation states of links, the relative relation of link length and coupling motion state. To verify those, we suggest a new algorithm regarding constraint conditions of a manipulator. With the result which performed the algorithm, we found out that operation range of coupled links was limited by relative relation of link length and that manipulator was not able to carry out a series of link motion, in case of being the link vertical between two parallel guides.

• 한국정밀공학회지
• /
• 제31권8호
• /
• pp.665-670
• /
• 2014

In this paper, characteristics of a tidal current power generation system are analysis using power hardware-in-the-loop simulation (PHILS). A 10 kW motor generator set is connected to the real grid through a fabricated 10 kW back to back converter. A power control scheme is applied to the back to back converter. A 2 MW class tidal current turbine is modeled in real time digital simulator (RTDS). Generating voltage and current from the 10 kW PMSG is applied to a 2 MW class tidal current turbine in the RTDS using PHILS. The PHILS results depict the rotation speed, power coefficient, pitch angle, tip-speed ratio, and output power of tidal current turbine. The PHILS results in this paper can contribute to the increasing reliability and stability of the tidal current turbines connected to the grid using PHILS.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1060-1067
• /
• 2005

This paper attempts to derive and analyze the dynamic system of pinching a rigid object by means of two multi-degrees-of-freedom robot fingers with soft and deformable tips. It is shown firstly that a set of differential equation describing dynamics system of the manipulators and object together with geometric constraint of tight area-contacts is formulated by Lagrange's equation. It is shown secondly that the problems of controlling both the forces of pressing object and the rotation angle of the object under the geometric constraints are discussed. In this paper, the control method for dynamic stable grasping and enhancing dexterity in manipulating things is proposed. It is illustrated by computer simulation that the control system gives the performance improvement in the dynamic stable grasping of the dual fingers robot with soft tips.

• 대한치과의사협회지
• /
• 제54권7호
• /
• pp.563-574
• /
• 2016

A clear overlay appliance is a type of a removable appliance made from transparent thermoplastic plastic film that covers the entire dentition to move the teeth. It is one of the most favored orthodontic methods opted for by adult patients; this treatment is esthetic, does not cause discomfort and allows oral hygiene to be easily managed when compared to other conventional fixed treatment methods. However, the use of clear overlay appliances, such as invisalign or clear aligner, is associated with various clinical challenges. In particular, the appliances require longer treatment periods compared to fixed treatment, and due to the structural characteristics of the appliances, it is difficult to make proper posterior occlusion and certain type of tooth movement, including extrusion, rotation and tip. Thus, the clear overlay appliances are regarded as supplementary appliances by most orthodontists and have been used for simple orthodontic treatments, such as partial anterior alignments or orthodontic relapse cases. Owing to the remarkable advancement in the field of 3D digital technology over a period of 15 years, the accuracy and convenience of modern clear overlay appliances have continuously improved. Moreover, orthodontic outcomes have also been greatly improved by the introduction of new materials and successful application of various biomechanical methods from conventional orthodontic treatments in the design of clear overlay appliances. This study investigates the clinical limitations that should be considered during the application of clear overlay appliances and also examines the efforts and methods used to overcome these challenges.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.794-802
• /
• 2000

Since the examination of CTOD problem revealed that the discrepancy among CTOD's was a matte., of definition, the relationships among parameters based on different definitions have been studied Particularly, the relationship between $\sigma$BS R-curve based on BS 7448 and R-curve based on the recently introduced $\sigma$5 parameter was investigated in this research. For the comparison, compact tension specimens of used 1Cr-0.5Mo steel, heat treated 1Cr-0.5Mo steel to mimic the new one, A12024-T6, and A12024-T351 were prepared and tested. Consequently, the relationship between $\sigma$5 and $\sigma$BS R-curves for tested materials were established by shifting the rotational center which could determined by rotation factor and ligament size.