• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.199-202
• /
• 2005

We have studied the origin of coherent director rotation [CDR] as well as memory behavior in thiol-ene polymer stabilized ferroelectric liquid crystal [FLC]. The ene constituents are found to be always located at the inter-layer space and induce the coherent director rotation motion of liquid crystal molecule. On the other hand, the thiols are more intersticed between ferroelectric liquid crystal molecules at intra-layer as the thiol gets longer, and these intersticed thiols enhance the multistability and the resolution of memory state of FLCs.

• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.94-101
• /
• 1994

About vibration model of Six-degrees-of-freedom(DOF), in mass load, examined results for knowing dynamic interference and response variation is as follows; In case of putting mass load upon the object, experimented results on two-degrees-of-freedom of the translation-1 direction and the rotation-1 direction at open-loop-control system, about 0.19 arcsed in input of the translation-$0.1{\mu}m$ and $0.022{\mu}m$ on input of the rotation-0.5 arcsec, the justicse of motion equation is acknowledged as confirming the appearance of the interference-$0.022{\mu}m$. In establishing calculation of transformation matrix by using analogue circuit, as simulating results that used incomplete differentiation, interference is $1.7{\times}10^{-3}$ arcsec on input of the translation-$0.1{\mu}m$ and $1.4{\times}10^{4}{\mu}m$ on input of the rotation-0.5 arcsec in open-loop-control system. Also it is $4.2{\times}10^{-4}$ arcsec on input of the translation-$0.1{\mu}m$ and $5.6{\times}10^{-5}{\mu}m$ on input of the rotation-0.5 arcesc in closed-loop-control system. As closed-loop-control system is better than open-loop-control system, equivalent accordance is confirmed on original response. Finally, fundamental validity of this theory is acknowledged.

• Journal of Welding and Joining
• /
• 제24권1호
• /
• pp.43-49
• /
• 2006

This paper describes the friction surface modification which has been successfully developed with the friction stir welding recently There are several problems including just position control and backlash in conventional friction surface modification system. Therefore it has been developed the friction surface modification system which has been controlled precisely both position and force by driving hydraulic cylinder in this paper. The mechtrode rotation speed(N) and feeding speed(Vz), travel speed(Vx,y) are of critical importance for the width and thickness of the coating in friction surfacing process. But there is no theoretical method of determining interrelations between process parameters affect the coating width and thickness. As a result of DOE(design of experiment) with developed system, the coating thickness and width seemed to decrease according to increase the mechtrode rotation speed(N) and traveling speed(Vx,y), to decrease feeding speed(Vz) apparently. However as the result of regression analysis the main effect was only the mechtrode rotation speed in the coating thickness.

• 대한전자공학회논문지SP
• /
• 제39권5호
• /
• pp.522-534
• /
• 2002

본 논문에서는 자동물체 추적 시스템의 효율성을 높이기 위해 스테레오 영상을 이용한 물체 추적 시스템을 제안하였다. 기존의 물체 추적 시스템에서 사용한 방법들은 최적의 특성을 지니고 있지만, 많은 계산량을 요구하는 단점이 있다. 또한 단안에 의한 영상의 경우 물체의 다양한 변화에 대한 예측과 추적이 어렵다. 따라서 본 논문에서는 양안에 의해 얻어진 스테레오 영상에 변이(translation)와 회전(rotation)에서의 예측이 어려운 단점을 보완한 블록 정합 알고리즘을 적용함으로써 실시간 물체의 변화의 추적 능력을 지니면서도 그 계산량을 줄일 수 있는 추적 방법을 제시하였다. 실험을 통하여 회전(25개)과 전이(28개), 그리고 회전과 전이의 혼합(50개)된 영상에서 각각 88%, 89%, 88%의 인식률을 얻었으며, 평균 88.3%의 인식률을 얻음으로써 본 연구의 유용성을 입증하였다.

• 대한통합의학회지
• /
• 제5권4호
• /
• pp.41-48
• /
• 2017

Purpose : The purpose of this study was to verify the relationships among the knee adduction moment, hip rotation range, strength of hip rotators, and Foot Posture Index of healthy young adults. Method : Thirty-two healthy adults(24 male, 8 females) participated in this study. Subjects performed 5 walking trials to evaluate the knee adduction moments using a three-dimensional motion analysis system. Hip rotation ranges and hip rotator strengths were measured using a standard goniometer and a handheld dynamometer, respectively. The mean of three trials of clinical tests was used for data analysis. Results : The first peak knee adduction moment was significantly correlated with the hip rotation ranges and hip rotator strengths (P<.05). The second peak knee adduction moment was showed significant correlations with hip external rotation and rotation ratio. There were no correlations between Foot Posture Index and all knee adduction moments (P>.05). Conclusion : This study suggests that imbalances of the range of motion and strength of the internal and external rotation of the hip joint can affect knee adduction moments. The impact may exacerbate musculoskeletal disorders such as osteoarthritis of the knee. Therefore, further studies should be conducted to evaluate the effects of clinical interventions to correct these imbalances on the reduction of the knee adduction moments in patients with knee osteoarthritis.

• 한국지열·수열에너지학회논문집
• /
• 제11권3호
• /
• pp.13-19
• /
• 2015

This study was aimed at the heating tank with a screw-rotation device for improving the thermal efficiency of electric boiler. In the proposed system, analysis items were the heater rod surface temperature variation, reaching time for set temperature and thermal efficiency. The following conclusions are obtained from this experimental study. (1) When screw speed increases, the time reaching for set temperature tended to be shorter. (2) When the rotation speed becomes 300 rpm, the surface temperature difference between the right and left heater rod decreases by 49%, from $19.7^{\circ}C$ to $9.7^{\circ}C$ in average. (3) When the rotation speed is over 250 rpm, proposed heating tank structure appeared to be effective in terms of thermal efficiency. Thermal efficiency with the rotation speed 300 rpm is improved by 3.8% compared to the case of rotation speed 0 rpm.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2009년도 제17차 학술대회
• /
• pp.175-175
• /
• 2009

Despite its importance for the understanding of joint kinematics in vivo, there has been few studies about shoulder joints. The purpose of this study is to analyze the glenohumeral joint during internal and external rotation at 90 degrees of abduction using in vivo noninvasive motion analysis system. MRI was performed for the following seven positions from maximum internal rotation to maximum external rotation at intervals of 30 degrees. We used 3D-gradient echo sequencing (TR: 12 ms, TE: 5.8 ms, 0.8 mm-slice thickness). Our method is based on matching three-dimensional MR images by the similarity of the image intensity. We analyzed the in vivo three-dimensional motions of the glenohumeral and scapulothoracic joint during this motion. In scapla plane, the mean rotation angle of the glenohumeral join was 105.5 degrees ($SD{\pm}39.0^{\circ}$). The mean rotation angle of the scapulothracic joint was 27.5 degrees ($SD\;{\pm}\;7.7^{\circ}$). The contribution ratio is almost 3.8:1 of glenohumeral and scapulothracic joint respectively.

• 한국지진공학회논문집
• /
• 제18권2호
• /
• pp.95-103
• /
• 2014

The current AISC341-10 standard specifiesa value of 0.02 radian for the minimum rotation capacity of connections for the intermediate steel moment frame system. However, despite of the advances realized in the domains of performance evaluation method and analysis method, research onthe minimum rotation capacity of the intermediate steel moment frame systemsatisfying the seismic performance has not been conducted in detail. In this study, the intermediate moment frame systemisdesigned with respect to current standards and the seismic performance in accordance with the rotational capacity of connections is evaluated using the seismic performance evaluation method presented in FEMA-P695. The minimum rotation capacity of intermediate steel moment frames required to satisfy seismic performance as well as the major design values affecting the seismic performance of moment frame areestimated. To that goal, the design parameters are selected and various target frames are designed. The analysis models of the main nonlinear elements are also developed for evaluating seismic performance. The resultsshow that the 20-story structure doesnot meet the seismic performance even if it satisfies the rotation capacity of 0.02 radian.

• 정보처리학회논문지B
• /
• 제9B권4호
• /
• pp.509-516
• /
• 2002

본 논문에서는 그림, 글자, 표, 직선 등과 같은 다양한 정보를 포함하는 문서 영상 인식에 대한 효율적인 알고리즘을 제안한다. 이 시스템은 문서영상의 기울짐을 보정하기 위한 회전각검출 단계, 불필요한 배경영역을 제거하는 단계, 문서영상에 내재된 각 구성요소를 검출하는 분류 단계로 구성된다. 알고리즘은 문서의 기울어짐에 의해서 발생되는 오류를 최소화하기 위한 회전각 검출과정과 검출된 회전각을 기반으로 문서를 보정하는 전처리단계를 수행한다. 입력된 문서영상의 수평성분과 수직성분만을 이용하여 회전각을 검출하고, 문서의 구성요소 검출과정에서 불필요한 배경영역을 제거함으로써 계산시간을 최소화하였다. 그리고 영상에 내재된 그림영역, 글자영역, 표영역, 직선영역 둥의 다양한 구성요소를 분류한다. 제안한 문서 인식 시스템의 성능 평가를 위해서 다양한 문서영상에 제안한 방법을 적용하고 성공적인 결과를 보인다.

• 한국컴퓨터정보학회논문지
• /
• 제24권10호
• /
• pp.189-194
• /
• 2019

헬스케어 시스템에서 인간 목(경추)은 가장 중요한 기관 중 하나이고, 사람의 머리를 지탱하는 부위가 바로 경추이다. 요즘에는 스마트 폰으로 전화를 걸거나 모니터를 보기 위해 종종 목이 과로로 피곤한 경우가 많다. 이 논문에서 우리는 경추의 가쪽 돌림과 및 회전의 이상을 조사한다. 가쪽 돌림의 정상 각도는 $20^{\circ}{\sim}45^{\circ}$이고 정상적인 회전 각도는 $50^{\circ}{\sim}90^{\circ}$이다. 이 각도가 정상보다 낮아 통증이 느껴지면 경추에 문제가 있는 것이다. 또한 목 또는 경추의 가쪽 돌림 및 회전을 측정하는 방법과 이상을 치료하는 방법에 대해 알아본다. 그리고 경추의 가쪽 돌림 및 회전이상을 예방하는 방법도 살펴보도록 한다. 목이 비정상적인지 알아보기 위해 50 대 남성과 여성으로 100 명을 대상으로 실험을 수행하였다.