• PNF and Movement
• /
• 제7권1호
• /
• pp.25-32
• /
• 2009

Objective : The purpose of this study was conducted to find the change of shoulder flexion by degree of freedom between the Proprioceptive Neuromuscular Facilitation(PNF) pattern, the flexion- abduction- external rotation, and not PNF pattern, the flexion- exteral rotation(except abduction)movement. Method : PNF pattern applied on the unilateral upper extremity in all subjects were the flexion- abduction- external rotation, and not PNF pattern, and twenty-six normal subjects(13 male, 13 female) were tested by Cybex Norm Testing & Rehabilitation System. Results : PNF pattern showed significant increase of flexion than not PNF pattern, the flexion-exteral rotation(except abduction)movement, and also the female group was significantly increased than male group. Conclusion : The results suggested that the application of PNF pattern to the unilateral upper extremity had affected on the shoulder flexion by degree of freedom.

• 천문학회보
• /
• 제36권1호
• /
• pp.84.2-84.2
• /
• 2011

Astrophysical jets play important roles in many interesting astronomical phenomena, such as star formation, gamma-ray bursts, and active galactic nuclei. The jets are thought to be driven by rotating disks through magneto-centrifugal processes. However, quantitative understanding of the jet-driving mechanism has been difficult because examples showing rotation in both disk and jet are rare. One of the important quantities in the models of jet engine is the size of the jet-launching region. The bipolar jet of the NGC 1333 IRAS 4A2 protostar shows a lateral velocity gradient, which suggests that the SiO jet is rotating around its axis. The jet rotation is consistent with the rotation of the accretion disk. The disk-jet rotation kinematics suggests that the jet-launching region on the disk, or the outflow foot-ring, has a radius of about 2 AU, which supports the disk-wind models.

• 제어로봇시스템학회논문지
• /
• 제10권5호
• /
• pp.402-410
• /
• 2004

To obtain a good tracking performance in an optical disk drive servo system, it is essential to attenuate periodic disturbances caused by eccentric rotation of the disk. As an effective control scheme for enhancing disturbance attenuation performance, disturbance observers (DOBs) have been successfully applied to the track-following servo system of optical disk drives. In disk drive systems, the improvement of data transfer rate has been achieved mainly by the increase of disk rotational speed, which leads to the increase of the disturbance frequency. Conventional DOBs are no longer effective in disk drive systems with a high-speed rotation mechanism because the performance of conventional DOBs is severely degraded as the disk rotational frequency increases. This paper proposes a new DOB structure for effective rejection of the disturbance in optical disk drives with a very high rotation speed. Asymptotic disturbance rejection is achieved by adopting a band-pass filter in the DOB structure, which is tuned based on the information on the disturbance frequency. In addition, performance sensitivity of the proposed DOB to changes in disk rotational frequency is analyzed. The effectiveness of the proposed DOB is verified through simulations and experiments using a DVD-ROM drive.

• Smart Structures and Systems
• /
• 제20권5호
• /
• pp.563-572
• /
• 2017

The safety of structures is closely associated with the structural out-of-plane behavior. In particular, long and slender beam structures have been increasingly used in the design and construction. Therefore, an evaluation of the lateral and torsional behavior of a structure is important for the safety of the structure during construction as well as under service conditions. The current contact measurement method using displacement meters cannot measure independent movements directly and also requires caution when installing the displacement meters. Therefore, in this study, a vision-based system was used to measure the in-plane and out-of-plane displacements of a structure. The image processing algorithm was based on reference objects, including multiple targets in Lab color space. The captured targets were synchronized using a load indicator connected wirelessly to a data logger system in the server. A laboratory beam test was carried out to compare the displacements and rotation obtained from the proposed vision-based measurement system with those from the current measurement method using string potentiometers. The test results showed that the proposed vision-based measurement system could be applied successfully and easily to evaluating both the in-plane and out-of-plane movements of a beam including twisting rotation.

• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1089-1103
• /
• 2000

A Problem of relevant interest to some industries is that of obtaining optimum two-dimensional layout. To solve this provlem, one is given a number of rectangular sheets and an order for a specified number of each of certain types of two-dimensional regular and irregular shapes. The aim is to cut the the shapes out of the sheets in such a way as to minimize the amount of waste produced. A DCS (Distributed Control System) is an integrated system which applies the decentralization concept to a control system handling both sequential and analog control. A DCS performs many operations such as data gathering, data processing, data storing and monitoring the operatin conditions for the operator. IN this paper, we propose a genetic algorithm based on rotation parameters from which the best pattern of layout is found as well as a layout method for better performance time. A DCS for the plate cutting process system, which is performed by a virtual system, is also identified.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.52-61
• /
• 2001

The purpose of this paper is to study on the control of a self-activated cable spooling system for towed away handling winch using a hydraulic servo driving unit and a cable position measurement mechanism. To design a controller of the cable spooling system, it is carried out the analysis of the hydraulic servo system and derived the relationship of a parameters through the control theory. Also, it is derived from the control specfications using settling rotation angle and spooling safety ratio proposed to the analysis for the behavior of the system. The cable spooling system is tested and evaluated to validate the performance of the controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.250-250
• /
• 2000

The purpose of this paper is to study on the control of a self-activated cable spooling system for towed array handling winch using a hydraulic servo driving unit and a cable position measurement mechanism. To design a controller of the cable spooling system, it is carried out the analysis of the hydraulic servo system and derived the relationship of a parameters through the control theory. Also, it is derived from the control specifications using settling rotation angle and spooling safety ratio proposed to the analysis for the behavior of the system. The cable spooling system is tested and evaluated to validate the performance of the controller.

• 전기학회논문지
• /
• 제58권9호
• /
• pp.1750-1756
• /
• 2009

In this paper, 5 kWh class Superconductor Flywheel Energy Storage System (SFES) was constructed including motor/generator, superconductor magnetic bearing(SMB), composite rotor and electromagnetic damper(EMD) system. High speed rotation test was performed after levitating flywheel rotor only using EMD without SMB. the PD controller of EMD was designed. the control system is constructed using xPC which is real time digital control system. the results of high speed rotation test showed that proposed EMD system have sufficient damping in cylindrical mode and conical mode, and vibration of wheel was suppressed below 10 ${\mu}m$.

• International Journal of Fluid Machinery and Systems
• /
• 제6권3호
• /
• pp.160-169
• /
• 2013

Two-stage turbocharging is an important way to raise engine power density, to realize energy saving and emission reducing. At present, turbine matching of two-stage turbocharger is based on MAP of turbine. The matching method does not take the effect of turbines' interaction into consideration, assuming that flow at high pressure turbine outlet and low pressure turbine inlet is uniform. Actually, there is swirl flow at outlet of high pressure turbine, and the swirl flow will influence performance of low pressure turbine which influencing performance of engine further. Three-dimension models of turbines with two-stage turbocharger were built in this paper. Based on the turbine models, mechanism of swirl flow at high pressure turbine outlet influencing low pressure turbine performance was studied and a two-stage radial counter-rotation turbine system was raised. Mechanisms of the influence of counter-rotation turbine system acting on low-pressure turbine were studied using simulation method. The research result proved that in condition of small turbine flow rate corresponding to engine low-speed working condition, counter-rotation turbine system can effectively decrease the influence of swirl flow at high pressure turbine outlet imposing on low pressure turbine and increases efficiency of the low-pressure turbine, furthermore increases the low-speed performance of the engine.

• 한국컴퓨터정보학회논문지
• /
• 제16권8호
• /
• pp.49-56
• /
• 2011

최근들어 문화산업이 발전함에 따라 애니메이션 콘텐츠가 급속히 보급되고 있다. 본 논문에서는 사람의 얼굴 영상 대신 2차원의 애니메이션 캐릭터 영상을 효과적으로 분석하여 캐릭터의 얼굴을 추출한 후, 3차원적인 얼굴의 회전정보를 측정하고, 이를 3차원 얼굴 모델로 표현하는 방법을 제안한다. 제안된 시스템은 처음으로 입력되는 애니메이션 캐릭터 얼굴을 받아들여 얼굴과 얼굴의 주요 구성요소들의 주요 색상을 학습하고, 이를 주색상 모델로 생성한다. 그런 다음, 생성된 주색상 모델을 이용하여 새롭게 입력되는 애니메이션 캐릭터의 얼굴영역과 눈영역을 추출한 후, 추출된 영역으로부터 기준 좌표계와 대상 좌표계를 설정한다. 그리고 이 두 좌표계의 기하학적인 관계를 이용하여 애니메이션 캐릭터 얼굴이 3차원적으로 회전한 정보를 추출한다. 마지막으로, 추출된 3차원 회전정보를 시각적으로 용이하게 확인하기 위해서 3차원의 얼굴 모델에 회전정보를 반영하여 화면에 표현한다. 본 논문의 실험에서는 제안된 애니메이션 캐릭터 얼굴의 3차원 회전 정보 추출 방법의 성능을 평가하기 위한 실험결과를 보인다.