• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.4
• /
• pp.159-165
• /
• 2018

In electric agricultural machine a reduction gear is needed to convert the high speed rotation motion generated by DC motor to lower speed rotation motion used by the vehicle. The reduction gear consists of several spur gears. Spur gears are the most easily visualized gears that transmit motion between two parallel shafts and easy to produce. The modelling and simulation of spur gears in DC motor reduction gear is important to predict the actual motion behaviour. A pair of spur gear tooth in action is generally subjected to two types of cyclic stress: contact stress and bending stress. The stress may not attain their maximum values at the same point of contact fatigue. These types of failure can be minimized by analysis of the problem during the design stage and creating proper tooth surface profile with proper manufacturing methods. To improve its life expectation in this study modal and stress analysis of reduction gear is simulated using ANSYS workbench based on finite element method (FEM). The modal analysis was done to understand reduction gear deformation behaviour when vibration occurs. FEM static stress analysis is also simulated on reduction gear to simulate the gear teeth bending stress and contact stress behaviour.

• Structural Engineering and Mechanics
• /
• v.60 no.5
• /
• pp.903-921
• /
• 2016

To study the effect of looseness on mechanical behavior of dovetail mortise-tenon joints, five dovetail mortise-tenon joints, including one intact joint and four loose joints, were fabricated and tested under cycle lateral loadings, and non-linear finite element models using the software ABAQUS were also developed. The effects of looseness on stress distribution, rotational stiffness and bearing capacity of joints were studied based on the analysis of test and simulation results. The results indicate that the hysteretic loops are anti-Z-shaped and present typical characteristics of pinching and slippage, the envelop curves of joints are classified as following two stages: elastic and strengthening stage. The peak stress, rotational stiffness and bearing capacity of joints were reduced due to looseness. The moment-rotation theoretical model of intact joint was simplified in terms of the relation of construction dimensions for buildings, and the moment-rotation theoretical model considering the effect of looseness was proposed and validated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.1-7
• /
• 2010

Large quantity of bending deformation as well as irregular rotating torque fluctuation are the main struggles of the balance shaft module during a high speed rotation. Since two issues are much sensitive to the location of both supporting bearing and unbalance mass at a balance shaft, it is recommended to construct a design strategy on balance shaft at the early stage so as to save developing time and effort before approaches to the detailed design process. In this paper, an optimal design formulation is proposed to minimize the elastic strain energy due to bending as well as the kinematic energy of polar moment of inertia in rotation. Case studies of optimal design are conducted for different mass ratio as well as linear combination of objective function and its consequence reveals that global optimum of balance shaft model is existed over possible design conditions. Simulation shows that best locations of both supporting bearing and unbalance are globally 20% and 80%, respectively, over total length of a balance shaft.

• Journal of Korean Dental Science
• /
• v.14 no.2
• /
• pp.90-100
• /
• 2021

Purpose: The aim of this study was to evaluate the degree of achievement of anterior tooth movement using a thermoplastic clear aligner by superimposing pretreatment, setup, and post-treatment models and to analyze the factors that influence it. Materials and Methods: Forty patients who underwent clear aligner treatment at the Department of Orthodontics were included in the study. The pretreatment, setup, and post-treatment models were superimposed, and the achievement rates were evaluated. We analyzed the factors that caused changes in achievement rate on each condition. Result: The average achievement rate of total tooth movement was 57.65%. Mesiodistal and anteroposterior displacements were achieved better than vertical displacement and rotation. In each displacement, posterior, mesial, and extrusive movements were better achieved than the rotation. Spacing was better corrected than crowding, especially in the mesiodistal direction. Most of the tooth movements were achieved better when using 3-step thicknesses of aligners were used. Conclusion: The treatment results of clear aligners may differ depending on the type of tooth movement, age and other treatment conditions. Clinicians should consider unfavorable conditions based on the results of this study.

• Wind and Structures
• /
• v.35 no.2
• /
• pp.109-120
• /
• 2022

The force coefficients of rotating plates in the acceleration stage will vary with rotation rate from 0 to stable rotation rate w₀, which are important for quasi-steady theory of plate-like windborne debris to simulate the trajectory. In this paper, a wind tunnel experiment is carried out to study the effects of geometry and the Reynolds number on the variations of mean force coefficients of rotating plates. The rotational lift coefficients are sensitive to both geometry effect and Reynolds number effect, while the rotational drag and moment coefficients are only sensitive to geometry effect. In addition, new empirical formulas for the rotational lift coefficient and moment coefficients are proposed. Its accuracy is verified by comparing the predicted results with existing test data. Based on the experimental data of rotating plates, a new rotational force model for quasi-steady theory, which can be applied to a wider scope, is proposed to calculate the trajectory of plate-like windborne debris. The results show that the new model provides a better match with the tested trajectories than previous quasi-steady theories.

• Steel and Composite Structures
• /
• v.48 no.5
• /
• pp.547-564
• /
• 2023

This study investigates the effect of bolt preloading on the rotational stiffness of stainless steel end-plate connections. An experimental programme incorporating 11 full-scale joint specimens are carried out comparing the behaviours of fully pre-tensioned (PT) and snug-tightened (ST) flush/extended end-plate connections, made of austenitic or lean duplex stainless steels. It is observed from the tests that the presence of bolt preloading leads to a significant increase in the rotational stiffness. A parallel finite element analysis (FEA) validated against the test results demonstrates that the geometric imperfection of end-plate has a strong influence on the moment-rotation response of preloaded end-plate connections, which is crucial to explain the observed "two-stage" behaviour of these connections. Based on the data obtained from the tests and FE parametric study, the performance of the Eurocode 3 predictive model is evaluated, which exhibits a significant deviation in predicting the rotational stiffness of stainless steel end-plate connections. A modified bi-linear model, which incorporates three key properties, is therefore proposed to enable a better prediction. Finally, the effect of bolt preloading is demonstrated at the system (structure) level considering the serviceability of semi-continuous stainless steel beams with end-plate connections.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.24-24
• /
• 2018

Degraded plantation forests are increasing because of unfavorable forestry conditions prevailing in Japan, including falling timber prices, increasing operational costs, and aging and declining forestry workforce. To remedy this situation, appropriate management strategy is required. This study introduces the challenges of Odai Town, Mie Prefecture that employed a new management strategy by evaluating site suitability for conifer forests and that proposes a new forest management regime of planting deciduous trees in unsuitable sites. The site suitability for conifer forests was evaluated from two aspects: the natural site conditions and the relationship among site conditions, growth, and damage by Anaglyptus subfasciatus Pic. in Cryptomeria japonica D. Don and Chamaecyparis obtusa Sieb. Et Zucc. forests. By analyzing the relationship among site conditions, growth, and insect damage based on field data obtained in plantation forests, growth evaluation and insect damage evaluation maps were developed. Based on the natural forest investigation, natural site condition maps for C. japonica and C. obtusa were established. Furthermore, by integrating these evaluation maps with the forest road maps showing the accessibility to the forest, the forest management regime for the whole plantation area of Odai Town was established. The forest management regime map indicates the sites suitable for forestry: suitable for long-rotation, short-rotation, and potential sites for short-rotation. The sites unsuitable for forestry were considered to be more suitable for broadleaved forests. Clear-cutting was conducted in a small area and different seral stage saplings (approximately 20 deciduous tree species) suitable to the site conditions were planted in an area of $80-120m^2$ protected by deer-fences. This might establish a forest composed of many species with a multilayer vertical forest structure in a short period. The planted saplings were distributed neither randomly nor uniformly to reflect the natural distribution of trees in the forest. A challenge to develop new products using the deciduous trees has started, such as wood chips for preparing smoked food, essential oil, and deodorizer. As these challenges have just begun, their effects on enhancing sustainable resource management are still being monitored. Even with the challenges, this regime can be of high value as a management strategy to remedy the situation of expansion of degraded forests in Japan.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.2
• /
• pp.83-96
• /
• 2011

The open space of apartment complex has changed diversely according to construction periods which were divided into the introduction stage (the 1980s), the development stage (the 1990s), and the maturity stage (after 1999). This study set out to analyze the periodic changes of visual characteristics and preference with the open space of apartment complexes in Cheongju City. For analysis of visual characteristics and preference, nineteen adjectives that were determined to sufficiently express the feeling of the open space of apartment complex. The results are as follows. As for adjective image assessment by using descriptive statistics, favorable images were shown in complexes of maturity stage phase that were constructed after the liberalization of apartment sale in 1999. These results may be caused both by quantitative increase and diversification of materials in planting and landscaping furniture and by nature-friendly designing. The results of factor analysis by Varimax rotation method showed that common variance was 73.9%, which indicates higher explanation. The nineteen adjectives could be divided into three factors, 'pleasantness factor,' 'negative factor,' and 'irregular factor.' Visual preference was analysed by using Least significant Difference (LSD) by analysis of variance : complexes of maturity stage phase that were constructed according to the liberalization of apartment sale in 1999 were highest in assessment. The correlation between view preference and adjective images was analyzed by multiple regression analysis, and 'feeling like walking,' 'well-arranged,' 'beautiful,' 'friendly,' and 'clean' (in order) were adjective images that most affected the preference. As for the analysis of the correlation between visual preference and physical components of view, the preference increased as the rate of pavement and greens was higher, while it decreased as size of building was larger. Therefore, backgrounds of walking and greens had strong effects on the preference.

• Clinics in Shoulder and Elbow
• /
• v.22 no.4
• /
• pp.220-226
• /
• 2019

Background: This retrospective study was undertaken to evaluate mid-term clinical and radiological outcomes of lattisimus dorsi (LD) tendon transfer in patients with irreparable massive rotator cuff tears (MRCT). We hypothesize that LD tendon transfer would provide safe and satisfactory clinical outcomes at mid-term follow-up. Methods: From November 2008 to December 2016, 23 patients ($57.5{\pm}4.4years$; 20 male, 3 female) who underwent LD tendon transfer for massive tears, were enrolled. Inclusion criteria were irreparable MRCT. Exclusion criteria included full thickness subscapularis tear, rotator cuff arthropathy, anterosuperior rotator cuff tear, and osteoarthritis. Mean follow-up period was $4.7{\pm}4.0years$ (range, 2-12 years). Clinical assessment (American Shoulder and Elbow Surgeons [ASES], University of California, Los Angeles [UCLA], Simple Shoulder Test [SST]) and radiographic assessment (osteoarthritis [OA], acromiohumeral distance [AHI]) were evaluated. Results: ASES, UCLA and SST scores, and range of motion (ROM), except internal rotation, improved significantly at the last followup (p<0.05). Also, AHI was significantly improved at the last follow-up, from 6.6 mm to 8.2 mm (p=0.008). At the final follow-up, the radiologic stages of the glenohumeral osteoarthritis were determined as stage 1 in 9 patients, stage 2 in 10 patients, stage 3 in 2 patients, and stage 4 in 2 patients. Complications were observed in 21.7% cases: 3 re-tears and 2 infections were noted in our study. Conclusions: LD tendon transfer for irreparable MRCT provides satisfactory clinical outcomes at mid-term follow-up. Mild degenerative osteoarthritis (stage 1, 2) of the shoulder joint are common at the mid-term follow-up. Also, complications such as tear, infection should be considered.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.614-618
• /
• 2018

The changes in the mechanical properties according to the width of the tool shoulder, rotation speed and moving speed in friction stir welding (FSW) are evaluated using Al 6061-T6. The results indicated that the tensile strength value increases with increasing rotation speed. The higher the moving speed of the tool shoulder, the lower the tensile strength, regardless of the tool type. A higher tensile strength value was generally obtained with a tool shoulder diameter of 12mm (TSD12) than with 8mm. When the moving and rotation speeds exceed a limiting value, a stabilization stage is reached, in which (the tool shoulder diameter?) no longer affects the material properties. At a tool shoulder diameter of 8mm (TSD8), the material properties are decreased and the mixture of material in the welding area is incomplete in comparison with the tool type of TSD12. The tensile strength value is decreased at a rotation speed of 1500 rpm. As a result, a rotation speed higher than the threshold value is needed in order for and the transition temperature to be reached, which allows the complete mixing of the material in the welding area.