• Journal of Advanced Marine Engineering and Technology
• /
• 제38권8호
• /
• pp.974-980
• /
• 2014

Aluminum acts as sacrificial anode and corrosion protection with Al2O3 formation. If the same current on material for Al ships with steel ships supplies, the more hydrogen would be occurred, that result is bring about over-protection. For this reason, the damage by hydrogen embrittlement leads to the serious accident. In this study, we evaluate electrochemical behavior with rotation speed of 5083-H116 Al alloy material for Al ship in seawater. To examine the electrochemical characteristics with rotation speed and its effects on performance, experiments were conducted at four rotation speed. Results of experiments, the corrosion current density and damage were increased by applying the rotation speed compared to static state.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.522-527
• /
• 2002

The microstructure and mechanical properties of friction stir welded OFC plates with 2mm in thickness were examined with the changing welding parameters such as welding speed, rotation speed in this study. The sounding welding conditions was acquired at the optimum welding conditions of the 41mm/min to 61mm/min of welding speed at 1250 rpm of rotation speed. The microstructure of weld zone was divided into four parts such as the base metal region (EM), thermal mechanical affected zone (TMAZ), heat affected zone (HAZ), stir zone (SZ). The grain size in the SZ and the width of weld nugget were increased with increasing welding speed. The hardness profiles of the base metal were distributed about 80HV. The HAZ is a slightly softened region of about 60~75 HV relative to the base metal. The hardness profiles of the SZ were higher than that of base metal. The tensile strength was increased with increasing welding speed. In case increasing rotation speed, tensile strength was decreased. The maximum tensile strength was about 220:MPa which was 110% of joint efficience of that of base metal at 41mm/min of welding speed, 1250rpm of rotation speed.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.81-88
• /
• 2006

Present study is to know the relation with throwing speed according to the uniform torque by the shoulder joint, over 20 persons of professional baseball, and were measured the uniform torque by the shoulder joint accordance with throwing speed between (A-low speed) and (B-high speed) of each group. In the present study, three components were measured, and analyzed with having an approximated output value appearing by changing angular velocity, and in $30^{\circ}/sec$, the maximum strength of muscles was measured, and in$210^{\circ}/sec$, the points of endurance strength of muscles were measured and analyzed, and the following result could be obtained. 1. In muscles strength (peak torque)of inner rotation, and outer rotation for respect to each speed of shoulder joint, though there did not appear outstanding difference between A group and B group in the $30^{\circ}/sec$, it showed that group B has priority in a little. Also in outer rotation by shoulder joint, though there appeared the same difference between A group and B group, B group is tended to be prior to A group in a little. 2 In the view of muscles strength (peak torque)of inner rotation, and outer rotation for respect to each speed of shoulder joint, though there did not appear outstanding difference between A group and B group in the $30^{\circ}/sec$, it showed that group B has priority in a little. Also in outer rotation by shoulder joint, though there appeared the same difference between A group and B group, B group is tended to be prior to A group in a little. 3. In the view of muscles strength(peak torque)of inner rotation, and outer rotation for respect to each speed of shoulder joint, though there did not appear outstanding difference between A group and B group in the $30^{\circ}/sec$, it showed that B group has priority in a little. Also in outer rotation by shoulder joint, though there appeared the same difference between A group and B group, B group is tended to be prior to A group in a little. 4. In the view of peak torque for respect to the weight accordance with each velocity of shoulder joint, there did not appear outstanding difference between A group and B group. In outer rotation by the shoulder joint, there was not appeared clear difference between A group and B group. 5. In the concern of the peak torque for respect to the weight accordance with each velocity of shoulder joint, there did not appear outstanding difference between A group and B group in $30^{\circ}/sec$. In outer rotation by the shoulder joint, there was not appeared clear difference between A group and B group. 6. In the concern of the peak torque for respect to the weight accordance with each velocity of shoulder joint, there did not appear outstanding difference between A group and B group in $210^{\circ}/sec$. In outer rotation by the shoulder joint, there was not appeared clear difference between A group and B group. As conclusion, there did not appear a correlation of uniform torque by shoulder joint versus the speed throwing by a pitcher of professional base ball.

• 설비공학논문집
• /
• 제21권10호
• /
• pp.575-582
• /
• 2009

The optimum rotation speed of a desiccant rotor is studied theoretically based on a theoretical solution to the heat and mass transfer processes in the desiccant rotor. A simple correlation equation for the optimum rotation speed is derived to show the effects of various parameters including the thermo-physical properties, the geometric dimension, and the operating condition of the desiccant rotor. The theoretical result is compared with existing experimental data to validate the linearization and simplification included in the solution procedure. Based on the theoretical solution, the effects of major parameters on the optimum rotation speed are studied and the fundamental mechanism of the influences is investigated.

• 한국지열·수열에너지학회논문집
• /
• 제11권3호
• /
• pp.13-19
• /
• 2015

This study was aimed at the heating tank with a screw-rotation device for improving the thermal efficiency of electric boiler. In the proposed system, analysis items were the heater rod surface temperature variation, reaching time for set temperature and thermal efficiency. The following conclusions are obtained from this experimental study. (1) When screw speed increases, the time reaching for set temperature tended to be shorter. (2) When the rotation speed becomes 300 rpm, the surface temperature difference between the right and left heater rod decreases by 49%, from $19.7^{\circ}C$ to $9.7^{\circ}C$ in average. (3) When the rotation speed is over 250 rpm, proposed heating tank structure appeared to be effective in terms of thermal efficiency. Thermal efficiency with the rotation speed 300 rpm is improved by 3.8% compared to the case of rotation speed 0 rpm.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1862-1868
• /
• 2010

A corona motor, as one of a powerful cooling means of microelectronic devices, has been employed because of its very simple structure of no coils and no brushes. In this paper, the effect of polarity of applied voltage and the number of blade corona electrodes on the fundamental properties of rotation of the motor was investigated. The I-V and rotation characteristics of the blade corona electrode were significantly different from the different polarities of applied voltages and the blade corona electrode numbers, due to the different space charge effect resulted by the different migration mobility of the positive and negative ions generated near the blade corona electrode tip of the rotor of the motor. The rotation speed of the motor was influenced significantly by the polarity of corona discharge, the number of blades, and mass of rotor. At the same corona current, an effective rotation can be obtained with the positive corona caused by the lower ion mobility. On the other hand, the higher rotation speed can be obtained with the negative corona resulted from its higher corona current. The highest rotation speed and energy efficiency can be obtained with the rotor having 4 blades.

• 동력기계공학회지
• /
• 제15권2호
• /
• pp.61-68
• /
• 2011

This paper investigates the tensile properties of the friction stir welded joints of Al 7075-T651 aluminum plate according to the welding conditions. A 7075-T651 aluminum alloy plate with a thickness of 6.0 mm was used in this investigation. For the friction stir welding (FSW) process, a tool with shoulder diameter of 20 mm and probe diameter of 9 mm was used. The rotation speed and traverse speed conditions were changed in this study, the other welding conditions are constant. The welding direction was aligned with the material rolling direction, and dimension of the FSW plate were $250{\times}100{\times}6\;mm$. As far as this work is concerned, the optimal FSW conditions are determined as the rotation speed, 600 rpm and traverse speed 0.8 mm/sec or the rotation speed, 800 rpm and traverse speed 0.5 mm/sec.

• 전력전자학회논문지
• /
• 제23권1호
• /
• pp.16-23
• /
• 2018

PM synchronous motor may be rotated to an arbitrary direction and speed by outside wind under natural condition in cases where the fan is applied outside, such as in vehicle radiators and outdoor air-conditioners. Sensorless controls that cannot detect rotor position requires additional sensorless control algorithm because a rotor is rotated by an external load. In this study, the sensorless control of a PM synchronous motor under naturally rotating condition is proposed. The natural rotation conditions are classified as forward high-speed rotation, reverse high-speed rotation, and low-speed rotation. Experiment results verify the performance of the sensorless control, including the rotor speed and position detection at natural rotation mode and switch to the closed-loop sensorless control.

• Journal of Welding and Joining
• /
• 제18권5호
• /
• pp.49-54
• /
• 2000

High speed rotating arc process, forming a flat bead surface with shallow penetration depth, can be applied to the automatic seam tracking, because the amplitude of current waveform increases at high rotation speed. Two high speed arc rotation mechanisms have been developed in Japan and Germany b rotating the electrode nozzle using an external motor, which are used prevalently for narrow gap and conventional seam welding. In this study, a new rotation mechanism was developed by using a hallow shaft motor designed to be installed in the electrode nozzle. By rotating the welding arc, the amplitude of current waveform increases remarkably since the self-regulation of arc is not fully performed. Experiments show that the arc sensor with high-speed rotation arc has improved its responsiveness and sensitivity.

• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.532-539
• /
• 2007

The 7075-T651 Al alloy was welded by friction stir welding. Microstructure, macro behaviors and fracture type in the nugget, thermo-mechanically affected zone(TMAZ) and heat affected zone(HAZ) of the welded part were compared to base metal. The microsturctures of nugget zone were compared with tool rotation speeds and various tool transition speed. When the rotation speeds were decreased and transition speeds were increased, the hardness of nugget zone were decreased. Also, the optimal microstructure was observed at the low rotation speed of 800rpm and the high transition speed of 124mm/min. The transgranular dimple and quasi-cleavage at fractured part of nugget zone were investigated.