• Journal of the HCI Society of Korea
• /
• v.5 no.2
• /
• pp.1-6
• /
• 2010

In this research, we designed the head mouse system for disabled and gamers, a mouse controller which can be controlled by head movements and eye blinks only, and compared its performance with other regular mouse controller systems. The head mouse was moved by a gyro-sensor, which can measure an angular rotation of a head movement, and the eye blink was used as a clicking event of the mouse system. Accumulated errors caused by integral, which was a problem that previous head mouse system had, were removed periodically, and treated as dead zones in the non-linear relative point graph, and direct mouse point control was possible using its moving distance and acceleration calculation. We used the active light sources to minimize the influence of the ambient light changes, so that the head mouse was not affected by the change in external light source. In a comparison between the head mouse and the gazing tracking mouse (Quick Glance), the above method resulted about 21% higher score on the clicking event experiment called "20 clicks", about 25% higher on the dasher experiment, and about 37% higher on on-screen keyboard test respectively, which concludes that the proposed head mouse has better performance than the standard mouse system.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.123-135
• /
• 1990

It would be of importance to determine the neutral Tone by a resultant axis of relation on relation to the mandible in understanding the biomechanics of the mandibular movement. In this study, the neutral zone at the habitual opening and closing mandibular movements is the shape of the paths described by a minimum moving point occured as an average center of the determined instantaneous centers of rotation. Twenty, aged $23{\sim}25$, male dental students without Temporomandibular disorders and with normal occlusion clinically were selected for the study. The habitual opening and closing mandibular movements were recorded by the Gnathorecouder and analyzed by the computer program of a planer rigid body model and the determined method of a minimum moving point. The results obtained from this study were as follows. 1. The minimum moving points were placed in the body of the mandible except two subjects. 2. The mean of maximum displacements of a minimum moving point was $0.62{\pm}0.08cm$ on X-axis and $0.73{\pm}0.16cm$ on y-axis. 3. The mean of maximum displacements of a minimum moving point was $3.39{\pm}0.62cm$ 4. The position and shape of the neutral zone were determined by the position, displacements, and moving distances of a minimum moving point.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.667-673
• /
• 1996

The prevalence of class III malocclusion is approximately 5$\sim$9%, and about one fourth of this malocclusion is due to underdeveloped maxilla. Maxillary protraction appliance is an orthopedic device which promote the growth of a deficient maxilla by applying extraoral force to actively growing patients. The object of using maxillary protraction appliance is to guide a normal growth of maxilla and mandible and improve the occlusal relationship and also improve the facial profile. The author treated three patients whom were diagnosed as a class III malocclusion due to deficient maxilla using maxillary protraction appliance and the followings are the conclusions : 1. In these cases, anterior crossbite was corrected by anterior movement of maxilla and downward backward rotation of mandible and simultaneously, anterior facial height was increased. 2. The amount of dental change compare to skeletal change was greater as the patients got older. 3. When 500gm of force to each side was applied, the treatment period has been decreased. 4. As a result of applying the force between maxillary first primary molar and canine, there was a small degree of changes in palatal plane. So, it can be concluded that the maxillary protraction appliance is effective in treating growing patients with a deficient maxilla.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.12 no.4
• /
• pp.40-46
• /
• 2016

In order to improve air quality of indoor environment, studies of the underfloor air distribution (UFAD) system for application in buildings are actively in progress based on temperature and air flow distribution. However, although the age of air is the major evaluation parameter, there has been very little study on this parameter for the UFAD system. In this study, we investigated the age of air to reach the air diffuser, which is installed at the bottom of the interior by the UFAD system. Computational fluid dynamics simulations showed no regular pattern to the maximum value of the age of air in accordance with air flow rate and the velocity at air diffuser. These factors can be deduced from air movement by considering that air emitted from air conditioners was rotated according to the bottom shape of the floor, and then, the age of air in the rotation center was increased. The average age of air of internal interior was reduced considerably as the flow velocity at the underfloor air diffuser was increased from 0.5 m/s to 1.0 m/s However, the age of air was not substantially affected with change in the air volume. Moreover, when the flow velocity at the underfloor air diffuser was higher than 1.0 m/s, the age of air showed no significant difference with change in air volume or height of measurement. These results imply that indoor air quality is more substantially influenced by flow velocity than air volume, and the appropriate flow velocity is 1 m/s or more.

• The Journal of the Korea Contents Association
• /
• v.6 no.2
• /
• pp.44-50
• /
• 2006

This study has proposed a method of content-based image retrieval using object region in order to overcome disadvantages of existing color histogram methods. The existing color histogram methods have a weak point of reducing accuracy, because these have both a quantization error and an absence of spatial information. In order to overcome this problem, we convert a color information to a HSV space, quantize hue factor being pure color information, and calculate histogram. And then we use hue for retrieval feature that is robust in brightness, movement, and rotation. To solve the problem of the absence of spatial information, we select object region in terms of color feature and region correlation. And we use both the edge and the DC in the selected region for retrieving. As a result of experiment with 1,000 natural color images, the proposed method shows better precision and recall than the existing methods.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.15-21
• /
• 2019

The worm reducer is capable of quadrature power transmission when the shafts are disposed at right angles to each other. Since a large reduction ratio can be obtained of up to approximately 1/100 and a sliding movement is performed during operation compared with other gears, the noise and vibration are small, and there is the advantage that reverse rotation can be prevented. On the other hand, severe wear and damage are displayed on the gear and worm tooth surface, and many defects, such as intense heat generation of the reducer, occur. In the reducer case, the four-piece casing method was selected to solve the problems of heat generation, transmission efficiency, and assemblability. In this paper, we analyzed the problems of the worm and worm wheel (the core parts of a 5-Ton worm reducer) and casing through these methods and researched how to solve them.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.11
• /
• pp.911-918
• /
• 2016

A conical roll-shaping process was proposed for fabrication of a metallic spiral blade applied to a small-scale wind turbine system. A spiral blade has continuously different curvatures, with a range of 100 to 350 mm radius. To fabricate this complex shape, we developed a conical roll-shaping process having two main conical rollers for feeding a blank sheet, and two cylindrical side rollers for control of local bending. For clear understanding of the process parameters, numerical analyses were conducted using a commercial code, Pam-Stamp. This study optimized the effects of process parameters, such as gap and angle between the main rollers and side rollers, and also the movement of side rollers. In order to increase the forming efficiency, a central rotation point was also calculated by the analytical approach. This developed rolling process can thus be utilized in a sheet metal forming process for obtaining spirally curved sheet metal shapes.

• Science of Emotion and Sensibility
• /
• v.5 no.4
• /
• pp.67-75
• /
• 2002

The purpose of this study is to assess the ability of balance control in virtual moving surround stimulation using head mount display (HMD) device and force platform in patients with brain injury. Fifteen patients with stroke (mean age 54.47 yrs) and fifteen healthy normal persons participated. COP parameters were obtained total path distance, frequency of anterior-posterior and medial-lateral component by FFT analysis, weight-spectrum analysis in the two different conditions; (1) during comfortable standing with opened or closed eyes, (2) during virtual moving surround stimulation delivered using HMD with four different moving pattern. Moving patterns consisted of close-far, superior-inferior lilting (pitch) , right-left tilting (roll) and horizontal rotation (yaw) movement. In all parameters, the test-retest reliability was high. Also, the construct validity of virtual moving surround stimulation was excellent (p＜0.05). A posturographic balance assessment system equiped with virtual moving surround stimulation using HMD is considered clinically useful in evaluation of balance control in patients with brain injury.

• Journal of Internet Computing and Services
• /
• v.10 no.5
• /
• pp.117-125
• /
• 2009

Early in 21st century, researches about intelligent service robot that provide various services for a human out of the industrial robot only has simple pattern repetition. It concentrates in the research regarding the URC(Ubiquitous Robotic Companion) robot which connects the network in the intelligent service. This paper proposes the robot system based on network to guide a way. The robot has made by lego brick and used ultrasonic sensor, rotation sensor and RFID tag to recognize external environment. Also, it includes a PDA to process the data between robot and server. The network server transmits information to robot controller by bluetooth and it controls the course movement and evasion of the robot. In this research, the robot system based on network to guide a way is easy to expand service and is able to process a data in real time due to data processing in the server as a part of intelligent robot. And it can reduce the cost to build a robot thank to use cheaper sensor equipment.

• Korean Journal of Acupuncture
• /
• v.26 no.3
• /
• pp.27-42
• /
• 2009

Objectives : The vestibular system detects head movement and serve to regulate and maintain the equilibrium and orientation of the body. It is known that the vestibular imbalance leads to vestibular symptoms such as nausea, vomiting, vertigo and postural disturbance. The objectives of the present study were to examine a modification of the dynamic activities of medial vestibular nucleus (MVN) neurons following electroacupuncture (EA) of GB43 (Hyepgye). Methods : In Sprague-Dawley rats weighing $250{\sim}300g$, dynamic responses induced by sinusoidal whole body rotation about vertical axis at 0.2 Hz were observed in MVN of rats during EA of GB43 (Hyepgye) with 0.2 ms, 40 Hz and $600{\pm}200{\mu}A$. Also, expression of cFos protein was observed 2 hours after EA for 30 mins. Results : In dynamic response of vestibular neuron, the excitatory or inhibitory responses of gain were predominant in the ipsilateral MVN neurons during EA but not predominant in the contralateral MVN. Most neurons showing decreased gain were classified to inhibitory responses of spontaneous firing discharge during EA and ones showing increased gain were classified to excitatory response of spontaneous firing discharge during EA. Also, EA of the left GB43 (Hyepgye) for 30 mins produced the expression of cFos protein in MVN, inferior olive (IO) and solitary tract nuclei (SOL). Spatial expressions of cFos protein were predominant in the contralateral MVN, ipsilateral IO and bilateral SOL. Conclusion : These results suggest that the excitability of MVN neurons was influenced by EA of GB43 (Hyepgye) and EA may be related to the convergence on MVN.