• 종양간호연구
• /
• 제4권1호
• /
• pp.62-70
• /
• 2004

The purpose of this study was to use as a basic data to develop suitable nursing intervention program and decide an appropriate intervention time after assessing shoulder range of motion in postmastectomy from 2 weeks to 3 month. 147 patients are chosen as study subject among patients who were in recovery of 2weeks, 1month, 2months and 3 months after surgical operation which is modified radical mastectomy. Data were collected at oncology medicine local and general surgery local in Seoul National University Hospital from May, 2003 to October, 2003. The range of motion of the shoulder(flexion, extension, abduction, internal rotation, external rotation) were examined. Analysis of data that shoulder range of motion average and standard deviation, percentage of the unaffected side and affected side compare with normal shoulder range of motion. Paired t-test was adopted to analyze the difference between affected side and unaffected side. Conclusion from this study is as following, 1. The most serious problem was external rotation (0.56%) and internal rotation is the next (19.9%) in 5 kinds of shoulder range of motion in 2 weeks after surgical operation 2. There was no difference in internal rotation after post operation 3 months but there were differences and shown to recover more than 90% in flexion and abduction. Also shoulder function incresed in flextion less than 80% and more than 80% in external rotation. As this study finding was shown that shoulder range of motion did not get back perfectly except of internal rotation and extension in point of 3 months after breast cancer surgical operation. External rotation was specially shown the lowest result so it is needed to exercise for improving their physical functioning recovery in postmastectomy patients. And it is suggested to study for helping to postmastectomy patients' physical and psycosocial functions with the early rehabilitation program which is based on these results.

• 한국지능시스템학회논문지
• /
• 제20권3호
• /
• pp.428-433
• /
• 2010

u와 v를 두 인접수열 (consecutive sequence)이라고 했을 때 이때 "block rotation"이란 uv를 vu로 바꾸는 연산을 의미한다. 기존에 3개의 block rotation 알고리즘 즉 "BlockRotation", "Juggling" 그리고 "Reversal 알고리즘"이 소개되었는데 최근 우리는 하나의 새로운, QuickRotation 이라고 명명한 block rotation 알고리즘을 소개했다. 우리는 이 논문에서 QuickRotation 알고리즘을 이들 기존의 알고리즘들과 비교해 보이고자 한다. 벤치마킹 뿐만 아니라 복잡도 분석을 통한 비교를 통해 QuickRotation 알고리즘의 우수성을 증명해 보이고자 한다.

• Clinics in Shoulder and Elbow
• /
• 제9권1호
• /
• pp.60-67
• /
• 2006

Purpose: The purpose of this study was to compare the method of using coraco-clavicular (C-C) sling with modified Phemister operation by postoperative clinical results, radiologic analysis and complications. Materials and Methods: 33 patients of acromioclavicular joint dislocation were included in this study. Thirteen patients were treated with simple C-C sling method and twenty patients were treated with modified Phemister operation. The assesment of clinical and radiological evaluation were performed and the final results were examined by using the Weitzman's classification. Results: In the final result of C-C sling method group, forward elevation $161^{\circ}$, external rotation $70^{\circ}$, internal rotation T8 level, Visual Analogue Scale (VAS) 83.3 points were checked. In modified Phemister operation group, forward elevation $155^{\circ}$, external rotation $67^{\circ}$, internal rotation T6 level, VAS 83.8 points were checked. In coracoclavicular distance of C-C sling method group, pre-operation 12.82 mm and last follow up 8.37 mm were checked. In modified Phemister operation group, pre-operation 12.8 mm and last follow up 7.7 mm were checked. In functional evaluation by the Weitzman criteria, C-C sling group had excellent 8, good 1, fair 1 and modified Phemister group had excellent 13, good 4, fair 3. Conclusion: C-C sling method would be the better than the Modified Phemister operation because of short operation time and smaller skin incision.

• 한국통신학회논문지
• /
• 제37권5A호
• /
• pp.290-297
• /
• 2012

본 논문에서는 의료용 In-Body Wireless Body Area Network (WBAN) 시스템을 위한 Offset Phase Rotation Shift Keying (OPRSK) 및 Phase Silence Rotation Shift Keying (PSRSK) 변조 방식을 제안한다. 현재 IEEE에서는 인체통신을 위한 WBAN 시스템을 802.15. Task Group (TG) 6로 지정하고 이에 관한 표준화를 진행하고 있다. 최근에는 WBAN 시스템의 전력 효율 향상을 위해 Phase Silence Shift Keying (PSSK), Phase Silence Position Keying (PSPK), 및 Phase Rotation Shift Keying (PRSK) 등의 변조 방식들이 제안되었으나, 기존의 방식들은 비선형 증폭기에 의한 왜곡에 취약한 단점이 있다. 따라서 본 논문에서는 심볼 구간의 전력 분산 및 성상도의 위상 옵셋을 통해 최대 위상 전이 범위를 제한함으로써 비선형 왜곡에 강인한 OPRSK 및 PSRSK 방식을 제안하며, 다양한 성능 분석을 통해 제안된 방식의 우수성을 입증하였다.

• 한국통신학회논문지
• /
• 제29권5C호
• /
• pp.692-699
• /
• 2004

본 논문에서는 변경된 Given회전을 이용한 QR 분해와 이를 기반으로 하는 RLS 알고리듬의 구현에 대하여 연구하였다. Givens 회전은 CORDIC(Coordinate Rotation Digital Computer) 연산을 반복 수행하여 구한다. QR 분해의 계산 시간을 줄이기 위해 1회의 Givens 회전에 필요한 CORDIC 연산의 반복 회수를 제한하였으며 보정계수를 계산할 때의 제곱근 계산을 없애기 위해 2회전 방법을 사용하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권6호
• /
• pp.628-634
• /
• 2008

The purpose of this study is to examine reproducibility of operation plan and 3-dimentional jaw movement patterns by comparing jaw position of STO with post-operative jaw position. Twenty patients with class III dental and skeletal malocclusion who were treated with Le-Fort I osteotomy and B-SSRO were reviewed. Lateral cephalometric radiographs were taken within two weeks before operation and two days after operation. Cephalometric radiographs were compared and analyzed with orthognathic computer program '$V-Ceph^{TM}$'. Post-operative maxillary advancement was insufficient compared to maxillary advancement through STO. Post-operative setback movement was over compared to mandibular setback movement through STO. But statistically this is not significant. Maxillary vertical location is insignificant on the whole. Especially post-operative maxillary clockwise rotation is significant compared to maxillary rotation through STO. Post-operative maxillary clockwise rotation tendency is generally observed in all patients. So surgeons and staffs must consider this tendency when operation plan is established ans operation is being performed. Using intra or extra oral marking points, face bow, and bite plate will make exact surgery possible.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.174-181
• /
• 2012

The spindle unit is a core part in high precision machine tool. Rotation accuracy of spindle unit is needed for high dignity cutting and improving the performance of machine tool. However, there are many factors to effect to rotational error motion(rotation accuracy). This study studied how rotational error motion is variation when unbalance amount is variation. Rotation accuracy of initial spindle unit is decided depending on parts and assembly such as bearing. When it is rotation, vibration and noise is appeared depending on volume of unbalance amount, so it works to decrease unbalance amount. The purpose of the study tests that unbalance amount how much effects to initial rotation condition. The result of the study shows that accuracy of parts and assembly is highly necessary to reach high rotation accuracy and unbalance amount hardly effects to initial rotation accuracy. However, it shorten spindle's life because vibration and noise is increasing by increasing unbalance amount and we can expect situation that rotation accuracy is falling by long time operation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.711-714
• /
• 2005

We propose floating point arithmetic units for geometry operation of mobile 3D graphic processor. The proposed arithmetic units conform to the single precision format of IEEE standard 754-1985 that is a standard of floating point arithmetic. The rounding algorithm applies the nearest toward zero form. The proposed adder/subtraction unit and multiplier have one clock cycle latency, and the inversion unit has three clock cycle latency. We estimate the required numbers of arithmetic operation for Viewing transformation. The first stage of geometry operation is composed with translation, rotation and scaling operation. The translation operation requires three addition and the rotation operation needs three addition and six multiplication. The scaling operation requires three multiplication. The viewing transformation is performed in 15 clock cycles. If the adder and the multiplier have their own in/out ports, the viewing transformation can be done in 9 clock cycles. The error margin of proposed arithmetic units is smaller than $10^{-5}$ that is the request in the OpenGL standard. The proposed arithmetic units carry out operations in 100MHz clock frequency.

• 소성∙가공
• /
• 제12권8호
• /
• pp.730-737
• /
• 2003

Extensive studies have been conducted for reducing the residual stresses and birefringence in injection-molded optical disk substrate Flow-induced and thermally-induced stresses and birefringence have been found as two main sources during injection molding process. However, high speed rotation also induces extra stresses and birefringence in real operation of disk drives. In the present paper rotation-induced in-plane birefringence has been measured and presented for CD and DVD substrates at different radial position. About 10 - 15 nm of extra retardation in one pass has been measured up to 4,800 rpm. The distribution of extra rotation-induced birefringence will be valuable data for designing an optimal optical disk substrate. Finally, experimental results were compared with the extra stresses calculated from simple formulation.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.81-86
• /
• 1998

It is difficult to know how to restrict the amount of water supply in the drought season, because there is no objective standard rules. The purpose of the study is to present management rules to overcome the drought in the irrigation reservoir by forecasting the water level and restricting water supply according to the operation rule curve and the pattern of rotation-irrigation system. From the operation rule curve drawn up by analyzing the observed water level of reservoir, the water supply rules and rotation-irrigation patterns using WWW and GIS are suggested.