• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.47-54
• /
• 2005

A dangerous event occurred at the field industry and mechanical system. At developed by SUNGGOKNANOTECH corp. a R-L clutches of a small and high capacity serves safety device from a variety environment of mechanical system, it permits transmission of driving torque from input to output shaft in both directions of rotation, but restrains any feedback torque of the driven load from rotating the output shaft in either direction. This study was carried out to demonstrate through finite element method and durability estimation for safety of the R-L clutches without sliding during the engagement process. As results, we organized about endurance test method when applied rated torque.

• Journal of information and communication convergence engineering
• /
• 제21권4호
• /
• pp.337-345
• /
• 2023

In this study, we formulated a method that evaluates Taekwondo Poomsae performance using a series of choreographed training movements. Despite recent achievements in 3D human pose estimation (HPE) performance, the analysis of human actions remains challenging. In particular, Taekwondo Poomsae action analysis is challenging owing to the absence of time synchronization data and necessity to compare postures, rather than directly relying on joint locations owing to differences in human shapes. To address these challenges, we first decomposed human joint representation into joint rotation (posture) and limb length (body shape), then synchronized a comparison between test and reference pose sequences using DTW (dynamic time warping), and finally compared pose angles for each joint. Experimental results demonstrate that our method successfully synchronizes test action sequences with the reference sequence and reflects a considerable gap in performance between practitioners and professionals. Thus, our method can detect incorrect poses and help practitioners improve accuracy, balance, and speed of movement.

• 제어로봇시스템학회논문지
• /
• 제20권12호
• /
• pp.1284-1289
• /
• 2014

In this Paper, outdoor position estimation system was implemented using GPS (Global Positioning System) and INS (Inertial Navigation System). GPS position information has lots of errors by interference from obstacles and weather, the surrounding environment. To reduce these errors, multiple GPS system is used. Also, the Discrete Wavelet Transforms was applied to INS data for compensation of its error. In this paper, position estimation of the mobile robot in the straight line is conducted by EKF (Extended Kalman Filter). However, curve running position estimation is less accurate than straight line due to phase change in rotation. The curve is recognized through the rate of change in heading angle and the position estimation precision of the initial curve was improved by UPF (Unscented Particle Filter). In the case of UPF, if the number of particle is so many that big memory gets size is needed and processing speed becomes late. So, it only used the position estimation in the initial curve. Thereafter, the position of mobile robot in curve is estimated through switching from UPF to EKF again. Through the experiments, we verify the superiority of the system and make a conclusion.

• 정보보호학회논문지
• /
• 제24권4호
• /
• pp.607-616
• /
• 2014

현재 영상감시 시스템에서 얼굴 인식을 통한 사람의 신원 확인은 정면 얼굴이 아닌 관계로 매우 어려운 기술에 속한다. 일반적인 사람들의 얼굴 영상과 입력된 얼굴 영상을 비교하여 유사도를 파악하고 신원을 확인 하는 기술은 각도의 차이에 따라 정확도의 오차가 심해진다. 이런 문제를 해결하기 위해 본 논문에서는 POSIT을 사용하여 얼굴 포즈 측정을 하고, 추정된 각도를 이용하여 3D 얼굴 영상을 제작 후 매칭 하여 일반적인 정면 영상끼리의 매칭이 아닌 rotated face를 이용한 매칭을 해보기로 한다. 얼굴을 매칭 하는 데는 상용화된 얼굴인식 알고리즘을 사용하였다. 얼굴 포즈 추정은 $10^{\circ}$이내의 오차를 보였고, 얼굴인증 성능은 약 95% 정도임을 확인하였다.

• Computers and Concrete
• /
• 제33권5호
• /
• pp.535-544
• /
• 2024

In the rapidly advancing landscape of computer vision (CV) technology, there is a burgeoning interest in its integration with the construction industry. Camera calibration is the process of deriving intrinsic and extrinsic parameters that affect when the coordinates of the 3D real world are projected onto the 2D plane, where the intrinsic parameters are internal factors of the camera, and extrinsic parameters are external factors such as the position and rotation of the camera. Camera pose estimation or extrinsic calibration, which estimates extrinsic parameters, is essential information for CV application at construction since it can be used for indoor navigation of construction robots and field monitoring by restoring depth information. Traditionally, camera pose estimation methods for cameras relied on target objects such as markers or patterns. However, these methods, which are marker- or pattern-based, are often time-consuming due to the requirement of installing a target object for estimation. As a solution to this challenge, this study introduces a novel framework that facilitates camera pose estimation using standardized materials found commonly in construction sites, such as concrete forms. The proposed framework obtains 3D real-world coordinates by referring to construction materials with certain specifications, extracts the 2D coordinates of the corresponding image plane through keypoint detection, and derives the camera's coordinate through the perspective-n-point (PnP) method which derives the extrinsic parameters by matching 3D and 2D coordinate pairs. This framework presents a substantial advancement as it streamlines the extrinsic calibration process, thereby potentially enhancing the efficiency of CV technology application and data collection at construction sites. This approach holds promise for expediting and optimizing various construction-related tasks by automating and simplifying the calibration procedure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.614-619
• /
• 2004

The line-of-sight (LOS) stabilization system is a precision electro-mechanical gimbals assembly for rejecting vibration to isolate the load from its environment and point toward the target in a desired direction. This paper describes the design of gimbals system to reject the disturbance and to improve stabilization. To generate movement commands for the actuators in the stabilization system, the control system uses a sensor of angular rotation. The controller is a DSP with transducer and actuator interfaces. Unknown parameters of the gimbals are estimated using the signal compression method. The cross-correlation coefficient between the impulse response from the assumed model and the one from model of the gimbals is used to obtain the better estimation. And SMCPE (sliding mode control with perturbation estimation) is used to control the gimbals. SMCPE provides robustness of the control against the modeling deficiencies and unknown disturbances. In order to compare the performance of SMCPE with the classical SMC, a sample test result is presented.

• 한국통신학회논문지
• /
• 제41권11호
• /
• pp.1406-1409
• /
• 2016

본 논문에서는 송수신단 간 변조기법 및 채널 상태 값이 약속되지 않은 완벽한 블라인드 통신 상황에서 송신측의 변조방식을 알아내기 위해 성좌도 회전 및 확률밀도함수(probability density function : pdf)를 이용한 새로운 자율 변조 구분(Automatic modulation classification : AMC)기법과 경험적 신호 그룹화 알고리즘을 통해 채널 상태 값을 추정하는 방법을 제안한다. 평균제곱근 편차(Root mean square error : RMSE) 및 심볼 오류율(Symbol error rate : SER) 등의 모의실험을 통해 제안된 기법과 기존의 다른 기법간의 채널 상태와 변조 추정 능력을 비교 평가한다.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권3호
• /
• pp.109-118
• /
• 2016

The present paper proposes a method that can estimate a roll rate of spinning vehicles utilizing GPS receivers. The proposed method analyzes a relation between received signal and correlation value and utilizes a phenomenon that received signal power that changes according to a signal incident direction affects a correlation value. That is, a roll-rate estimation method using zero crossing detection method for correlation value, which has sinusoidal periodicity according to rotations of vehicles, is proposed. A correlation value in real environments experiences a jitter so that the proposed method includes a pre-processing filter and detection threshold setting way is also considered to reduce the effect of received signal power. In order to verify the operation of the proposed method and analyze the performance, a signal generator and software-defined receiver (SDR) are designed. The signal generator generates intermediate frequency (IF) signal by taking the rotation of vehicles, antenna gain, and signal power into consideration, and a correlation value is acquired by taking the generated IF signals into consideration. Using the generated correlation value, the operation of the proposed roll rate estimation method is verified and the performance is analyzed.

• 정보저장시스템학회논문집
• /
• 제9권1호
• /
• pp.5-9
• /
• 2013

Page-oriented holographic data storage (HDS) is very sensitive to the disturbances. However, vibration effect by disc imbalance can be ignored because data pages are recorded and retrieved with stop-go rotation. Therefore, just estimating de-track due to eccentricity of disc is enough to construct stable track servo system. In this paper, propose the spacing of track servo patterns optimization method using Least Mean Square (LMS) estimation algorithm. Through the patterns spacing optimization, storage density maximize can be achieved.

• 정보처리학회논문지B
• /
• 제13B권5호
• /
• pp.499-506
• /
• 2006

본 논문에서는 실시간 증강현실 시스템에서의 가상 객체 삽입을 위한 빠르고 안정된 카메라 자세 추정 방법을 제안한다. 단일 프레임에서 마커의 특징점 추출을 통해 카메라의 회전행렬과 이동벡터를 추정한다. 카메라 자세 추정을 위해 정사영 투영모델에서의 분해기법을 사용한다. 정사영 투영모델에서의 분해기법은 객체의 모든 특징점의 깊이좌표가 동일하다고 가정하기 때문에 깊이좌표의 기준이 되는 참조점의 설정과 점의 분포에 따라 카메라 자세 계산의 정확도가 달라진다. 본 논문에서는 실제 환경에서 일반적으로 잘 동작하고 융통성 있는 참조점 설정 방법과 이상점 제거 방법을 제안한다. 제안된 카메라 자세추정 방법에 기반하여 탐색된 마커 위치에 가상객체를 삽입하기 위한 비디오 증강 시스템을 구현하였다. 실 환경에서의 다양한 비디오에 대한 실험 결과, 제안된 카메라 자세 추정 기법은 기존의 자세추정 기법만큼 빠르고 기존의 방법보다 안정적이고 다양한 증강현실 시스템 응용에 적용될 수 있음을 보여주었다.