• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.81-84
• /
• 2000

Rotating machine is used extensively and plays important roles in the industrial field. Therefore when rotating machine get out of order, it is necessary to know reasons then deal with the troubles immediately. So many studies far diagnosis of rotating machine are being done. However by this time most of study has an interest in gaining a high recognition But without considering error $rate^{(1)(2)(3)}$ , it is not desirable enough to apply h the actual application system. If the manager of system receives the result misjudging the condition of rotating machine and takes measures, we would lose heavily. So in order to play the creditable diagnosis, we must consider error rate. T h ~ t is. it must be able to reject the result of misjudgment. This study uses nearest neighbor classifier for diagnosis of rotating $machine^{(4)(8)}$ And the Smith's rejection $method^{(1)}$ used to recognize handwritten charter is done. Consequently creditable diagnosis of rotating machine is proposed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.5
• /
• pp.425-430
• /
• 2015

This paper is a study to improve the classification efficiency of rotating objects by using deep neural networks to which a deep learning algorithm was applied. For the classification experiment of rotating objects, COIL-20 is used as data and total 3 types of classifiers are compared and analyzed. 3 types of classifiers used in the study include PCA classifier to derive a feature value while reducing the dimension of data by using Principal Component Analysis and classify by using euclidean distance, MLP classifier of the way of reducing the error energy by using error back-propagation algorithm and finally, deep learning applied DBN classifier of the way of increasing the probability of observing learning data through pre-training and reducing the error energy through fine-tuning. In order to identify the structure-specific error rate of the deep neural networks, the experiment is carried out while changing the number of hidden layers and number of hidden neurons. The classifier using DBN showed the lowest error rate. Its structure of deep neural networks with 2 hidden layers showed a high recognition rate by moving parameters to a location helpful for recognition.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.4
• /
• pp.520-530
• /
• 1996

In this study, the artificial defects in rotary compressor are classified using pattern recognition of acoustic emission signal. For this purpose the computer program is developed. The neural network classifier is compared with the statistical classifier such as the linear discriminant function classifier and empirical Bayesian classifier. It is concluded that the former is better. It is possible to acquire the recognition rate of above 99% by neural network classifier.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2423-2428
• /
• 2008

A turbo classifier having a rotating rotor of two stage classification region has been developed to have a cut size of 1 micro meter. Particle number concentrations were counted using Aerosol Particle Sizer (APS, TSI co., USA) at inlet and outlet of the classifier. Partial classification efficiency was obtained at various rotation speeds, total flow rates, and feed rates of powders, and classification characteristic depending on design parameters was discussed. Classification performance was enhanced as rotation speed of rotor increased and total flow rate decreased.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.52-58
• /
• 2002

The purpose of condition monitoring and fault diagnosis is to detect faults occurring in machinery in order to improve the level of safety in plants and reduce operational and maintenance costs. The recognition performance is important not only to gain a high recognition rate bur a1so to minimize the diagnosis failures error rate by using off effective rejection module. We examined the problem of performance evaluation for the rejection scheme considering the accuracy of individual c1asses in order to increase the recognition performance. We use the Smith's method among the previous studies related to rejection method. Nearest neighbor classifier is used for classifying the machine conditions from the vibration signals. The experiment results for the performance evaluation of rejection show the modified optimum rejection method is superior to others.

• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.331-337
• /
• 2000

The necessity of diagnosis of the rotating machinery which is widely used in the industry is increasing. Many research has been conducted to manipulate field vibration signal data for diagnosing the fault of designated machinery. As the pattern recognition tool of that signal, neural network which use usually back-propagation algorithm was used in the diagnosis of rotating machinery. In this paper, self-organizing feature map(SOFM) which is unsupervised learning algorithm is used in the abnormal defect diagnosis of rotating machinery and then learning vector quantization(LVQ) which is supervised learning algorithm is used to improve the quality of the classifier decision regions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.537-543
• /
• 2003

Condition monitoring and fault diagnosis of machines are gaining importance in the industry because of the need to increase reliability and to decrease possible loss of production due to machine breakdown. By comparing the vibration signals of a machine running in normal and faulty conditions, detection of faults like mass unbalance, shaft misalignment and bearing defects is possible. This paper presents a novel approach for applying the fault diagnosis of rotating machinery. To detect multiple faults in rotating machinery, a feature selection method and support vector machine (SVM) based multi-class classifier are constructed and used in the faults diagnosis. The results in experiments prove that fault types can be diagnosed by the above method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.950-955
• /
• 2003

This paper introduces an enhanced condition monitoring and diagnosis system recently developed for rotating machinery. In the system, the data aquisition/monitoring signal processing, machine condition classifier, case-based reasoning and demonstration modules are effectively integrated with user-friendliness so that machine operators can easily monitor and diagnose the status of rotating machinery in operation. Some of the new features include the directional spectrum, case-based reasoning and neural network techniques. And the demonstrator modules for fault diagnosis of a Bear driving system and for basic understanding of the rotor dynamics are provided to help the potential users better understand the system.

• 유체기계공업학회:학술대회논문집
• /
• 1999.12a
• /
• pp.317-323
• /
• 1999

The necessity of diagnosis of the rotating machinery which is widely used in the industry is increasing. Many research has been conducted to manipulate field vibration signal data for diagnosing the fault of designated machinery. As the pattern recognition tool of that signal, neural network which use usually back-propagation algorithm was used in the diagnosis of rotating machinery. In this paper, self-organizing feature map(SOFM) which is unsupervised learning algorithm is used in the abnormal vibration diagnosis of rotating machinery and then learning vector quantization(LVQ) which is supervised teaming algorithm is used to improve the quality of the classifier decision regions.

• Particle and aerosol research
• /
• v.4 no.2
• /
• pp.37-50
• /
• 2008

Concerns on centrifugal classifiers, of which have cut sizes are below few micrometers, have been increased and it is prospected to be used in extensive industries, such as manufacturing the fine minerals, cosmetics, advanced electric materials, and life science. This paper reviews the recent progress of research and development on the centrifugal classifiers. General categorization of classifiers for feeds was assessed and separation mechanism of the classifiers was followed. History of centrifugal classifiers was explored and some points to be improved were briefly indicated. Fundamental theory of the classification by centrifugal classifiers was pearly studied, and advanced and further understandings on factors affecting the separation or grading efficiency are described. Factors determining the classification precision and efficiency of centrifugal classifiers, such as geometry, rotational speed and inclined angle of rotating vanes, feed and air flow rates, and rotor dimensions are reviewed.