• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.523-536
• /
• 1991

This dissertation analyzes the running mechanism of flexible and thin tape above rotating head through the numerical simulation and the experiment. The scope of analysis is confined to the phenomena of two dimensional elasto hydrodynamic lubrication between the protruded bump on a rotating cylinder and the running tape. This model is based on the elastic deformation equation of plate and shell and Reynolds equation. Finite difference method is employed as a numerical technique to calculate (1) the distribution of pressure between the running tape and rotating bump and (2) the vertical deformation of elastic thin tape over he rotating bump under hydrodynamic pressure. In numerical analyses, the effects of bump size on flying characteristics of the tape were evaluated and examined considering the influence of tension and stiffness of tape.

• 소음진동
• /
• 제10권5호
• /
• pp.865-872
• /
• 2000

This paper presents the modeling, theoretical formulation, and stability analysis for a combined system of a spinning disc and a head that contacts the disc. In the analytic model, head interference is considered by a rotating mass-spring-damper system together with a frictional follower force on the damped annular discs. The multiple scale method is utilized to perform the stability system that shows the existence of instability associated with parametric resonances. Using the formulated system , instability regions of optical recording disc are investigated with variation of mass, stiffness and friction force of a head, respectively. The simulation results show that the stiffness of a head is the most sensitive parameter on the instability of the disc.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1075-1082
• /
• 2004

This research demonstrates the shock response analysis of a head disk assembly subjected to a half-sine shock pulse in the axial direction. In case of disk analysis, the numerical method presented by Barasch and Chen is used. Galerkin method is used with mode shape by numerical method. Head-suspension system is modeled as the cantilever in order to get simulation results. Simulation results of HDA are calculated by Runge-Kutta method. Finally, shock responses of head and disk are analyzed according to the change of the rotating speed of the disk.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.533-538
• /
• 2002

This research demonstrates the transient response of a head disk assembly subjected to a half-sine shock pulse in the axial direction. In case of disk analysis, the numerical method presented by Barasch and Chen is used. Galerkin method is used with mode shape by numerical method. head-suspension system is modeled by the cantilever in order to get simulation results. Simulation results about total system of HDA are calculated by Runge-Kutta method.

• 대한기계학회논문집B
• /
• 제24권4호
• /
• pp.570-577
• /
• 2000

Local heat transfer characteristics inside a hard disk driver(HDD) are investigated in this study. The investigation is considered between disks co-rotating in a cylindrical enclosure. The gap spacing, rotating speed and head-arm positions are mainly considered to understand the flow and heat transfer in the co-rotating disks. The naphthalene sublimation technique is used to determine local heat/mass transfer coefficients on the rotating disk. Flow patterns inside the co-rotating disks are investigated using a Laser Doppler Anemometer (LDA) and also analyzed numerically. The results show that the heat transfer coefficients on the disk changed little with the gap spacing between disks. Heat transfer rates in the outer region increases with increasing rotating Renolds number, but the values normalized by that on a free rotating disk give a similar pattern for the tested cases. The head-arm inserted between the rotating disks destroys the inner region resulting in enhancement of heat transfer in that region.

• 대한기계학회논문집B
• /
• 제24권8호
• /
• pp.1029-1037
• /
• 2000

The present study investigates the local heat/mass transfer characteristics on a rotating disk which is the top disk covered with a shroud in HDD. The naphthalene sublimation technique is employed to determine the local heat/mass transfer coefficients on the rotating disk. Flow field measurements using Laser Doppler Anemometry (LDA) and numerical calculations are performed to analyze the flow patterns induced by the disk rotation. HDD has been developed for compactness and speedy data access, thus the rotating velocity of the disk is increased and the height of a hub is decreased. The experiments are conducted for the various hub heights of 5, 10 and 15 mm, for the rotating Reynolds numbers of $5.5{\times}10^4$ to $1.1{\times}10^5$ and for the effects of the presence of a read/write head arm. The results show that the heat transfer on the rotating disk is enhanced considerably for the decrease of the hub height and for the increase of the rotating Reynolds number. The head arm inserted in the cavity decreases the heat transfer despite the enhancement of tangential RMS velocity because of the deficit of the momentum in the flow field.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1609-1614
• /
• 2000

This paper presents the modeling, theoretical formulation, and stability analysis for a combined system of a spinning disk and a head that contacts the disk. In the analytical model, head interface is considered by a rotating mass-spring-damper system together with a frictional follower force on the damped annular disks. The method of multiple scales is utilized to perform the stability analysis that shows the existence of instability associated with parametric resonances. This instability can be effectively stabilized by increasing the damping ratio of a disk.

• 한국습지학회지
• /
• 제15권1호
• /
• pp.51-58
• /
• 2013

본 연구에서는 준설용 커터헤드의 형태에 따른 준설효율 특성을 분석하기 위하여 개방형 및 폐쇄형으로 나누어 수리실험을 수행하였다. 준설효율에 관한 실험을 수행하기 위하여 $4.9m(L){\times}2.2m(W){\times}1.5m(H)$ 크기의 대형수조를 제작한 후 준설 운영에 필요한 여러 장치를 제작하였다. 준설효율 실험에서는 커터헤드의 준설깊이, 회전속도, 흡입속도 등에 관한 운영조건을 달리하여 실험을 수행하였다. 준설효율에 관한 실험 결과를 살펴보면 개방형의 경우보다 폐쇄형의 경우에 상당히 높은 준설효율을 유지하였다. 동일한 커터헤드의 형태에서는 커터헤드의 회전속도가 준설효율 결과에 가장 큰 영향을 미쳤으며, 보다 높은 준설효율을 위해서는 적정수준의 흡입속도가 필요한 것으로 나타났다.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.107-119
• /
• 1991

본 연구에서는 테이프의 미소한 수직 변형에 대한 실험을 수행하여 이에 대한 계측 이론 및 계측방법을 정립한다. 회전 헤드와 주행 테이프를 구동할 수 있는 실 험 장치를 개발하고 주행 테이프의 변형을 정밀 계측할 수 있는 측정 시스템을 구성한 다. 이러한 측정 시스템을 이용하여 고속이면서 미소한 주행 테이프의 변형에 대해 비접촉적인 방법으로 3차원 계측을 실시한다. 헤드의 형상 및 크기가 다른 모델들을 설계 및 가공을 통해 제작하여 주행 테이프의 부상 특성을 평가한다. 주행 테이프의 부상 특성에 관한 수치 해석 결과에 대하여 실제와의 부합 여부를 검토할 수 있도록 실험을 수행한다. 본 연구에서 구성한 비접촉 측정 시스템으로 계측한 테이프의 3차 원 변형에 대한 실험 결과와 수치 해석 결과를 비교 검토한다.

• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1192-1200
• /
• 1999

The present study investigates flow characteristics in a cavity with one rotating disk and co-rotating disks for application to HDD. The experiments are conducted for rotating Reynolds numbers of $5.5{\times}104$ to $1.10{\times}105$ and for gap ratios of 0.059 to 0.175 in a single rotating and 0.047 to 0.094 in co-rotating disk. Time-resolved velocity components and turbulence intensity on the rotating disks are obtained by using LDA measurements. Detailed Knowledge of the flow characteristics is essential to analyze flow vibration and heat transfer and to design head-arm assembly and hub height in HDD. The results indicate that the velocity field in HDD is changed largely by the rotating Reynolds numbers and hub height of the disk.