• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권4호
• /
• pp.268-272
• /
• 2002

This paper presents a novel microfabrication technology of 3D microstructures with inclined/rotated UV lithography using negative photoresist, SU-8. In some cases, reflected UV as well as incident UV is used to form microstructures. Various 3D microstructures are simply fabricated such as embedded channels, bridges, V-grooves, truncated cones, and so on.

• 한국디지털건축인테리어학회논문집
• /
• 제11권4호
• /
• pp.39-46
• /
• 2011

This Study is about the Axis used for creating forms of interior spaces in representative works of Peter Eisenman architecture. The plans, elevations, photos of interior spaces of his architecture were collected and analysed. In conclusion, the methods using axises were classified in the axises crossing right angle and the rotating axises crossing right angle. The rotating axis were divided into one-angle rotating and multi-angle rotating. The axises were rotated on the plan or rotated on the elevation. The axises crossing right angle were used for dividing, assembling, transforming and composing different proportions of rectangles in interior spaces. The rotating axises crossing right angle were used for creating divers forms such as triangle, quadrilateral, and polygon. The one-angle rotating emphasizes directions of axises in interior spaces. The multi-angle rotating emphasizes decentered directions in interior spaces. The parts created while crossing axises three-dimensionally were opened or filled. The axises were used dynamically and three-dimensionally for diversity of forms in interior spaces of Peter Eisenman architecture.

• 대한전자공학회논문지TC
• /
• 제49권8호
• /
• pp.65-69
• /
• 2012

회전 변환된 정사각 QAM 신호 성좌를 클리핑하여 좌표 축 인터리브 된 직교 설계(Coordinate Interleaved Orthogonal Design; CIOD)에 적용되는 낮은 최대 전력 대비 평균 전력 비(Peak-to-Average-Power Ratio; PAPR)을 가지는 신호 성좌를 설계한다. 본 논문에서 제안하는 신호 성좌는 기존의 회전 변환된 정사각 QAM 신호 성좌에 비해 매우 낮은 PAPR을 가질 뿐 아니라, 기존의 신호 성좌와 거의 동일한 비트 오율(Bit Error Rate; BER) 성능을 가진다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.837-838
• /
• 2008

This paper presents a new signature and Fourier descriptor based algorithm for recognizing a rotated object and its rotation angle. Fourier descriptor is used to represent an object using its frequence parameters which are not influenced by rotation. once the object is recognized, the point with the largest auto-correlation coefficient which can be calculated from signature of the object is used to find angle of the object. The outstanding performance of the proposed algorithm has been tested with the test images where more than 10 2D objects arbitrarily located on a table.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.987-988
• /
• 2008

In this paper, we propose a rotation invariant face detection method using Haar-like feature variation. Previous approaches using rectangular features can be calculated very fast. But rectangular features is weak in rotated face. Rotated Haar-like features can get high accuracy, but the performance is slow because it can't use the integral image. Our method vary Haar-like features keeping rectangular. this method makes the performance a bit slow, but gives better accuracy.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.900-915
• /
• 1988

본 연구에서는 주유동 방향이 알려진 3차원 난류유동에서 열선유속계의 경사 형 프로브와 Ⅰ형 프로브를 회전시키므로써 3방향 속도성분과 6방향 레이놀즈 응력을 비교적 간편하고 정확히 측정하는 방법을 고안하여 사용하였다.

• Coupled systems mechanics
• /
• 제8권6호
• /
• pp.537-553
• /
• 2019

In this paper we present geometrically exact Kirchhoff's initially curved planar beam model. The theoretical formulation of the proposed model is based upon Reissner's geometrically exact beam formulation presented in classical works as a starting point, but with imposed Kirchhoff's constraint in the rotated strain measure. Such constraint imposes that shear deformation becomes negligible, and as a result, curvature depends on the second derivative of displacements. The constitutive law is plasticity with linear hardening, defined separately for axial and bending response. We construct discrete approximation by using Hermite's polynomials, for both position vector and displacements, and present the finite element arrays and details of numerical implementation. Several numerical examples are presented in order to illustrate an excellent performance of the proposed beam model.

• 한국강구조학회 논문집
• /
• 제8권3호통권28호
• /
• pp.35-45
• /
• 1996

The purpose of this paper is to investigate experimentally the strength and deformation of T-joints to improve the structural behavior of truss connection consisted in square hollow steel section. There are two-types to be changed in T-joint shape. One type is TP-series that a brace member is rotated to 45 degree, another type is TR-series that a chord member is rotated to 45 degree. The most important results obtained from the 2nd experiment on the T-joints is as follow; The yielding strength and initial stiffness of TP-series increase more than a current type(TS-series) in $0.6{\leq}{\beta}(d/D){\leq}0.7(0.85{\leq}{\beta}$'$(={\sqrt2}{\cdot}{\beta}){\leq}1.0)$.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.91-98
• /
• 2008

One of the two spindles in the X-lift fractured suddenly during normal operation. The fracture occurred at the notch where the bending moment might be the maximum. Macrofractographic features associated with rotating-bending fatigue are evident on the fracture surface. The 3-D finite element analysis of the X-lift reveals that the spindle rotated under bending. The measured surface strain of the spindle varies cyclically as the spindle rotates. It supports that the spindle rotated under bending. The X-lift is not perfectly symmetrical with respect to both the horizontal and the vertical plane. The slightly unsymmetrical deformation can cause the bending of the spindle.

• Restorative Dentistry and Endodontics
• /
• 제11권1호
• /
• pp.11-18
• /
• 1985

The purpose of this study was to observe the facial, lingual and gingival walls of the cavity walls with various kinds of cutting tools. Class II cavities were prepared in newly extracted sound humen mandibular 1st left premolars, and observed in Sanning electron microscope. Diamond point (#201) and Tungsten Carbide burs (#170L) were used in ultra high speed handpieces (rpm 200000), and Tungsten Carbide bur (#702) and Steel bur (#560) were used in conventional handpieces (rpm 6000). All cavities were prepared under water spray, except for some which were finished with a dry abrasive stone (#57). Some cavities were finished with chisels (#41, 42, 83). The following results were obtained. 1. The cavity walls prepared with Diamond point were rougher than the cavity walls with Carbide burs and Steel burs. 2. The chisels were produced the smoothest surface. 3. The cavity walls which were prepared with cutting blades rotated toward enamel surface from outside, were smoother than cavity walls which were prepared with cutting blades rotated toward outside from the enamel surface.