• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.635-641
• /
• 1994

Recently, Improving the energy efficiency of a pneumatic system and reducing the consumption of compressed air were a concern of scholars at domestic and abroad. The using fields of a pneumatic system are widely used in factory automation of manufacturing line, chemical factories with explosiveness danger and petroleum industries etc. In particular, Pneumatic cylinder is applied to feeding work of workpiece, jig tools and press mechanism, reciprocation and rotary motion with rack and pinion. In this study, The experimental apparatus consisted to pneumatic cylinder, dual supply pressure regulator and solenoid valve. The dual supply pressure regulator connected to outlet port of solenoid valve. The supply pressure (4.5kgf/cm$\^$2/) of compressed air goes into the rodless chamber 1 to drive the pistion rod forward which is named working stage. The supply pressure(2kgf/cm$\^$2/) of compressed air goes into the rod chamber 2 to drive the piston rod backward which is named no-working stage. Accordingly, The research results of this study can be obtained to Energy-Saving Effects of the compressed air about 35%.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.916-921
• /
• 2006

Column mixer is one of the facility to mix fluids at petrochemical plants. The column vibration is caused by pumps for fluid inflow and mixing of inside fluids. This fluid induced vibration is mainly responsible for the reduction of column life. Measurements were performed three times for understanding the vibration characteristics of the column. First experimental results showed the need of stiffness reinforcement. After the reinforcement work, second measurement conformed the difference between two results. Modal analysis was also performed to investigate the resonance of the column vibration and the damage of the rib plate. To confirm the generation of the fluid instability in the column mixer fluid structure interaction analysis using ADINA/FSI was performed which showed the necessity of the modification of the rotary valve.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.05a
• /
• pp.21-24
• /
• 1994

A piezoelectric actuator. which is composed of a piezoelectrically driven stator and a rotor, Is made and the characteristics are investigated experimentally is a new ultrasonic actuator which transforms rotary motion to linear one is proposed and proved to work successfully. If an ultrasonic wave is excited to propagate in the stator, particles on the internal surface move elliptically. Since the internal surface is machined as an internal thread and an external thread(rotor) is put into the stator. the external thread is rotated through the friction force and moved in the axial direction. The traveling wave is excited by a piezoelectric element bonded to the stator. This idea is firstly proposed by S. Ueha, et al. in 1987. However, efficiency of their actuator is less than 3%. In this study, in order to improve characteristics of this type actuator, we used various pitches and number of the screw thread, and materials of rotor, and we obtained good charcteristics.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.52-54
• /
• 1998

LOA is the linear electromechanical device that mover is similar to secondary conductor of LIM. The mover reciprocates along stroke by supplying the alternating current to primary coil. LOA is the simpler and more efficient than other linear apparatus using the rotary motor because LOA produce the thrust force without any mechanical converter such as cam, clutch, belt, rack and pinion, etc. This paper deals with the static characteristics of moving coil type LOA by virtual work method, FEM analysis and experiment Results show that thrust force increases when mover travels form center to both ends.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.3 s.120
• /
• pp.213-219
• /
• 2007

Column mixer Is one of the facilities to mix fluids at petrochemical plants. The vibration of column mixer is usually caused by pumps for fluid inflow and mixing of inside fluids. This fluid induced nitration is mainly responsible for the reduction of column life. Measurements were performed for understanding the vibration characteristics of the column. First measurement results showed the need of stiffness reinforcement. After the reinforcement work, second measurement confirmed the difference between two results. Modal analysis was also performed to investigate the resonance of the column vibration and the damage of the rib plate. To confirm fluid induced vibration at the column mixer fluid structure interaction analysis using ADINA/FSI was performed, which showed the necessity of the modification of the rotary valve.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.2
• /
• pp.103-108
• /
• 2005

Loading/Unloading task in the real industry is performed by crane, but most of the loading/unloading task with the weight of 5kg∼30kg is done by human workers and this kind of work causes industrial disaster of workers. Therefore it is necessary to develop low cost loading/unloading manipulator system to prevent this kind of industrial accidents. This paper is concerned with the design and fabrication of 2 axis pneumatic manipulators using on/off solenoid valves and accurate position control without respect to the external load and low damping in the pneumatic rotary actuator. To overcome the change of external load, switching of control parameter using LVQNN (Learning Vector Quantization Neural Network) is newly applied, which estimates the external loads in the pneumatic cylinder. As an underlying controller, a state feedback controller using position, velocity and acceleration is applied to the switching control system. The effectiveness of the proposed control algorithms are demonstrated through experiments of pneumatic cylinder with various loads.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.81-82
• /
• 2020

Cement paste is the basic material constituting concrete and the most basic data of workability. This study quantitatively evaluated the measured data using a ring flow and a rotary viscometer to estimate the flow of cement paste, and also evaluated the flow and rheology over time. For this, the current work has studied admixtures that affect the fluidity of cement paste. As a result of the experiment, since fluidity and plastic viscosity are inversely proportional to each other, more experimental studies are needed to obtain high fluidity and high viscosity at the same time.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.15-27
• /
• 1981

In order to investigate on the field performance of 3.5PS power tiller and to obtain the optimum using conditions of it, this experiment has been carried on the plowing operation, the rotary harrowing operation and the ridging operation that compared 3.5PS power tiller(KC-450) with the existing 5PS(DT-40) and 8PS(DT-85) power tiller. It has been performed at Suck Jung-Dong, Ansung Country, from March to October in 1980. The results of this field test were obtained as follows; 1. The plowing performance of KC-450 tiller was found to be 125min/10a that was lower than that of DT-85 tiller by 26min/10a in the effective plowing speed 0.9m/sec. 2. The field efficiency of KC-450 tiller was the highest among the power tillers as to be 82 persent that was higher than that of DT-85 tiller by 5 persent in the effective plowing speed 1m/sec. 3. The rotary harrowing performances of DT-40 tiller and DT-85 tiller were higher than that of KC-450 tiller in the rotary harrowing operation of the same speed, and the field efficiency of KC-450 tiller and DT-40 tiller were higher than that of DT-85 tiller in the rotary harrowing operation. 4. The ridging Performance of testing power tillers were nearly equality in the ridging operation of the same speed, and the field efficiency of testing tillers were higher KC-450 tiller than DT-40 tiller, DT-40 tiller than DT-85 tiller. 5. The work performance of power tiller increased with increase in the size of field area. Work performance and field efficiency of KC-450 tiller were higher than other tillers below 8a in field size 6. DT -85 tiller was more useful in deep plowing depth. But below 8a in field size KC-450 tiller was more easily operated and its field efficiency was higher 7. KC-450 tiller should be more useful to operate in the small size field or in the small scale farming and for the cultivation of vegetables, gardening plants, medicinal herb and tobacco plants, or for the cultivation in vinyl house.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.303-308
• /
• 2016

This study was carried out to determine the effects of application levels of fertilizer and sowing methods on yields and nutritive values of Italian ryegrass (IRG) in early spring. Five fertilizer levels were used: Treatment 1, 100-80-80 kg/ha; Treatment 2, 120-100-100 kg/ha; Treatment 3, 140-120-120 kg/ha; Treatment 4, 160-140-140 kg/ha; Treatment 5, 140-120-120 kg/ha of $N-P_2O_5-K_2O$ with silicate fertilizer 200 kg/ha. Dry matter (DM) yield was 8,330 kg/ha in Treatment 5, 7,686 kg/ha in Treatment 4, and 7,347 kg/ha in Treatment 3. There was no significant difference in total digestible nutrients (TDN) content. The content of crude protein was the highest in Treatment 5. Dry matter ratio was the lowest in Treatment 5. In Treatment 3, DM yield was 7,347 kg/ha, when total amounts of fertilizers were applied at one time. However, DM yield was 7,405 kg/ha, when 50% of pre-planting fertilizer and 50% of supplementary fertilizer were applied at different time. There was no significant difference between total application and split application of fertilizers. However, DM yield was 9,469 kg/ha in application treatment with 100 kg/ha of additional urea at three to four leaf stages of IRG. Regarding DM yield by sowing methods of IRG, the following order was found: drill seeding (8,176 kg/ha) > rotary-broadcast seeding-stamping (7,957 kg/ha) > rotary-broadcast seeding (7,810 kg/ha) > broadcast seeding (7,347 kg/ha) > broadcast seeding-rotary (7,034 kg/ha). DM yield (59.57%) was the lowest in broadcast seeding-rotary. Crude protein content was the highest with rotary work but the lowest with broadcast seeding.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.130-137
• /
• 2007

This in vitro study examined the effect of surface defects on cutting blades on the extent of the cyclic fatigue fracture of HEROShaper Ni-Ti rotary files using fractographic analysis of the fractured surfaces. A total of 45 HEROShaper (MicroMega) Ni-Ti rotary flies with a #30/.04 taper were divided into three groups of 15 each. Group 1 contained new HEROShapers without any surface defects. Group 2 contained HEROShapers with manufacturing defects such as metal rollover and machining marks. Croup 3 contained HEROShapers that had been clinically used for the canal preparation of 4-6 molars A fatigue-testing device was designed to allow cyclic tension and compressive stress on the tip of the instrument whilst maintaining similar conditions to those experienced in a clinic. The level of fatigue fracture time was measured using a computer connected the system. Statistical analysis was performed using a Tukey's test. Scanning electron microscopy (SEM) was used for fractographic analysis of the fractured surfaces. The fatigue fracture time between groups 1 and 2, and between groups 1 and 3 was significantly different (p<0.05) but there was no significant difference between groups 2 and 3 (p>0.05). A low magnification SEM views show brittle fracture as the main initial failure mode At higher magnification, the brittle fracture region showed clusters of fatigue striations and a large number of secondary cracks. These fractures typically led to a central region of catastrophic ductile failure. Qualitatively, the ductile fracture region was characterized by the formation of microvoids and dimpling. The fractured surfaces of the HEROShapers in groups 2 and 3 were always associated with pre-existing surface defects. Typically, the fractured surface in the brittle fracture region showed evidence of cleavage (transgranular) facets across the grains, as well as intergranular facets along the grain boundaries. These results show that surface defects on cutting blades of Ni-Ti rotary files might be the preferred sites for the origin of fatigue fracture under experimental conditions. Furthermore this work demonstrates the utility of fractography in evaluating the failure of Ni-Ti rotary flies.