• Journal of Biosystems Engineering
• /
• 제3권2호
• /
• pp.22-33
• /
• 1978

To maintain the self-sufficiency of food production , it is required to improved the productivity and increase the effective utilization of land in the double cropping areas using improved cultivation technology. The following reasons encourage this cours of action because the overlapping rice harvest and barely seeding seasons complete for labour, the lower price of barley makes it financially less attractive to grow and these two facts together are responsible for a decrease in barley being planted in certain more seasonably marginal double cropping areas. Fro these reasons, it is desirable to carry out tests to improve the current cultivation techniques . In this interest , the following studies were carried out in the experimental field located at Banweol-myeon, Whasung-jkun, Gyeonggi-do from October 1977 to July 1978 in order to establish the mechanical method of barley cultivation using the power tiller. The summarized results are as follows. 1. The work performance in the seeding operation using the rotary barley seeder was 68 minutes per 10 ares which compares favourably with 408 min/10a using the conventional method. This is only one sixth of the time required by th conventional method. The operating costs using the rotary barley seeder was 1, 463 won per 10 areas as against 3, 486 Won per 10 ares for the conventional method, showing a saving of about 50% in comparison with the conventional method. 2. In the manure spreading operation, the work performance was 25 min/10a for the manure spreading machine , compared to 1089 min/10a for the manual operations. This is about one fourth of the time required by the conventional method, The operating costs were 810 Won/10a for the machine and 857 Won/10a for the manual labour. This cost shows little advantage by the machine over the manual labor costs. The conventional method of manure spreading will continue pending decision which will develope and improve the machine.3. Work performance in the rolling operation using the barley rolIer was 30 min/lOa which compares favourably with 135 min/10a using conventional method. This was one fourth of the time required by the conventional method. The operating costs were 514 Won/103. for the machine and 1, 003 Won/lOa for manual labour. In the weed control operation, the work performance and operating costs were 45min/lOa, 1, 399won/10a for the herbcide application using the power sprayer, 1, 149min/10a 8, 541won/lOa for the conventional method respectively. This is 26 times higher efficiency in comparison to the conventional method. 4. In the harvesting operation using the reaper binder and tiller attachment, the work performance was 60min/lOa and represents a cost of 2, 039won/10a. The con\ulcornerventional method took 640min/10a at a cost of 4, 757won/lOa. The reaper binder showns a saving of one tenth over the conventional method. The automatic thresher is already recommended for the current situations, and is now being used. 5. From a comparison of the results of the above trials, the serial cultivation system using the attachment for the power tiller such as the rotary barley seeder is now to be recommended for the current barley cultivation system. It is also recommend from these results that the mechanized technology now available must be used to improve and maintain the increase in barley production. It is seen th1t this is the only course now avaihble to solve the peak seasonal requirements of labour needed for l11rvesting and seeding between rice and barley cultivation.

• 한국해양공학회지
• /
• 제3권2호
• /
• pp.138-144
• /
• 1989

It has been very important in various industry fields to improve the fatigue strength characteristics of bearings such as bearing life, fatigue limit, etc., because such poor properties could result in shortening the machinery life as well as in decreasing the accuracy. However, no successful heat treatment criterion seems to be available at present. In this study, the effect of the $170^{\circ}C\times120min$ tempering cycles repeated after $380^{\circ}C\times80min$ oil quenching for $800^{\circ}C$ spheroidizing-annealed bearing steel (STB2) as base metal on the $120^{\circ}C$ high temperature rotary bending fatigue strength characteristics were investigated, including the effects on hardness, Charpy impact value and micro-structure, in order to seek for the best heat treatment condition finally. The important results obtained are as follows : 1) The optimal cycle of tempering so that the fatigue strength .sigma. could become the highest was the 4th cycle. And it is confirmed that this $\sigma_{F}$ is about 6 times more increased than that of base metal, and about 1.3 times more increased than the case of the 1 cycle tempered. 2) As a result of the investigation for the effects of tempering cycles on hardness, the hardness at the tempering number of 2 thru 5 cyles was not decreased severely ; only about 10% decrease from those of the quenched and 1 cycle tempered case. Such hardness is equivalent to $H_{R}$/C61-62 with no bad effect on anti-abrasion of bearing steel. 3) In the case of 2 thru 5 cycle tempering as well as 1 cycle tempering, the impact value was not so improved comparing with the case of quenching, but an increase of 5 to 10% could be expected at least. 4) It was experimentally confirmed that the control of the mechanical properties improvement such as fatigue strength and fatigue life for bearing steels could be possible by the number of tempering cycles.

• 한국해양공학회지
• /
• 제3권2호
• /
• pp.638-638
• /
• 1989

It has been very important in various industry fields to improve the fatigue strength characteristics of bearings such as bearing life, fatigue limit, etc., because such poor properties could result in shortening the machinery life as well as in decreasing the accuracy. However, no successful heat treatment criterion seems to be available at present. In this study, the effect of the $170^{\circ}C\times120min$ tempering cycles repeated after $380^{\circ}C\times80min$ oil quenching for $800^{\circ}C$ spheroidizing-annealed bearing steel (STB2) as base metal on the $120^{\circ}C$ high temperature rotary bending fatigue strength characteristics were investigated, including the effects on hardness, Charpy impact value and micro-structure, in order to seek for the best heat treatment condition finally. The important results obtained are as follows : 1) The optimal cycle of tempering so that the fatigue strength .sigma. could become the highest was the 4th cycle. And it is confirmed that this $\sigma_{F}$ is about 6 times more increased than that of base metal, and about 1.3 times more increased than the case of the 1 cycle tempered. 2) As a result of the investigation for the effects of tempering cycles on hardness, the hardness at the tempering number of 2 thru 5 cyles was not decreased severely ; only about 10% decrease from those of the quenched and 1 cycle tempered case. Such hardness is equivalent to $H_{R}$/C61-62 with no bad effect on anti-abrasion of bearing steel. 3) In the case of 2 thru 5 cycle tempering as well as 1 cycle tempering, the impact value was not so improved comparing with the case of quenching, but an increase of 5 to 10% could be expected at least. 4) It was experimentally confirmed that the control of the mechanical properties improvement such as fatigue strength and fatigue life for bearing steels could be possible by the number of tempering cycles.

• 한국융합학회논문지
• /
• 제12권3호
• /
• pp.197-204
• /
• 2021

본 연구는 유압기계에 사용되는 유압 시스템에서 기포를 저감시킴으로써 효율을 증대시키는 장치에 관한 것이다. 해외 상용품인 기포저감장치의 역설계를 진행하였고, 실험에 용이하게 제품들을 제작하였다. 작동성 실험을 위해 총 3종류의 시스템을 구성하였다. 해외 상용품을 Base Model로 설정하였고, 하강하는 유체의 표면적을 넓히기 위해 회전형 Rotator와 경사형 Rotator를 추가하였으며, 유체를 균등하게 분배해주기 위해 하단부에 슬롯이 파진 환형 균등분배 파트를 추가 적용하였다. 또한 내부 유동경향을 분석하였으며, 유체의 직선적인 흐름을 균등하게 분배시키는 시스템을 1차 개선 모델로 선정하였고, 설계 변수를 적용하여 추가 유동해석을 진행하였다. 1차 개선 모델을 바탕으로 경사형 Rotator의 각도가 45°일 때를 2차 개선 모델로 선정하였다. 이를 기준으로 환형 균등분배 파트의 출구너비를 변수로 설정한 결과, 환형 파트의 하단부 슬롯 직경이 10mm일 때 기포저감 효율이 가장 높았다. 최종적으로 Base Model 대비 평균 단면 유속이 147% 감소한 시스템을 최종 개선 모델로 도출하였다.

• Journal of Biosystems Engineering
• /
• 제6권2호
• /
• pp.20-32
• /
• 1982

보급초기(普及初期)에 있는 농용(農用)트랙터의 농가이용실태(農家利用實態)를 조사분석(調査分析)하여 정부(政府)의 농업기계화시책(農業機械化施策)의 기초자료(基礎資料)로 활용(活用)하고자 8개도(個道) 32개군(個郡)을 대상(對象)으로 설문(設問)과 기장조사(記帳調査)를 통(通)하여 '80년(年) 1월(月)부터 12월말(月末)까지 트랙터의 농작업이용실태(農作業利用實態) 및 농가특성(農家特性)을 조사분석(調査分析)한 결과(結果)는 다음과 같다. 가. 트랙터는 수도작농가(水稻作農家)에 71.5%, 축산농가(畜産農家) 17.0%, 과수농가(果樹農家) 7.0%, 기타농가(其他農家) 4.5%의 비율(比率)로 분포(分布)되어 있으며, 이중 64.3%는 대형(大型)트랙터이었고 35.7%가 소형(小型)트랙터(19~23ps)이었다. 나. 부착작업기(附着作業機)중 쟁기와 로타베이터는 대부분(大部分)이 보유(保有)하고 있었으나 소형(小型)트랙터의 트레일러는 보유율(保有率)이 70.6%로, 농작업(農作業)에서 운반작업(運搬作業)이 차지하는 비중(比重)을 감안할 때, 비교적(比較的) 낮았으며, 기타(其他) 작업기(作業機)는 균평작업기(均平作業機)를 제외(除外)하고는 보급률(普及率)이 극(極)히 저조(低調)하였다. 다. 트랙터소유농가(所有農家)의 대당평균(臺當平均) 경작면적(耕作面積)은 수도작농가(水稻作農家) 3.9%, 축산농가(畜産農家) 13.9%, 과수농가(果樹農家) 7.4(ha)이었으며 이러한 규모(規模)는 트랙터의 부담가능면적(負擔可能面積)에 훨씬 미달(未達)하는 규모(規模)이었다. 라. 트랙터 운전자(運轉者)의 연령(年齡)은 20,30대(代)가 약(約) 70%이었고, 90%이상(以上)이 중졸이상(中卒以上)의 학력(學歷)을 가졌으며, 학력수준(學歷水準)이나 경력(經歷)에 비(比)하여 정비기술(整備技術)은 아주 낮은 것으로 나타났다. 마. 현(現) 보급기종(普及機種)의 마력규모(馬力規模)나 성능상(生能上)의 별 다른 문제점(問題點)은 발견(發見)되지 않았으나 농민(農民)의 마력성향(馬力生向)으로 보아 앞으로 20-30마력범위(馬力範圍)의 소형(小型)트랙터 수요(需要)가 증가(增加)될 것으로 예측(豫測)된다. 바. 트랙터의 각종(各種) 농작업이용시간(農作業利用時間)은 연간(年間) 약(約) 100일(日)에 400hr로 나타났으며 수도작농가(水稻作農家)가 412.4hr로 가장 높고 과수농가(果樹農家)가 377.7hr로 가장 낮았다. 사. 연간이용시간중(年間利用時間中) 운반작업(運搬作業)이 47.3%, 경운정지작업(耕耘整地作業)이 41.6%이었으며, 운반작업(軍搬作業)은 축산농가(畜産農家), 경운정지(耕耘整地) 및 평균작업(均平作業)은 수도작농가(水稻作農家), 기타작업(其他作業)은 과수농가(果樹農家)가 가장 많았다. 마력별(馬力別)로는 운반(運搬), 정지(整地) 및 방제작업(防除作業)은 대형(大型)트랙터 보다는 소형(小型)트랙터가, 경운(耕耘), 균평(均平), 로다작업(作業)은 대형(大型)보다 소형(小型)트랙터가 많았다. 아. 월별(月別) 이용시간(利用時間)은 5월(月)에 가장 높은 피크현상(現象)을 가졌으며, 자가이용시간(自家利用時間)이 경영형태(經營形態)에 따라서는 현저(顯著)한 차이(差異)를 가졌으나 마력별(馬力別)로는 별차(別差)가 없었던 반면(反面)에, 총이용시간(總利用時間)은 정반대(正反對)의 현상(現象)으로 마력(馬力)에 따른 차이(差異)는 현저(顯著)하나 경영형태(經營形態)에 따른 차이(差異) 별로 없는 것으로 나타났다. 자. 운전자(運轉者)의 학력수준(學力水準)이 높고 연령(年歷)이 많을 수록 이용시간(利用時間)은 감소(減少)되었으며 이는 학력(學歷)이 높고 연령(年歷)이 많은 경우(境遇) 임작업(賃作業)을 기피(忌避)하는 현상(現象)때문인 것으로 사료(思料)되었다. 차. 대당평균(臺當平均) 연간(年間) 임작업시간(賃作業時間)은 171.3hr으로 이중 균평작업(均平作業)이 35.4%로 가장 높았으며, 임작업율(貨作業率)은 수도작농가(水稻作農家)가 63.7%, 축산농가(畜産農家) 31.7%, 과수농가(果樹農家) 22.4%이었으며 작업별(作業別)로는 균평작업(均平作業)의 임작업율(賃作業率)이 78.2%로 가장 높았다. 카. 임작업료(賃作業料)는 경운정지작업(耕耘整地作業)은 ha당(當) 40,000선(線)이었으며 지역(地域)에 따라 영남지방(嶺南地方)이 가장 비싸고 중부지방(中部地方)이 비교적(比較的) 싼것으로 나타났다. 다. 경운작업능률(耕耘作業能率)은 논에서 소형(小型)은 7.8hr/ha, 대형(大型)트랙터는 4.3hr/ha이었으며, 정지작업능률(整地作業能率)은 각각(各各) 6.5, 4.3hr/ha이었다.