• Journal of Biosystems Engineering
• /
• v.9 no.2
• /
• pp.27-36
• /
• 1984

This study was carried out to investigate the effects of the tilling depth, tilling travel speed and soil shear stress on the tilling load characteristics and power requirement for rotary tillers. The results obtained from the study are summarized as follows. 1. The average and maximum PTO torque increased as the tilling depth, tilling pitch and soil shear stress increased. A multiple linear regression equation to estimate the average PTO torque in terms of the above parameters was developed. 2. The ratios of maximum PTO torque to the average torque were in the range of 1.17 to 1.65 for the various tilling conditions tested. The variation in PTO torque increased greatly as the tilling pitch and soil shear stress increased, but decreased as the tilling depth increased. 3. Power requirement for the PTO shaft increased with the tilling depth, travel speed and soil shear stress, but decreased slightly as the tilling pitch increased. A multiple linear regression equation to estimate power requirement for the PTO shaft in terms of the above parameters was developed. 4. The specific power requirement for the rotary tiller was in the range of $0.008-0.015ps/cm^2$ for the various tilling conditons tested. The specific tilling capacity decreased as the tilling depth and soil shear stress increased, but increased with the tilling pitch. A multiple linear regression equation to estimate the specific tilling capacity in terms of the above parameters was developed.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.231-239
• /
• 2004

To keep an enterprise's competitiveness on the condition of the automatic manufacturing system such as FA, FMS and CIM, all the maintenance problems should be considered seriously in not only in production and maintenance but also in related industrial productivity. This paper presents the study of equipment reliability improvement for rotary-machine vibration analysis. Based on these analyses, the maintenance management information system, and the machinery condition diagnosis technique are studied by using of the real-time diagnostic. Therefore, it is expected to improve the efficiency of business processes in the production and safety when we use this system.

• Journal of Biosystems Engineering
• /
• v.26 no.3
• /
• pp.229-236
• /
• 2001

The torque loads acting on the input shaft of the transmission and final driving shaft of the tractor having a cage wheel attached to the driving tries as a traction aid were measured during the rotavating operations in a poorly drained paddy field. Using the measured load data load spectra were constructed. Effects of the design parameters of the cage wheel on the load characteristics were also analyzed. The torque load exerted on the input shaft decreased as the diameter of the cage wheel increased and increased as the rotavator speed increased. The torque load exerted on the final driving shaft increased as the working speed of the tractor increased and decreased as the rotavator speed increased. The torque load on the final driving shaft with the cage wheel were greater than those without the cage wheel.

• Journal of Biosystems Engineering
• /
• v.22 no.4
• /
• pp.451-458
• /
• 1997

In order to investigate the compost process and the evaporating phenomenon, a rotary reversing compost system has been tested in swine fm. In the summer season, the compost temperature were varied in the range of 50~$60^{\circ}C$ and the ash content has been increased to 12.8% showing in average of 24.7% at the end of phase. In the winter season, the compost temperature were varied in the range of 40~$57^{\circ}C$ and the ash content has been increased to 8.5% showing in the average of 18% at the end of phase. In summer the compost facility could handle all of the animal waste, but in winter it could not handle 1/4~1/3 of the animal excrement. The needed sawdust by this method could be reduced to 1/3 than that of the mixing method at the beginning of compost process.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.684-690
• /
• 2003

A new electrostatic rotary atomizing painting equipment using air turbine was developed. Based on the overall design requirements of painting equipment basic design specifications of the equipment parts such as air turbine and atomizing disk are defined from the present conceptual design model. Air turbine is designed with the section profile of NACA airfoil, and its internal flow field is analyzed by commercial CFD code. Atomizing disk is designed to achieve the ligament type spray of paint with the use of visualization technique. Various experiments and tests are conducted to investigate the spray and the transfer characteristics of newly-designed painting equipment, and the measurement results are compared with the those of conventional painting equipments.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1223-1225
• /
• 2004

In difference with the rotary type electrical machinery, the linear induction motor(LIM) that generates the direct thrust directly, is widely used for the operation system of electrified railroad, elevation system, conveyer system, and so on. The operational principle of linear induction motor is constructively similar to the general rotary induction motor. It is difficult to realize the complicate linear induction motor which is applied SVPWM system, but widely used in vector motor control system or servo control system because of its high performance in current control. In this paper, we presented the dynamic characteristic analyzing methode, and calculated efficiently the end effect by using equivalent circuit methode in the operating linear induction motor control system for Maltlab simulink modeling.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.227-238
• /
• 1993

IRRI Engineering Division has developed a well drilling rig attachment that matched power tiller or hand tractor. It was designed in response to the growing demand for ground water utilization for small-scale irrigation, especially in drought-sticken and rained farms in Asian countries. The power tiller-driven rig can drill 30 meters of 100mm well in an unconsolidated formation in one day and can be rapidly converted from rotary to jetting or to the percussion method of drilling to suit different soil and rock formation. In addition, the power tiller can be quickly installed or removed from the rig frame and can be used for transporting the rig to other sites. The rig can be dismantled into smaller sub-assemblies for carrying by hand into less accessible areas. One manufacturer in Central luzon Philippines has started to produce the rig for well drillers in Central Luzon. The Department of Agriculture in the Philippines have procured thirty three(33) units of these machines f r their Shallow Tubewell program.

• Tribology and Lubricants
• /
• v.36 no.1
• /
• pp.11-17
• /
• 2020

In manufacturing operations, oil plays a crucial role in reducing friction and wear among interacting surfaces at varying velocities, loads, and temperature. Hydrocarbon oil is considered the origin of lubrication oils. However, this base oil has been limited in its use as it is a principal cause of pollution. This research focuses on identifying a biodegradable base oil lubricant that possesses a stable coefficient of friction and viscosity with temperature. Friction analysis is conducted by employing a pin on a disk tribotester with a fixed load of 10 N at varying sliding speeds ranging from 0.06 m/s to 0.34 m/s. Oil viscosity analysis is perfomed at room temperature by using a rotary viscometer. Tests are performed using canola oil and paraffin oil as lubricants. The results indicate that the viscosity of canola oil is more efficient than paraffin oil. The non-dimensional characteristic number according to the Stribeck curve reveals an elastohydrodynamic lubrication regime with canola oil lubrication. A comparison of both lubricants reveals that, the friction efficiency of canola oil and paraffin oil does not differ considerably. However, the friction in canola oil is observed to decrease more than that in paraffin oil at an elevated sliding speed. The tests confirm that canola oil is potent in minimizing the friction coefficient of SCM440 bodies interacting with one another as well as acted upon by load.

• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.44-52
• /
• 2024

In this study, we predicted PTO power requirements based on torque predicted by the discrete element method and the multi-body dynamics coupling method. Six different scenarios were simulated to predict PTO power requirements in different soil conditions. The first scenario was a tillage operation on cohesionless soil, and the field was modeled using the Hertz-Mindlin contact model. In the second through sixth scenarios, tillage operations were performed on viscous soils, and the field was represented by the Hertz-Mindlin + JKR model for cohesion. To check the influence of surface energy, a parameter to reproduce cohesion, on the power requirement, a simple regression analysis was performed. The significance and appropriateness of the regression model were checked and found to be acceptable. The study findings are expected to be used in design optimization studies of agricultural machinery by predicting power requirements using the discrete element method and the multi-body dynamics coupling method and analyzing the effect of soil cohesion on the power requirement.

• Journal of Biosystems Engineering
• /
• v.39 no.1
• /
• pp.11-20
• /
• 2014

Purpose: Walking type cultivator used for weeding generated excessive handle vibration as well as bouncing motion depending on the weeding speed. This research was conducted to define a design factor of the rotary weeding blades for reducing soil reaction forces as well as hand vibration. Methods: The motion and forces acting on the rotary blades were reviewed to find out the most influencing parameter on hand vibration. The installation angle (IA) of the blade was selected and analyzed to determine the condition of no reaction force less. For removing the unnecessary upward soil reaction, the design factor theory of weeding blade was suggested based on geometrics and dynamics. For evaluation of design factor theory, the experiment in situ was performed base on ISO 5349:1. The vibration $a_{hv}$ and theoretical value $X_{MF}$ were compared with two groups that one was positive group ($X_{MF}$ > 0) and the other was negative group ($X_{MF}$ < 0). Results: $X_{MF}$ was derived from rotational velocity, forward velocity, disk diameter, weeding depth, blade's width and IA of blade. Two groups had significant difference (p < 0.05). In aspect of the group mean total exposure duration, positive group was 17.53% bigger than negative group. When disk radius 100, 150 and 200 mm, minimum IAs were $4{\sim}27^{\circ}$, $3{\sim}15^{\circ}$ and $2{\sim}10^{\circ}$, respectively. A spread sheet program which calculated XMF was developed by Excel 2013. Conclusions: According to this result, minimum IA of weeding blade for soil reaction reduction could be obtained. For reduction hand-arm vibration and power consumption, minimum IA is needed.