• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.553-559
• /
• 2022

본 논문에서는 cascode GaN FET의 하프 브릿지 구성에서 오실레이션 억제를 위한 RC 스너버 회로 설계 기술을 분석한다. 대표적인 WBG 소자인 cascode GaN FET는 우수한 고속 스위칭 특성이 우수하다. 다만, 이러한 고속 스위칭 특성으로 인하여 false turn-off 문제가 야기되며, 이를 억제하기 위해 RC 스너버 회로가 필수적이다. 따라서, 일반적으로 많이 사용되는 실험 기반의 선정 기법과 근궤적법을 이용한 분석 기법을 비교한다. 일반적인 방법의 경우 실험적 경험을 바탕으로 오실레이션 억제 성능이 만족될 때까지 지속적인 회로 변경이 필요하다. 하지만, 근궤적 기법의 경우 비진동 R-C 맵을 기반으로 초기값을 설정 할 수 있다. 이러한 설계 기술에 따른 성능을 비교하기 위해 모의실험과 실제 더블 펄스 회로 구성을 통한 실험을 진행하였다.

• 한국작물학회지
• /
• 제46권5호
• /
• pp.416-419
• /
• 2001

Hypernodulation soybean mutant, SS2-2, is characterized with greater nodulation and nitrogen fixing ability in the root nodule than its wild type, Shinpaldalkong 2. The present study was performed to identify a genetic locus conferring hypernodulation in soybean mutant SS2-2 and to determine whether the gene controlling the hypernodulation of SS2-2 is allelic to that controlling the supernodulation of nts382 mutant. Hybridization studies between SS2-2 and Taekwangkong revealed that the recessive gene was responsible for the hypernodulation character in soybean mutant SS2-2. Allelism was also tested by crossing supernodulating mutant nts382 and hypernodulating mutant SS2-2 that both hypernodulation and supernodulation genes were likely controlled by an identical locus. Molecular marker mapping of hypernodulation gene in SS2-2 using SSR markers confirmed that the gene conferring hypernodulation was located at the same loci with the gene conferring supernodulation. It is interesting to note that the same gene controlled the super- and hyper-nodulation characters, although SS2-2 and nts 382 exhibited differences in the amount of nodulation in the root system. Further genetic studies should be needed to clarify the genetic regulation of super- and hyper-nodulation in soybean.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.408-414
• /
• 2014

After drilling operations at the offshore plant to production to crude oil to high pressure. After that time the low pressured of pipe inside when the secondary produce so oil recovery is reduced. At that time injection sea water at the pipe inside through water injection pump that the device Increase recovery so to be research and development at many industry. So developing 3-stage water injection pump at the domestic company. A variety of mathematical analysis during the detailed design analysis was not made through the dynamics characteristic. In this paper, a 2D finite element analysis is performed through the dynamics of the present study was the validation of the model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.60-64
• /
• 2013

Water injection pump produced the 1st oil well through the high pressure after the Deep water oil well drilling. After finish the work it is hard to produce only using itself pressure due to low pressure. Therefore it can be increased recovery factor through the injection seawater of high pressure. Is the key equipment used in the marine plant and it is developing at many industries. In this paper, Analyze changes in the natural frequency due to the stiffness of the bearing. Analyze the critical speed of the natural frequency due to the change of operation speed. And evaluate the Stability. And then analyze the displacement and clearance through the unbalance response this way has contributed to the reliability of the developing product. Through a mathematical analysis.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.282-282
• /
• 2022

Arsenic (As) is a toxic heavy metal that affects the major rice-growing regions of the world and can cause cancer in humans. Rice paddy fields in South Asia are mostly dependent on arsenic-contaminated water sources due to which rice takes up the arsenic from the soil through roots and accumulates it in plant different parts. Here, we present a quantitative trait locus (QTL) mapping study to find out candidate genes conferring As toxicity tolerance in rice (Oryza sativa L.) at the seedling stage. Three weeks old, 120 double haploid CNDH lines derived from a cross between the Indica variety Cheongcheong and the Japonica variety Nagdong and their parental lines were used by treating with 25 μM As. After 2 weeks ofAs stress, 5 traits such as; shoot length (SL), root length (RL), shoot fresh weight (SFW), root fresh weight (RFW), and chlorophyll contents (CHC) were measured. A linkage map of 12 rice chromosomes was constructed from genotypic data DH lines using 778 SSR markers. The linkage map covered a total genetic distance of 2121.7 cM of the rice genome with an average interval of 10.6 cM between markers. A total of seventeen QTLs (LOD>2) were mapped on chromosomes 1, 2, 3, 6, 7, 8, 9, 11, and 12 using composite interval mapping with trait-increasing alleles coming from both parents. Five QTLs for SL, Two QTLs for RL, Five QTLs for SHL, Three QTLs for RFW, and Two QTLs for CHC were detected. The QTLs related to CHC were selected for forther study.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.264-270
• /
• 2011

The goal of this study is a stability evaluation through eigenvalue and rotor dynamics analysis of the vacuum pump. The vacuum pump used is a roots type pump, one of the dry middle vacuum pumps, is necessary at the procedure to produce semiconductor and display. The eigenvalue evaluation is solved by numerical analysis through using Modal test and 2D 3D models. Both the experiment and the analysis result are similar, the analysis result using 2D is more oculate the 3D model comparing with test result. So rotor dynamic evaluation is performed through using 2D model. Rotor dynamic evaluation used the campbell diagram and root locus map which were acquired by complex eigenvalue analysis. And we checked minimum clearance of vacuum pump composition between two rotors through unbalance response analysis. Thus, vacuum pump, the target object of this study, was evaluated to be operated stably.

• 한국소음진동공학회논문집
• /
• 제24권6호
• /
• pp.462-469
• /
• 2014

After drilling operations at the offshore plant, crude oil is producted under high pressure. After that time, oil recovery is reduced, because the pressure of the pipe inside is low during the secondary produce. At that time injection sea water at the pipe inside through water injection pump that the device increase to recovery. A variety of mathematical analysis during the detailed design analysis was not made through the dynamics characteristic at the domestic company. 2D model has reliability of analysis results for the uncomplicated model. Also element and the node the number of significantly less than in the 3D model. So, the temporal part is very effective. In addition, depending on the quality of mesh 3D is a real model and FEM model occurs error. So, user needs a lot of skill. In this paper, a 2D finite element analysis was performed through the dynamics analysis and the study model was validated.

• 대한기계학회논문집A
• /
• 제37권12호
• /
• pp.1483-1487
• /
• 2013

물 분사 펌프는 심해 유정의 시추작업 후 유정 내 높은 압력으로 인하여 원유를 1 차 생산하고 이후 유정 내 압력이 낮아져 유정 자체의 압력 만으로 생산이 어려울 때 고압의 해수를 유정에 주입해 회수율을 높이는 해양플랜트에서 사용되는 핵심 기자재이며, 여러 기업에서 개발 중이다. 본 논문은 회전체의 동특성 을 분석하여 베어링 강성에 따른 고유진동수 변화분석, 운전속도 변화에 따른 고유진동수의 변화와 위험속도 분석, 안정성 평가, 불평형 응답을 통하여 변위와 틈새 관계 분석 등의 수학적 해석을 통하여 개발 중의 제품의 신뢰성에 기여하였다.

• 한국정밀공학회지
• /
• 제26권6호
• /
• pp.81-89
• /
• 2009

Dancer systems are typical equipment for attenuation of tension disturbances. Lately, demands for high speed roll-to-roll machines are rising but it is prior to attenuate the tension variation on the web entering into the printing zone to achieve the speed increment. Maintaining a constant tension before the first printing cylinder is the key of high speed, high quality printing. Dancer has been researched in two ways, whether it is controlled or not. The first one is active dancer and the other one is passive dancer. In the active dancer, a position of idle roll of dancer is measured and the roll is moved by external hydraulic cylinder to control tension disturbances. While the passive one composed with spring, damper and idle roll has no external actuator to position the idle roll. The tension disturbance causes movement of dancer roll and the displacement of the roll regulates the tension variation. On the other hand a composite type of dancer is applied for roll-to-roll printing machines. It has same apparatus as passive dancer. The displacement of roll is measured and front(or rear) driven roller is controlled to position the roll. In this paper, it is presented an analysis of pendulum dancer including position feedback PI control and logic for PI gain tuning in roll-to-roll machines. Pole-zero map and root locus with varying system parameters gives a design method for control of the dancer.