• Research in Plant Disease
• /
• v.29 no.4
• /
• pp.459-463
• /
• 2023

This study was conducted to investigate the plant-parasitic nematodes of ornamental foliage plants, citrus orchards, and tea plantations from July to December 2022. As a result of the investigation of plant-parasitic nematodes in 415 foliage plants, root-lesion nematodes were detected most frequently, followed by root-knot nematodes, pin nematodes, and other nematodes. In tea plantations, spiral nematodes, cyst nematodes, and root-knot nematodes were detected. Citrus nematodes, ring nematodes, and root-knot nematodes were discovered in citrus orchards. In foliage plants, tea plantations, and citrus orchards, the detection rate of plant-parasitic nematodes was not high, but root-lesion nematodes were detected. Therefore, it is necessary to apply appropriate control methods to manage root-lesion nematodes during the cultivation of foliage, tea, and citrus plants.

• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.42-48
• /
• 2012

Due to increase in demand of stable and long pipelines in natural gas industry, wide range of researches are being performed on automation welding to improved welding quality with respect to weld process parameters in real time measurement. In particular, the coupling between the pipe manufacturing process and location of the weld seam, the measured size of the gap that exists in the weld position and the weld angle depending on whether the movement of molten weld. This is due to absence of controlling welding penetration position, depending on the required size of the angle of the setting. In addition, the optimum welding conditions must be considered while selecting, the correlation between these variables and the systematic correlation has not yet been identified. Therefore, in most welded pipe root-pass weld solely depends on the experience of workers in relation to secure a stable weld quality. In this study, automation welding system is implemented to select a suitable root-pass STT (Surface Tension Transfer) welding method using the optimal welding conditions. To successfully accomplish this objective, there were various welding conditions used for welding experiment to confirm that the assessment required for construction through the pipe and automatic welding process is proposed to optimize this plan.

• Journal of Plant Biotechnology
• /
• v.44 no.2
• /
• pp.164-170
• /
• 2017

A rapid and efficient in vitro regeneration system was established for Hibiscus syriacus L. The successful regeneration protocol employs induction of shoot organogenesis on leaf, petiole, and root explants. Among the various plant growth regulators evaluated, thidiazuron (TDZ) was the most effective for inducing rapid shoot formation. Most efficient shoot regeneration frequency was obtained from Murashige and Skoog (MS) media containing 0.01 mg/L TDZ. Regeneration efficiency was highest in the roots, and lowest in the leaves. A combination of 0.01 mg/L TDZ with benzyladenine (BAP) markedly improved the frequency of shoot differentiation from the root (up to 98%) and petiole (up to 88%) explants. Furthermore, leaf and petiole explants showed the highest frequency of shoot induction in half-strength MS media containing 0.01 mg/L TDZ and 1.0 mg/L BAP, while root explants formed the greatest number of shoots when 0.01 mg/L TDZ and 0.1 mg/L BAP were added to half-strength MS media. Although the frequency of shoot differentiation from leaf explants was only 50%, the leaf is considered the most efficient plant organ for use in tissue culture because leaves are easier to obtain than roots and petioles. Our findings show that various organs of H. syriacus can be used for plant regeneration, and the protocol developed in this study may be applicable in the horticulture industry.

• Food Science and Biotechnology
• /
• v.16 no.2
• /
• pp.238-242
• /
• 2007

Square root models were developed for predicting the kinetics of growth of Listeria monocytogenes in sesame leaves as a function of temperature (4, 10, or $25^{\circ}C$). At these storage temperatures, the primary growth curves fit well ($R^2=0.898$ to 0.980) to a Gompertz equation to obtain lag time (LT) and specific growth rate (SGR). The square root models for natural logarithm transformations of the LT and SGR as a function of temperature were obtained by SAS's regression analysis. As storage temperature ($4-25^{\circ}C$) decreased, LT increased and SGR decreased, respectively. Square root models were identified as appropriate secondary models for LT and SGR on the basis of most statistical indices such as coefficient determination ($R^2=0.961$ for LT, 0.988 for SGR), mean square error (MSE=0.l97 for LT, 0.005 for SGR), and accuracy factor ($A_f=1.356$ for LT, 1.251 for SGR) although the model for LT was partially not appropriate as a secondary model due to the high value of bias factor ($B_f=1.572$). In general, our secondary model supported predictions of the effects of temperature on both LT and SGR for L. monocytogenes in sesame leaves.

• Journal of Applied Biological Chemistry
• /
• v.59 no.1
• /
• pp.13-17
• /
• 2016

As natural plant-based industry has been expanded, the use of oriental medicinal plants as cosmeceutical material received a lot of attentions in the cosmetic industry. Among various medicinal plants, Potentilla chinensis have drawn interests for its biological effects. Although several attempts were tried to study its biological effect as medicinal plant, only limited results were reported to evaluate its biological effect as cosmeceutical material. In this study, we examined the possibility of root extract from Potentilla chinensis as a cosmeceutical material because the root part has been reported to have several kinds of health promoting effects. After extraction of roots, biological evaluation including anti-inflammation, anti-wrinkle, whitening effect and moisturizing effect was performed. As a result, the root extract showed remarkable biological activities through stimulating synthesis of elastin and aquaporin-3, and inhibiting melanin synthesis, cyclooxygenase-2 expression and expression of metallopeptidase-1.

• Korean Journal of Plant Resources
• /
• v.22 no.5
• /
• pp.454-460
• /
• 2009

Phyllanthus urinaria was an important species in Korea and distributed in all around of Korea. The roots and stems of this plant have been used for natural medicine for the treatment of diabetes, the hepatitis B virus and disturbances of the kidney and urinary bladder. Production of adventitious roots in P. urinaria by in vitro cultures could be used as alternatives materials. Shoot and root segments from P. urinaria seedling were cultured on Murashige and Skoog (MS) medium supplemented with 3.0 mg/L IBA and 30 g/L sucrose. After 4 weeks of culture, the highest induction of adventitious roots was obtained from the shoot part. Frequency of adventitious root formation on medium with various kinds of auxins (IAA, NAA, 2,4-D, and IBA) and various concentrations of IBA (0, 0.1, 0.5, 1.0, 3.0, and 5.0 mg/L) was tested. The maximun induction of adventitious root was obtained on medium with 0.5 mg/L IBA. In liquid culture, growth of root was best on medium supplemented with 30 g/L sucrose. Adventitious roots were cultured in 5 L bioreactor containing 1/2 MS medium supplemented with 0.5 mg/L IBA and 30 g/L sucrose and mass-production of adventitious roots was successfully achieved. These results revealed the first attempt for the production of adventitious roots in P. urinaria.

• Korean Journal of Agricultural Science
• /
• v.33 no.1
• /
• pp.43-56
• /
• 2006

In this thesis we aim at analyzing international competitive power of Chinese ginseng in comparison with Korean ginseng and searching policy direction for Korea to compete Chinese ginseng industry. We summarized the research results as follows; First, we examine the structural change of ginseng industry of China. Second, we review the theories for international competitiveness and apply the method of analyzing competitiveness to ginseng industry. Third, we compared the international competitive power of the ginseng industry between China and Korea and found that Chinese ginseng, estimated by Revealed Comparative Advantage(RCA) at about 15, still remains high competitiveness in terms of cost and price but lowering price competitiveness recently. Based on the research results, we suggest export promotion strategies of the Korean ginseng as follows; 1) Korean government should enforce trade cooperation with China so as to register Korean root ginseng an importable medicine. 2) Korean ginseng producer should develop various products such as capsules, powders and etc. according to China's consumer purchasing power and taste. 3) Korean ginseng should be sold as an differentiated commodity so that it will contribute to building consumer loyalty to Korean ginseng, makes market share superior to other cheaper ginseng products in China. 4) In order to be effective brand marketing and product advertisement, there should be established reliable networks to process and distribute Korean ginseng products exclusively.

• The Journal of Asian Finance, Economics and Business
• /
• v.5 no.2
• /
• pp.15-24
• /
• 2018

The study examines the magnitude of economic spillover and the impact of foreign direct investment (FDI) inflows on the efficiency of the bank industry in China. This study employs unit root tests, cointegration tests and cointegrating regression analysis, including fully modified ordinary least squares (FMOLS), canonical cointegrating regression (CCR) and dynamic OLS (DOLS) to test the proposed hypotheses. The sample is restricted to the period of time in which monthly data is available and comparable among variables for the period from January 2002 to October 2013 (142 observations). All of the time series data was collected and retrieved from the People's Bank of China, China Monthly Statistics from the National Bureau of Statistics of China, and International Financial Statistics database from International Monetary Fund. The results of the Johansen cointegration test suggest that there is a long-run equilibrium relationship between FDI inflows, foreign exchange rate and banks performance in China. The results of cointegrating regression analysis using FMOLS, CCR and DOLS suggest that M2 supply and FDI inflows are significant at the 0.01 level. The results confirm that FDI inflows in the banking sector are positively related to the increase of banks productivity and performance and short-term loans in China. However, the results suggest that Chinese Yuan currency exchange rate to U.S. dollar is not significant in the banking and financial industry of China.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.451-462
• /
• 2015

Safety is the first priority in civil aviation, and so the International Civil Aviation Organization (ICAO) has introduced and mandated the use of Safety Management Systems (SMS) by airlines, airports, air traffic services, aircraft maintenance organizations, and training organizations. The aircraft manufacturing industry is the last for which ICAO has mandated the implementation of SMS. Since SMS is a somewhat newer approach for most manufacturers in the aviation industry, they hardly believe in the value of implementing SMS. The management of safety risk characteristics that occur during early aircraft development stages and the systematic linkage that the safety risk has to do with an aircraft in service could have a significant influence on the safe operation and life cycle of the aircraft. This paper conducts a case analysis of the McDonnell Douglas MD-11 accident/incident to identify the root causes and safety risk levels, and also verified why aircraft manufacturing industry should begin to adopt SMS in order to prevent aircraft accident.

• Asia-Pacific Journal of Business
• /
• v.11 no.2
• /
• pp.27-43
• /
• 2020

Purpose - This study explores the impact of the real estate industry on related industries for the perspective of Chinese steel companies. Design/methodology/approach - The impact of housing prices on the 41 listed steel companies' performance was analyzed by using the panel data model. We used two kinds of housing price indexes that are set in the panel data models to estimate the range of the real estate market, driving the performance growth of steel listed companies. Moreover, the net profit of steel companies is used as the dependent variable. To test the stability of the model, ROA used as a dependent variable for the robustness test. Also, to avoid the time trend of housing prices, this paper selects the growth rate of housing prices as the primary research variable. After Fisher-type testings, there is no unit root problem in both independent and dependent variables. Findings - The results indicated that the rise in the housing price has a positive influence on the steel company performance. When the housing price increases by 1%, the net profit of steel enterprises will increase by 5 to 20 million yuan. Research implications or Originality - In this paper, empirical data at the micro-level and panel model are used to quantify China's real estate industry's driving effect on the iron and steel industry, providing evidence from the microdata level. It helps us to understand further the status and role of China's real estate industry in the economic structure.