• Proceedings of the KACD Conference
• /
• 2007.05a
• /
• pp.281-281
• /
• 2007

• Journal of the Korean Society for Heat Treatment
• /
• v.32 no.4
• /
• pp.161-167
• /
• 2019

Impact toughness and fracture behavior were studied in five kinds of non-heat treating steels containing bainite; standard(0.25C-1.5Mn-0.5Cr-0.2Mo-0.15V), high V(0.3V), Ni(0.5Mn-2Ni), W(0.4W instead of Mo), and high C-Ni(0.35C-0.5Mn-2Ni) steels. The good hardness and impact toughness balance was exhibited in the $1100^{\circ}C$-rolled condition, while the impact toughness was deteriorated due to coarse grained microstructure in the $1200^{\circ}C$-rolled condition. The impact toughness decreased with increasing the hardness in all steels studied. The fracture behavior was also basically identical, that is, the fracture area was divided into 3 zones; shear and fibrous zone, fracture transition zone with ductile dimples and cleavage cracks, where the cracks initiate and grow to critical size, unstable cleavage fracture propagation zone. The energy absorbed for the critical crack formation through the plastic deformation inside the plastic zone in front of the notch root contributed to a mostly significant portion of the total impact energy.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4112-4119
• /
• 2023

This study employs the microshear test method to examine the local mechanical properties of narrow-gap welded joints, revealing the mechanical inhomogeneity by evaluating the microshear strength, stress-strain curves, and failure strain. On this basis, the influence of weld joints micromechanical inhomogeneity on the crack tip opening displacement (CTOD) fracture toughness is investigated. From the root weld layer to the cover weld layer, the fracture toughness at the center of the weld seam demonstrates an increasing trend, with the experimental and calculated CTOD values showing a good correspondence. The microproperties of the welded joints significantly impact the load-bearing capacity and fracture toughness. During the deformation process of the "low-matching" microregions, the plastic zone expansion is hindered by the surrounding microregion strength constraints, thus reducing the fracture toughness. In contrast, during the deformation of the "high-matching" microregions, the surrounding microregions absorb some of the loading energy, partially releasing the concentrated stress at the crack tip, which in turn increases the fracture toughness.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.5
• /
• pp.389-391
• /
• 2005

We report a case of T4 bursting fracture with paraparesis that recovered by posterior approach. A 47-year-old man presented with paraparesis (grade III) which had progressed rapidly after motor cycle accident. After sacrificing the T4 nerve root (right), posterior interbody fusion using cage following T4 corpectomy and T3-4, T4-5 discectomy was performed. After operation, lower extremities motor power improved and he could walk after one month. And this is the first report of posterior approach using cage by corpectomy and two level discectomy in case of upper thoracic burst fracture in Korea.

• Imaging Science in Dentistry
• /
• v.44 no.2
• /
• pp.89-94
• /
• 2014

Purpose: Vertical root fracture (VRF) is a common complication in endodontically treated teeth. Considering the poor prognosis of VRF, a reliable and valid detection method is necessary. Cone beam computed tomography (CBCT) has been reported to be a reliable tool for the detection of VRF; however, the presence of metallic intracanal posts can decrease the diagnostic values of CBCT systems. This study evaluated and compared the effects of intracanal stainless steel or titanium posts on the sensitivity, specificity, and accuracy of VRF detection using a NewTom VG CBCT system. Materials and Methods: Eighty extracted single-rooted teeth were selected and sectioned at the cemento-enamel junction. The roots were divided into two groups of 40. Root fracture was induced in the test group by using an Instron machine, while the control group was kept intact. Roots were randomly embedded in acrylic blocks and radiographed with the NewTom VG, both with titanium and stainless steel posts and also without posts. Sensitivity, specificity, and accuracy values were calculated as compared to the gold standard. Results: The sensitivity, specificity, and accuracy of VRF diagnosis were significantly lower in teeth with stainless steel and titanium posts than in those without posts. Interobserver agreement was the highest in teeth without posts, followed by stainless steel posts, and then titanium posts. Conclusion: Intracanal posts significantly decreased the VRF diagnostic values of CBCT. The stainless steel posts decreased the diagnostic values more than the titanium posts.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.4
• /
• pp.521-527
• /
• 2018

In dental trauma, reattachment of the original tooth fragment improves the reproduction of original tooth shape, texture, color, and radiolucency; thus, it provides good aesthetics. A 9-year-old boy was referred due to complicated crown-root fracture of the maxillary right central incisor. Although it had poor prognosis due to severe coronal damage and subcrestal fracture, reattachment of the tooth fragment was chosen due to the patient's age. One-visit apexification with mineral trioxide aggregate (MTA) was performed, followed by osteotomy and reattachment of the tooth fragment with post placement. Regular observation revealed no clinical signs or symptoms and no radiologic complications.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.1
• /
• pp.53-59
• /
• 2013

In an intra-alveolar root fracture (IARF) of a primary tooth with severe mobility and displacement, extraction and periodic-follow-up is the choice of recommended treatments because of the fear of aspiration of the mobile tooth and the possibility of damage in the permanent succeeding tooth. However, repositioning and splinting are presented as a fresh proposal recently. In case of extracting a primary incisor, many problems occur; esthetic problems; functional problems such as pronunciation and mastication; space loss; and psychological and social problems. Therefore, the best treatment is conservation of the primary tooth. The aim of this report was to suggest the conservative treatment of an Intra-alveolar root fracture of the primary central incisors with severe mobility and displacement based on two cases that describe the diagnoses, treatments and follow-ups (mean period: 27-month). All cases have been treated by reduction and immobilization by resin wire splint (RWS) (mean period: 6-week). Both cases were followed up until the successors were erupted. There have been no complications such as pain, pulp necrosis, periapical lesion, displacement of permanent tooth germ, eruption disturbance and etc.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.4
• /
• pp.537-540
• /
• 2001

Fractures of C1 are not uncommon, constituting only 10% of all cervical spine injuries. There is a high prevalence of concomitant fractures of the second and first cervical vertebral complex. Surgical treatment is controversal. Mainstay of treatment is various combination of traction and cervical orthosis according to degree of displacement and location of fracture. We experienced unusual type of fracture, anterior arch fracture of C1 who had a history of total laminectomy of C1,2 due to cervical cord tumor(neurilemmoma arising from C2 root). We performed C1,2 lateral mass screw fixation with posterior fusion with good postoperative outcome.

• Journal of Welding and Joining
• /
• v.22 no.6
• /
• pp.57-63
• /
• 2004

Fracture toughness is an important parameter in designing offshore structures to ensure resistance to fracture at various temperatures. In this study, a series of experiments is carried out to obtain fracture toughness values (CTOD) of API 2W Gr.50B, welded using FCAW(Flux Cored Arc Weld). In particular, a comparison of absorbed impact energy and CTOD values are made with respect to two different welding groove shapes; double-V-groove and double-bevel-groove. Charpy impact tests are performed for specimens sampled near the root gap, and CTOD tests are carried out for three point bending specimens having the notch at weld zone. While Charpy impact test result is determined to be a good qualitative measure of fracture toughness, no quantitative correspondence between impact absorbed energy and CTOD values was found. Based on the experiment, it is observed that double-V-groove welds give lower transition temperature than those of double-bevel-groove.

• Korean Journal of Cleft Lip And Palate
• /
• v.20 no.1
• /
• pp.49-58
• /
• 2017

We report the rehabilitation of Class II malocclusion with multiple teeth fracture due to trauma. A multidisciplinary team approach was necessary to treat patient's problems such as bone fracture, malocclusion, and multiple teeth fracture. Emergency conservative treatment, orthodontic treatment and prosthetic restoration successfully restored the occlusion. However, special considerations were needed along the orthodontic treatment process due to the unexpected complications such as ankylosis, root resorption and detection of additional teeth fractures.