• 대한구순구개열학회지
• /
• 제20권1호
• /
• pp.49-58
• /
• 2017

We report the rehabilitation of Class II malocclusion with multiple teeth fracture due to trauma. A multidisciplinary team approach was necessary to treat patient's problems such as bone fracture, malocclusion, and multiple teeth fracture. Emergency conservative treatment, orthodontic treatment and prosthetic restoration successfully restored the occlusion. However, special considerations were needed along the orthodontic treatment process due to the unexpected complications such as ankylosis, root resorption and detection of additional teeth fractures.

• 대한소아치과학회지
• /
• 제48권4호
• /
• pp.449-459
• /
• 2021

이 연구는 재생근관치료 결과에 영향을 줄 것으로 예상되는 인자를 후향적으로 분석하였다. 2011년 2월부터 2020년 1월까지 외상과 치외치 파절로 항생제 복합제제를 사용하여 재생근관치료를 시행한 54명의 환자와 57개의 치아를 대상으로 하였다. 의도적 출혈 여부, 치료원인, 치근발육단계에 따른 재생근관치료 결과를 분석하였다. 치료 결과는 증상의 개선, 치근단병소의 변화, 치근성장량을 토대로 판단하였다. 영상 촬영각도 및 위치에 의한 왜곡을 보정하기 위해 Turboreg plugin을 사용하였고, ImageJ softeware상에서 치근단공 크기, 치근면적, 치근길이의 변화를 측정하였다. 의도적 출혈 유무는 치료 결과에 유의한 영향이 없었다. 외상으로 인한 경우 치외치 파절로 인한 경우보다 치근면적과 치근길이의 증가가 적었다. 치근발육이 덜 진행된 치아일수록 치근면적의 성장이 크게 나타났다.

• The Journal of Advanced Prosthodontics
• /
• 제3권2호
• /
• pp.90-95
• /
• 2011

PURPOSE. To compare the fracture resistance and the mode of failure of endodontically treated teeth restored with different post-core systems. MATERIALS AND METHODS. Root canal treatment was performed on 40 maxillary incisors and the samples were divided into four groups of 10 each. For three experimental groups post space preparation was done and teeth were restored with cast post-core (Group B), stainless steel post with composite core (Group C) and glass fiber post with composite core using adhesive resin cement (Group D). Control group (A) samples were selected with intact coronal structure. All the samples were prepared for ideal abutment preparation. All the samples were subjected to a load of 0.5 mm/min at $130^{circ}$.until fracture occurred using the universal testing machine. The fracture resistance was measured and the data were analyzed statistically. The fracture above the embedded resin was considered to be favorable and the fracture below the level was considered as unfavorable. The statistical analysis of fracture resistance between different groups was carried out with t-test. For the mode of failure the statistical analysis was carried out by Kruskal-Wallis test and Chi-Square test. RESULTS. For experimental group Vs control group the fracture resistance values showed significant differences (P<.05). For the mode of failure the chi-square value is 16.1610, which means highly significant (P=.0009) statistically. CONCLUSION. Endodontically treated teeth without post core system showed the least fracture resistance demonstrating the need to reinforce the tooth. Stainless steel post with composite core showed the highest fracture resistance among all the experimental groups. Teeth restored with the Glass fiber post showed the most favorable fractures making them more amenable to the re-treatment.

• Journal of Welding and Joining
• /
• 제26권6호
• /
• pp.97-102
• /
• 2008

It is well known that there exist two typical fatigue crack initiation locations in ship structures: one is the weld toe and the other is the weld root where partial penetration weld is performed. In particular, it is important for fillet weldments to avoid weld root cracking in order to prevent catastrophic failure particularly in ship structures. Therefore detail considerations are required for cruciform joints with partial penetration when there is a possibility of weld root crack initiation. For these reasons, fatigue tests on welded joints were performed in this study. Concept of stress intensity factor(SIF) by means of fracture mechanics is applied for predicting fatigue life of fillet welded joints.

• 대한치과보철학회지
• /
• 제50권3호
• /
• pp.204-209
• /
• 2012

치은연 하방에 치아 우식증이나 치아 파절이 발생했을 때, 치아를 탈구시켜 즉시 정출시키는 외과적 정출술을 이용한 치관 연장술은 자연치를 보존하고 추가적인 치주적 수술 없이 단기간에 심미적인 보철 치료를 가능하게 한다. 본 환자는 16세 남환으로 본원 보존과로부터 상악 좌측 중절치의 심미 수복을 위해 본원 보철과로 의뢰되었다. 상악 좌측 중절치는 근관치료가 되어 있었으며 치관-치근 파절로 인해 협측 치관 길이는 4mm였으며 구개측 판막을 열었을 때 근심 구개측 치경부 파절 범위는 치은 하방 3-4mm에 위치하였다. 외과적 정출술을 통한 치관연장술을 시행하였으며 경과 관찰 및 임시 치아의 단계를 거쳐 3개월 후에 전부 도재관으로 수복하여 만족할 만한 임상결과를 얻을 수 있었다.

• 대한소아치과학회지
• /
• 제28권4호
• /
• pp.575-582
• /
• 2001

영구 전치부에 발생한 외상성 치은연하 파절과 자연 맹출을 기대하기 어려운 함입탈구가 발생한 경우에 여러 가지 치료방법이 알려져 있으나, 교정적 치아 정출술이 골수술을 동반한 치관길이 연장술이나 의도적 재식술에 비해 양호한 치료 성과를 나타내는 것으로 보고되고 있다. 본 증례는 외상으로 인해 치은연하로 치관파절을 보이는 환아들에서 근관치료와 함께 고정성 장치를 이용하여 치주수술을 동반한 교정적 치아 정출술을 시행한 후 복합레진 수복술로 치료하였다. 또한 치아함입이 있는 환아에서는 6개월 동안 자연 맹출을 기다린 후 맹출되지 않아 가철성 장치를 이용한 치아 정출술을 시행하여 치아를 원래의 위치로 회복시킬 수 있었는데, 이 환아의 경우 치료도중 실활의 증상을 보여 근첨성형술을 시행하였고 근첨이 형성된 후에는 근관충전을 통하여 비교적 양호한 임상적 결과를 얻을 수 있었다.

• Structural Engineering and Mechanics
• /
• 제81권5호
• /
• pp.565-574
• /
• 2022

The infrastructures such as offshore, bridges, power plant, oil and gas piping and aircraft operate in a harsh environment during their service life. Structural integrity of engineering components used in these industries is paramount for the reliability and economics of operation. Two regression models based on the concept of Gaussian process regression (GPR) and Minimax probability machine regression (MPMR) were developed to predict stress intensity factor range (𝚫K). Both GPR and MPMR are in the frame work of probability distribution. Models were developed by using the fatigue crack growth data in MATLAB by appropriately modifying the tools. Fatigue crack growth experiments were carried out on Eccentrically-loaded Single Edge notch Tension (ESE(T)) specimens made of API 5L X65 Grade steel in inert and corrosive environments (2.0% and 3.5% NaCl). The experiments were carried out under constant amplitude cyclic loading with a stress ratio of 0.1 and 5.0 Hz frequency (inert environment), 0.5 Hz frequency (corrosive environment). Crack growth rate (da/dN) and stress intensity factor range (𝚫K) values were evaluated at incremental values of loading cycle and crack length. About 70 to 75% of the data has been used for training and the remaining for validation of the models. It is observed that the predicted SIF range is in good agreement with the corresponding experimental observations. Further, the performance of the models was assessed with several statistical parameters, namely, Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Coefficient of Efficiency (E), Root Mean Square Error to Observation's Standard Deviation Ratio (RSR), Normalized Mean Bias Error (NMBE), Performance Index (ρ) and Variance Account Factor (VAF).

• 대한소아치과학회지
• /
• 제34권1호
• /
• pp.156-161
• /
• 2007

소아치과 임상에서는 외상성 손상에 의하거나 발치 도중 우발적으로 유치의 치근이 파절되는 경우가 종종 있다. 이런 경우 임상의들은 치근 파절편을 발치할지, 남겨둘지에 대해 간혹 고민하게 된다. 이같은 상황에서 잔근이나 파절편의 발치 시도가 계승치 배를 손상시킬 우려가 있을 경우에는 일반적으로 치근 파절편을 남겨두는 것이 추천되고 있다. 본 연구는 유치 잔근이나 파절편을 술자 의도적으로 잔존시킨 경우, 계승치의 맹출경로에 장애를 가하지 않고 소멸될 것인지의 예후를 확인해 볼 목적으로 잔근이나 치근 파절편을 의도적으로 남긴 3세 8개월${\sim}6$세 1개월 어린이 6명을 대상으로 $7{\sim}37$개월 동안 $2{\sim}3$개월 주기의 내원을 통하여 임상검사와 방사선검사를 시행하고 예후를 장기 관찰하였다. 관찰 결과, 5 증례에서 치근측 파절편은 생리적인 흡수과정을 통하여 크기가 축소되거나 소멸되었고, 1 증례에서는 계승치와 함께 밀려 출은하였으며 계승치의 맹출을 현저하게 지장을 초래한 경우는 나타나지 않았다. 본 관찰을 통하여 치조골 내에 남은 유치근 파절편이 계승치배에 근접한 경우, 이를 무리하게 발치하려 시도하기보다는 치배의 손상 가능성을 고려하여 잔존시키고 주기적인 검진을 통해 흡수 여부를 판단하며 예후 관리를 하는 방법의 타당성을 확인할 수 있었다.

• The Journal of Advanced Prosthodontics
• /
• 제8권2호
• /
• pp.158-166
• /
• 2016

PURPOSE. The aim of this study was to determine the fracture resistance and the mode of fracture of endodontically treated teeth restored with different fiber posts and all-ceramic crowns. MATERIALS AND METHODS. Two glass fiber reinforced post systems in two different sizes and polyethylene fiber ribbon in two different thicknesses (n=10) were used. The specimens, restored with all-ceramic crowns, were subjected to a compressive load (in N) delivered at a 130-degree angle to the long axis until a fracture could be noted. The results were analyzed statistically with a One-Way ANOVA test (P<.05). RESULTS. Statistically significant differences were observed between the mean fracture resistance values of Postec, Snowlight, and Kerr Connect thin specimens (P<.0095). The Postec results (395.70 N) were found to be significantly higher than the others. No statistical difference was observed among the thick specimens (P<.2657). The mean fracture resistance values of the Snowlight thick samples were found to be higher than those of the Snowlight thin samples. The specimens were always fractured around the cemento-enamel junction at the palatinal side. No post fracture was observed for the thin Snowlight and Kerr Connect specimens or for the thick Postec and Kerr Connect specimens. Among the common failure types of the specimens, the worst was observed to be the root fracture failure. The highest post dislodgement failure result (80%) was obtained from the thin Kerr Connect specimen. CONCLUSION. In terms of optimizing fracture resistance, the fiber post size selection should be done according to the forces applied to the restored teeth.

• Restorative Dentistry and Endodontics
• /
• 제45권4호
• /
• pp.53.1-53.11
• /
• 2020

Objectives: This study investigated the incidence of root dentin defects after the use of different post space preparation (PSP) drills. Materials and Methods: Seventy-two bovine incisors were selected and obtained 14-mm-long root sections. Twelve roots served as controls with no intervention (G1). The 60 root canals remaining were instrumented using the crown-down technique with the ProTaper Next system and obturated using the lateral condensation technique. Specimens were randomly distributed into 5 groups (n = 12) according to the operative steps performed: G2, root canal instrumentation and filling (I+F); G3, I+F and PSP with Gates-Glidden drills; G4, I+FI+F and PSP with Largo-Peeso reamers; G5, I+F and PSP with Exacto drill; and G6, I+F and PSP with WhitePost drill. Roots were sectioned at 3, 6, 9, and 12 mm from the apex, and digital images were captured. The presence of root dentin defects was recorded. Data were analyzed by the χ² test, with p < 0.05 considered to indicate statistical significance. Results: Root dentin defects were observed in 39.6% of the root sections. No defects were observed in G1. G5 had significantly more cracks and craze lines than G1, G2, and G3 (p < 0.05), and more fractures than G1, G2, G3, and G4 (p < 0.05). When all root sections were analyzed together, significantly more defects were observed at the 12-mm level than at the 3-mm level (p < 0.05). Conclusions: PSP drills caused defects in the root dentin. Gates-Glidden drills caused fewer root defects than Largo-Peeso reamers and Exacto drills.