• Restorative Dentistry and Endodontics
• /
• v.34 no.6
• /
• pp.484-490
• /
• 2009

The purpose of this study was to evaluate the effect of soft chelating irrigant on the sealing ability of root fillings by using a glucose leakage test. A total of 45 single-rooted teeth were selected for the study. The teeth were decoronated leaving a total length of 13mm. The root canals prepared using K3 NiTi rotary instruments to an apical dimension of size 45(0.06 taper). The specimens were then randomly divided into 3 experimental groups of 13 roots each and 2 control groups of 3 roots each. Specimen in each group were prepared with different irrigation protocols : group 1, 2.5% NaOCl; group 2, 2.5% NaOCl and 17% EDTA: group 3, 2.5% NaOCl and 15% HEBP. The root canals were filled with gutta-percha and AH Plus sealer using lateral condensation. After 7 days in $37^{\circ}C$, 100% humidity, the coronal-to-apical microleakage was evaluated quantitatively using a glucose leakage model. The leaked glucose concentration was measured with spectrophotometry at 1, 4, 7, 14, 21 and 28 days. There was a tendency of increase in leakage in all experimental groups during experimental period. HEBP-treated dentin showed no significant difference with EDTA-treated dentin during experimental period. From the 21th day onward, HEBP-treated dentin showed significantly lower leakage than smear-covered dentin. HEBP-treated dentin displayed a similar sealing pattern to EDTA-treated dentin and a better sealing ability than smear-covered dentin. Consequently, a soft chelator(HEBP) could be considered as the possible alternative to EDTA.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.459-473
• /
• 2000

Dental caries is the most common disease in the maxillofacial area. There are many factors contributing to its development, but complete understanding and prevention is not fully known. Since the structure of the coronal and root portion of the tooth is different, the remineralization and demineralization process is also known to be different. In this study, by using a partially saturated buffer solution, we created artificial enamel and dentin caries and evaluated mineral loss. A remineralization solution with four different degrees of saturation (degree of saturation ; group 1, 0.268, group 2, 0.309, group 3, 0.339, group 4, 0.390, PH 4.3, F-2ppm) was used on a demineralized specimen. The mineral precipitating quantity and depth was evaluated by using microradiography. Using an atomic force microscope (AFM), hydroxyapatite crystals of normal, demineralized, and remineralized enamel and dentin were evaluated. The results were as follows: 1. As the degree of saturation of the remineralizing solution increased, the mineral precipitation in the enamel was increased. In group 4, mineral precipitation was limited near the surface. 2. As the degree of saturation of the remineralizing solution increased, the mineral precipitation in the dentin was decreased and it occurred in a deeper portion. In group 4, however, mineral precipitation occurred on the surface and its quantity increased. 3. There was a statistically significant interaction between enamel and dentin mineral content changes on specimens treated with remineralization and demineralization solution (demineralization r=0.44, remineralization r=0.44, p<0.05). 4. Demineralized hydroxyapatite crystals showed central and peripheral dissolving and widening of intercrystal spaces under the AFM. 5. In dentin remineralization small crystal precipitation occurred between the large crystals. We conclude that by adjusting acidulated buffer solution's degree of saturation, we can control enamel and dentin remineralization. In addition, the AFM is highly useful in evaluating changes in remineralized and demineralized hydroxyapatite crystals.

• Restorative Dentistry and Endodontics
• /
• v.46 no.4
• /
• pp.53.1-53.11
• /
• 2021

Objectives: This study evaluates the bond strength and marginal adaptation of mineral trioxide aggregate (MTA) Repair HP and Biodentine used as apical plugs; MTA was used as reference material for comparison. Materials and Methods: A total of 30 single-rooted teeth with standardized, artificially created open apices were randomly divided into 3 groups (n = 10 per group), according to the material used to form 6-mm-thick apical plugs: group 1 (MTA Repair HP); group 2 (Biodentine); and group 3 (white MTA). Subsequently, the specimens were transversely sectioned to obtain 2 (cervical and apical) 2.5-mm-thick slices per root. Epoxy resin replicas were observed under a scanning electron microscope to measure the gap size at the material/dentin interface (the largest and smaller gaps were recorded for each replica). The bond strength of the investigated materials to dentin was determined using the push-out test. The variable bond strengths and gap sizes were evaluated independently at the apical and cervical root dentin slices. Data were analyzed using descriptive and analytic statistics. Results: The comparison between the groups regarding the variables' bond strengths and gap sizes showed no statistical difference (p > 0.05) except for a single difference in the smallest gap at the cervical root dentin slice, which was higher in group 3 than in group 1 (p < 0.05). Conclusions: The bond strength and marginal adaptation to root canal walls of MTA HP and Biodentine cement were comparable to white MTA.

• Journal of Periodontal and Implant Science
• /
• v.25 no.1
• /
• pp.76-88
• /
• 1995

The purpose of this was to evaluate the in vitro effects of different application modes of tetracycline HCI on dentin root surfaces. The study group was comprised of 30 teeth with advanced periodontal disease extracted before the start of periodontal therapy. The diseased root surface was vigorously root planed to expose dentin. The teeth were sectioned and cotton pellets. soaked in a saturated solution of tetracycline HCI, were either "placed" or "burnished" on the prepared root surface for 3, 5 min. respectively. Control surfaces were similarly treated with root planing only. Following the various treatments, teeth were fixed. dehydrated, critical point dried, and coated for scanning electron microscopic(SEM) evaluation. The surfaces of tetracycline HCI treated specimens considerably differed from specimens treated with root planing only. Results demonstrated that root-planed, no-tetracycline HCI specimens had amorphous, irregular surface which corresponded to a smear layer. Tetracycline HCI specimens exhibited collagen fibers and dentinal tubules exposed by the removal of the smear layer. Although some differences were seen in surface structures among some specimens. "burnished" application causes more extensive change than "placed" application, and application time of the tetracycline HCl did not seem to have any major impact on the surface morphology.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.59-62
• /
• 2011

The demineralizing effect of chelating agents(Maleic acid solution, EDTA salts solutions; disodium-, trisodium- and tetrasodium-EDTA) on hydroxyapatite(HA) for the root canal dentin treatment was investigated. Dissolution of Ca from HA was increased with increasing immersion time in chelating solutions. Among the EDTA salts solutions, tetrasodium-EDTA was least effective in dissolving Ca out from HA, and trisodium-EDTA was the most effective. Trisodium-EDTA solutionmight be more effective in removing the smear layer compared to tetrasodium-EDTA solution.

• Restorative Dentistry and Endodontics
• /
• v.44 no.1
• /
• pp.5.1-5.9
• /
• 2019

Objectives: The aim of this in vitro study was to evaluate the push-out bond strength of a novel calcium silicate-based root repair material-BIOfactor MTA to root canal dentin in comparison with white MTA-Angelus (Angelus) and Biodentine (Septodont). Materials and Methods: The coronal parts of 12 central incisors were removed and the roots were embedded in acrylic resin blocks. Midroot dentin of each sample was horizontally sectioned into 1.1 mm slices and 3 slices were obtained from each root. Three canal-like standardized holes having 1 mm in diameter were created parallel to the root canal on each dentin slice with a diamond bur. The holes were filled with MTA-Angelus, Biodentine, or BIOfactor MTA. Wet gauze was placed over the specimens and samples were stored in an incubator at $37^{\circ}C$ for 7 days to allow complete setting. Then samples were subjected to the push-out test method using a universal test machine with the loading speed of 1 mm/min. Data was statistically analyzed using Friedman test and post hoc Wilcoxon signed rank test with Bonferroni correction. Results: There were no significant differences among the push-out bond strength values of MTA-Angelus, Biodentine, and BIOfactor MTA (p > 0.017). Most of the specimens exhibited cohesive failure in all groups, with the highest rate found in Biodentine group. Conclusions: Based on the results of this study, MTA-Angelus, Biodentine, and BIOfactor MTA showed similar resistances to the push-out testing.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.111-131
• /
• 1997

Eighty two of extracted bovine mandibular incisors were sectioned transversely through the cementoenamel junction(CEJ) and instrumented to a size minimum-# 110 file at the working length by 5.25 % NaOCl irrigation. The roots in group 1 were received a final irrigation with 10ml of 17% EDTA followed by 10ml of 5.25% NaOCl, group 2, 10ml of 40% citric acid followed by 10ml of 5.25% NaOCl, group 3, 20ml of 5.25% NaOCl, and control group, 20ml distilled water. Canal walls of four roots in each group and control group were examined by SEM(x3000). Calcium hydroxide was placed into all experimental roots except control group. Each root was placed in nalgen bottle containing unbuffered distilled water. The pH level of the medium surrounding tooth was recorded at 0, one hour, and daily for 1week, then 14days, 21days, and 28days using pH electrode. At 1, 3, 7, 14, 21days, and 28days, four roots from each group were split longitudinally and the ratio change was recorded using spectroiluorometer. The results were followings : 1. The smear layer was totally removed from canal walls in group 1 and 2, but was observed in group 3 and control group. 2. The hydroxyl ion diffused more rapidly through radicular dentin when smear layer was removed from canal walls. 3. The hydroxyl ion derived from calcium hydroxide began to diffuse from the root canal to the exterior surface of the root at 1day, and continued to 1-2weeks. 4. The pH level of dentin near the CEJ was not different in all experimental group regardless of presence of smear layer. It is clinically advisable to place calcium hydroxide into root canal for 1-2weeks for the purpose of expectation of diffusion of hydroxyl ion. But, after the placement of calcium hydroxide into root canal, the consequent pH level of external root surface will be futher studied with respect to it's effect on the root and periodontium.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.187-201
• /
• 1996

The purpose of this study was to evaluate the sealing ability of a calcium hydroxide plug treated with a bonding agent. Ninety extracted human anterior teeth and premolars with single canal were used in this study. Crowns were removed. the canal's were instrumented. and the roots were randomly divided into three groups of 30 each. In control group. a single apical seat was prepared with #60 K file 1mm short of the apex and the root canal was obturated with Gutta-percha and Sealapex by the lateral condensation method. In experimental group 1 and group 2. to prepare an apical isthmus of 1mm in length. the first apical seat was prepared with a #45 K file 1mm short of the anatomical apex and with a #60 K file 2mm short for the second apical seat. Dry calcium hydroxide powders were packed in the apical isthmus with a hand plugger and #60 K file and then. the root canal was obturated with Gutta-percha and Seal apex by the lateral condensation method. In experimental group 2. following an application of the bonding agent to the plug. the root canal was obturated in the same way. The teeth of each group were immersed in a 2% methylene blue dye solution. for 1, 2, and 4 weeks. The distance from the tip of the cone to the deepest penetration was measured using the Tool maker's microscope. The results were as follows : 1. The teeth having the calcium hydroxide plug treated with the dentin bonding agent (experimental group 2) showed the lowest leakage with 1.4705mm and the control group without apical plug(no apical isthmus) showed the highest leakage with 3.1735mm. 2. The control group without apical plug showed higher leakage than experimental group 1 having the calcium hydroxide plug treated without the dentin bonding agent(p>0.05). 3. The control group without apical plug and experimental group 1, having the calcium hydroxide plug treated without the dentin bonding agent. showed higher leakage than experimental group 2. having the calcium hydroxide plug treated with the dentin bonding agent(p<0.001). 4. The immersion time had no significant effect on the degree of leakage. In conclusion, the results showed that the calcium hydroxide plug treated with the dentin bonding agent could decrease the microleakage from the root apex effectively.

• Restorative Dentistry and Endodontics
• /
• v.30 no.1
• /
• pp.7-15
• /
• 2005

The purpose of this study was to compare the sealing ability of root canal obturation with or without the use of dentin adhesive system. Forty extracted human teeth with one canal were selected and decoronated. The teeth were divided into two Groups. The obturation procedure of Group 1 was the same as that of Group 2 with the exception of dentin adhesive system. Group 2 were obturated with dentin adhesive system, AH-26, and gutta-percha. After obturation, the teeth were immersed in methylene blue solution for 84 hours. The teeth were sectioned horizontally at 1.5 mm (Level 1), 2.0 mm (Level 2) 2.5 mm (Level 3) from the root apex using a low speed microtome. Distance of dye-penetrated surface and total dentinal surface were measured using SigmaScan Pro 5.0, and the ratio of dye-penetrated distance to the total dentinal distance was analyzed statistically by Mann-Whitney U-test. 1. In both groups, the mean leakage ratio was decreased cervically. 2. At level 1, there was no significant difference between group 1 and group 2 (p > 0.05). 3. At level 2 and 3, group 1 showed significantly higher mean leakage ratio than group 2 (p < 0.05). The results suggest that using dentin adhesive system in root canal obturation procedure reduces the apical microleakage.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.267-279
• /
• 1996

Microorganisms are implicated the endodontic treatment failures. Persistent endodontic infection may be the result of retention of microorganisms in the dentin of the root canal walls. Dentinal tubules of the root canal walls have been shown to harbor microorganisms. The purpose of this study was to investigate the invasion of microorganism into the root dentin and dentinal tubules. The effects of irrigation solutions and smear layer on bacterial colonization of root canal were evaluated using a scanning electron microscopy. Canals of extracted human teeth with single and straight canals were stepback prepared using normal saline. Tooth samples were divided into four groups according to the irrigation solutions -5 % sodium hypochlorite and normal saline-and smear layer treatment. The smear layer was removed by 5% NaOCl and 20% EDTA for 10 min respectively. After sterilization, they were incubated with each strains of Streptococcus sanguis, Enterococcus faecalis, Staphylococcus aureus and Escherichia coli. Sodium hypochlorite solution reduced the adhesion of microorganisms effectively compared to normal saline. The smear layer inhibited colonization of E. faecalis, S. aureus and E. coli in the root canals due to their blocking of dentianl tubules. But S. sanguis invaded dentinal tubules in the root canals without smear layer. It was suggested that bacterial attachment might be different according to the strains. Sodium hypochlorite inhibited bacterial attachment in the dentinal tubules dramatically. The absence or presence of smear layer affected bacterial invasion of the dentinal tubules.