• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.323-328
• /
• 2006

Dentinogenesis imperfecta is an inheritable disease of dentinal defect, generally is inherited as a single autosomal dominant trait. It has a prevalence of 1 in 8000 with the trait, and no significant difference between male and female, with involvement of the primary and permanent teeth. Shields proposed three types of Dentinogenesis imperfecta. Affected teeth have various discoloration, separation of enamel rapid destruction of underlying dentin, and severe attrition. Radiographically, the teeth have cervical constriction, bulbous crown, thin root, obliteration of the root canals and pulp chambers, and periapical lesions in a sound tooth. The objective of treatment is rehabilitation of the esthetics, the masticatory function, and the vertical dimension of occlusion. In these cases, two pediatric patients reported to the Kyungpook University Pediatric clinic, with a chief complaint of discolored teeth and severe attrition. As a result of clinical and radiographic exam, it was diagnosed as Dentinogenesis imperfecta. The posterior teeth were restored with Stainless Steel Crown, and the anterior teeth were restored with composite resin veneering.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.700-708
• /
• 2001

Traumatic injuries in young patients can result in the interruption of the development of the incompletely formed roots. In teeth with incomplete root-end formation and necrotic pulps, the root canals must be completely debrided. Because of a lack of an apical stop and the presence of thin and fragile walls in these teeth, it is imperative to perform apexification to obtain an adequate apical seal. Calcium hydroxide has become the material of choice for apexification. Despite its popularity for the apexification procedure, calcium hydroxide therapy has some inherent disadvantages that include variablility of treatment time, unpredictability of apical closure, difficulty in patient follow-up, and delayed treatment. An alternative treatment to long-term apexification procedure is the use of an artificial apical barrier that allows immediate obturation of the canal. MTA(Mineral Trioxide Aggregate) is a powder consisting of fine hydrophilic particles of tricalcium silicate, tricalcium aluminate, tricalcium oxide and silicate oxide. MTA has a pH of 12.5 after setting, similar to calcium hydroxide. This may impart some antimicrobial properties. MTA has low solubility and a radiopacity slightly eater than that of dentin. Also, MTA leaked significantly less than other materials and induced hard-tissue formation more than other materials.

• Restorative Dentistry and Endodontics
• /
• v.33 no.2
• /
• pp.98-106
• /
• 2008

The purpose of this study was to evaluate whether intracanal irrigation method could affect the adhesion between intracanal dentin and root canal filling materials (Gutta-percha/AH 26 sealer and Resilon/Epiphany sealer). Thirty extracted human incisor teeth were prepared. Canals were irrigated with three different irrigation methods as a final rinse and obturated with two different canal filling materials (G groups: Gutta-percha/AH 26 sealer, R groups: Resilon/Epiphany sealer) respectively. Group G1, R1-irrigated with 5.25% NaOCl Group G2, R2-irrigated with 5.25% NaOCl, sterile saline Group G3, R3-irrigated with 5.25% NaOCl, 17% EDTA, sterile saline Thirty obturated roots were horizontally sliced and push-out bond strength test was performed in the universal testing machine. After test, the failure patterns of the specimens were observed using Image-analyzing microscope. The results were as follows. 1. Gutta-percha/AH 26 sealer groups had significantly higher push-out bond strength compared with the Resilon/Epiphany sealer groups (p < 0.05). 2. Push-out bond strength was higher when using 17% EDTA followed by sterile saline than using NaOCl as a final irrigation solution in the Resilon/Epiphany sealer groups (p < 0.05). 3. In the failure pattern analysis, there was no cohesive failure in Group G1, G2, and R1. Gutta-percha/AH 26 sealer groups appeared to exhibit predominantly adhesive and mixed failure patterns, whereas Resilon/Epiphany sealer groups exhibited mixed failures with the cohesive failure occurred within the Resilon substrate.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.1
• /
• pp.129-150
• /
• 1993

Since the restoration or masticatory function is the most important aim of implants, it should be substituted for the role of natural teeth and deliver the stress to the bone under the continous load during function. In natural teeth, stress distribution can be obtained through enamel, dentin and cementum and the elasticity of the periodontal ligament play a role of buffering action. In contrast, implant prosthesis has a very unique characteristics that it delvers the load directly to bone through the implant and superstructure. This fact arise the needs to evaluate the stress distribution of the implant in the mechnical aspects, which has a similar role of natural teeth but different pathway of stress. With 3 kinds of implant in prevalent use, 2 types of experimental PEA implant models were made, axisymmetric and 2-dimensional type. In axisymmetric model, the stiffness of the part including the prosthesis and implant which extrude out of bony surface could be calculated with displacement of the superstructure un er 100N vertical load and then damping effects could be determined through this stiffness. In axisymmetric FEA model, load to the bone could be deduced by evaluation the stress distribution of the designed surface under the 100N vertical force and in 2-dimensional model, 100N eccentric vertical load and 20N horizontal loda. The result are as follows. 1. In every implant, stress to the bone tends to be concenturated on the cortical bone. 2. Though the stress of the cancellous bone is larger at the apex of implants, it is less compared with cortical bone. 3. Under 20N horizontal load, stress of the left and right sides of implant shows a symmetrical pattern. But under 100N eccentric vertical load, loaded side shows much larger stress value. 4. In the 1mm interface, stress distribution among implants tend to have a similar pattern. But under 20N horizontal load apposite side of being loaded shows less stress in IMZ. 5. In the case of screw type implant, stress tends to vary along with screw shape. 6. According to the result determined with microstrain, cancellous bone id generally under the condition of overload, while cortical bone is usually within the limitation of physiologic load. 7. In the Branemark implant, maximum stress to the cortical bone is larger than any other implant except for the condition of 20N horizontal force and 0.05mm interface. 8. Damping effects of implants is maximum in IMZ.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.651-657
• /
• 2007

Odontomas are the common type of odontogenic tumors and generally are asymptomatic and frequently lead to impaction or delayed eruption of permanent teeth. They are composed of enamel, dentin, cementum and pulp tissue and are divided into compound and complex according to the morphology of the hard tissues. Compound odontomas consist of varying numbers of small toothlike structure and have a predilection for the maxillary anterior regions. Complex odontomas consist of an unorganized mass of odontogenic tissues and comprise approximately 25 percent of all odontomas and have a predilection for the mandibular posterior regions. The etiology of odontomas is uncertain but hypothesized to involve local trauma, infection and genetic factors. Treatment of odontoma is conservative surgical removal and are little probability of recurrence. These two cases were about the patients with delayed eruption of mandibular first molar and mandibular lateral incisor. We surgically removed odontoma, exposed impacted tooth and guided impacted tooth into normal position by orthodontic traction. At the completion of traction, the mandibular first molar and mandibular lateral incisor was positioned fairly within the arch and complications such as root resorption were not observed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.175-179
• /
• 2001

Regional odontodysplasia is a relatively rare condition in which both enamel and dentin are hypoplastic and hypocalcified. The result is localized arrest in tooth development. The etiology of regional odontodysplasia is uncertain, but, disturbance in vascular supply, somatic mutation, latent virus infection, trauma, hyperpyrexia, irradiation, nutrition, metabolic disorders and hereditary transmission are supported to be etiologic factors. Females are more often affected than males. (1.4 : 1). The maxillary arch is more often affected than the mandibular arch with the maxillary left quadrant being the most commonly involved. Affected teeth are hypoplastic, typically discolored yellow or yellowish brown, smaller in size and display a variety of surface marking including pitting and grooving. Radiographically, the teeth affected have been described to have a "ghost like" appearance or "fuzzy" appearance. Pulp calcification and denticles may be present within the pulp chambers of the affected teeth. In it's case, a 2 years old male visited for a treatment of uneruption of lower right teeth. Partial eruption of lower right deciduous central incisor and unerupted deciduous lateral incisor, deciduous canine and deciduous first molar showed severly delayed eruption state. On radiographic appearance, "Ghost like appearance", shortened root and opened apexes on lower right region were observed. It was suspected regional odontodysplasia with clinical and radiographic condition.

• Restorative Dentistry and Endodontics
• /
• v.35 no.4
• /
• pp.257-266
• /
• 2010

The purpose of this study was to determine the effect of post types and sizes on fracture resistance in immature tooth model with various restorative techniques. Bovine incisors were sectioned 8 mm above and 12 mm below the cementoenamel junction to simulate immature tooth model. To compare various post-and-core restorations, canals were restored with gutta-percha and resin core, or reinforced dentin wall with dual-cured resin composite, followed by placement of D.T. LIGHT-POST, ParaPost XT, and various sizes of EverStick Post individually. All of specimens were stored in the distilled water for 72 hours and underwent 6,000 thermal cycles. After simulation of periodontal ligament structure with polyether impression material, compressive load was applied at 45 degrees to the long axis of the specimen until fracture was occurred. Experimental groups reinforced with post and composite resin were shown significantly higher fracture strength than gutta-percha group without post placement (p < 0.05). Most specimens fractured limited to cervical third of roots. Post types did not influence on fracture resistance and fracture level significantly when cement space was filled with dual-cured resin composite. In addition, no statistically significant differences were seen between customized and standardized glass fiber posts, which cement spaces were filled with resin cement or composite resin individually. Therefore, root reinforcement procedures as above in immature teeth improved fracture resistance regardless of post types and sizes.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.4
• /
• pp.283-292
• /
• 2007

Two-step or one-step bonding systems generally inhibit curing process of dual-cured core build-up resin composite for their adhesive acidity. In addition this dual-cured core build-up resin composite can be applied to dentin of pulp chamber and root at the time that complete the endodontic treatment. The purpose of this investigation was to determine the influence of sodium hypochlorite on rnicrotensile bond strength of dual-cured core build-up resin composite. Extracted human molars were horizontally sectioned with 1mm thickness using low speed diamond saw. After the sectioned specimens were divided into 8 groups, adhesive systems (Clearfil SE-Bond, Prime&Bond NT[2-step, 1-step], Adper Prompt L-Pop) were then applied with or without sodium hypochlorite pretreatment. The treated specimen was filled with dual-cured core build-up resin composite (Luxacore, DMG corp., German). Then light cured for 40 seconds and soaked in $37^{\circ}C$ water bath for 24 hours. After the treated specimen was grinded with 1mm width and measured rnicrotensile bond strength by testing machine. Additionally 8 teeth were prepared for SEM evaluation. The results were as follows. : NaOCl treated groups generally had lower rnicrotensile bond strength but did not show any difference statistically except Adper Prompt L-Pop. When the teeth were treated by NaOCl, though the difference of applied adhesive system, it had no statistically significant difference within the NaOCl treated groups except the relation of between ClearFil SE-Bond adhesive system and Adper Prompt L-Pop adhesive system. In the SEM evaluation, NaOCl treated groups presented relatively long resin tags and incomplete hybrid layer formation generally.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.350-359
• /
• 2001

목적 - 근관형성시 근관내 상아질벽에는 항상 도말층(smear layer)이 형성되는데, 이는 상아질, 치수조직 잔사, 조상아세포 돌기, 때로는 미생물 등으로 구성되며, 주사전자현미경상으로는 비규칙적이며, 무정형의 구상(granular)구조물로 관찰된다. 본 연구에서는 도말층의 유무에 따른 혐기성 미생물, Prevotella nigrescens의 근관내 상아질 부착정도를 주사전자현미경으로 평가하고자 한다. 지금까지 사용되었던 실험방법에 비하여 보다 임상적 환경에 가까운 실험방법을 고안, 신빙성 있는 연구결과를 기대할 수 있도록 하였다. 방법 - 치주질환이나 외상 등의 원인으로 발거된 상, 하악 전치 18개를 사용하였다. 각 치아의 치관부를 백악법랑경계부위에서 절단하고, 1군(5개치아)은 10ml의 생리식 염수를, 2군(5개치아)과 3군(5개치아)은 10ml의 3.5% NaOCl을 근관관주용액으로 사용하여 근관형성을 하였다. 근관형성 완료후 1군과 2군은 10ml의 생리식염수로, 3군은 10ml의 0.5M EDTA용액으로 final flush를 시행하여, 3군의 도말층을 제거하였다. 치근수직절단과 ethylene oxide(EO) gas 소독후 1, 2, 3군의 시편(각군10개시편)을 Prevotella nigrescens가 부유된 Brain Heart Infusion with Yeast estract, Hemin and Menadione(BHIYHM) broth내에 37$^{\circ}C$에서 3시간 동안 incubation했다. 4, 5, 6군은 실험과정을 검증하기 위한 대조군으로써, 4군(1개치아)과 5군(1개치아)은 1군, 2군과 같이 각각 생리식염수와 NaOCl만을 이용한 근관형성으로 도말층을 잔존시키고, 6군(1개치아)은 3군과 같이 NaOCl과 EDTA를 적용하여 도말층을 제거한 후, 치근 수직절단과 EO gas 소독을 시행했다. 모든 시편(1, 2, 3, 4, 5, 6군)을 통상의 방법에 따라 처리한 후 주사전자현미경을 통하여 관찰, 근관내면에 부착되어 있는 Prevotella nigrescens의 개수, 모양, 상아세관 및 도말층과의 관계 등을 관찰, 비교, 분석하였다. 결과는 t-test와 one-way ANOVA를 통하여 통계처리 하였다. 결론 - 1. 근관형성 후 근관내 상아질 표면 전체는 도말층으로 덮여 있는 양상을 보였다. 2. 3.5% NaOCl과 0.5M EDTA를 적용하여 근관내 도말층을 효과적으로 제거할 수 있었으며, 상아세관 개구부가 확연히 노출되어 있는 소견을 관찰할 수 있었다. 3. 도말층이 덮인군에서 미생물의 부착이 유의성 있게 높았다(P<0.05). 4. 근관 형성중 형성되어 근관 상아질을 덮고 있는 도말층이 미생물의 부착을 증가시켜, 근관 재감염의 기회를 증가시킴을 알 수 있었다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.651-658
• /
• 2004

Runx2 is a transcription factor in homologous with Drosophila runt gene and it is essential for bone formation during embryogenesis and a critical gene for osteoblast differentiation and osteoblast function. Runx2-haploinsufficency causes cleidocranial dysplasia (CCD). CCD is an autosomal-dominant inherited disorder characterized by hypoplastic clevicle and delayed ossification in fontanelles and wormian bones. Dental defects are possibly shown to CCD patients : multiple supernumerary teeth, irregular and compressed permanent tooth crowns, hypoplastic and hypomineralized defects in enamel and dentin, an excess of epithelial root remnants, the absence of cellular cementum, and abnormally shaped roots. In addition, delayed eruption of the secondary dentition is a constant finding. The aim of this study is to evaluate the role of Runx2 in the tooth development and eruption through analyzing the expression pattern of Runx2 by in situ hybridization during crown (late bell stage) and root formation of tooth, using postnatal day 1, 4, 7, 14 and 21 mice mandibular molar teeth. mRNA of Runx2-full length is expressed in dental follicle and surrounding tissue at postnatal day1 and 4. At postnatal day 7, it is expressed in ameloblasts of occlusal surface of enamel and bone area surrounding the tooth. In comparison with previous stage, at postnatal day 14, it is expressed in ameloblasts of proximal surface of enamel. At postnatal day 21 it's expression is observed only in bone area. mRNA of Runx2-typeII is not expressed. At postnatal day 1 and 7. At postnatal day 14 and 21, it's expression is observed in the bone area. In this study, we suggest that Runx2 have a relation of ameloblasts differentiation and an important role to tooth eruption made by dental follicle during intraosseous eruption stage. Also we can confirm that Runx2 has a role to bone formation.