• International Journal of Korean Welding Society
• /
• v.3 no.2
• /
• pp.15-23
• /
• 2003

A genetic algorithm was applied to an arc welding process to determine near optimal settings of welding process parameters which produce good weld quality. This method searches for optimal settings of welding parameters through systematic experiments without a model between input and output variables. It has an advantage of being able to find optimal conditions with a fewer number of experiments than conventional full factorial design. A genetic algorithm was applied to optimization of weld bead geometry. In the optimization problem, the input variables were wire feed rate, welding voltage, and welding speed, root opening and the output variables were bead height, bead width, penetration and back bead width. The number of level for each input variable is 8, 16, 8 and 3, respectively. Therefore, according to the conventional full factorial design, in order to find the optimal welding conditions, 3,072 experiments must be performed. The genetic algorithm, however, found the near optimal welding conditions from less than 48 experiments.

• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.161-164
• /
• 1994

Computer aided unloading elastic compliance method was employed to measure the closure and the length of short cracks. The most significant factor that influences the fatigue growth behavior of short cracks is the crack closure Phenomenon. dc/dN-$\Delta$ $K_{eff}$ relationships of short cracks are found to coincide well with the corresponding long crack relationships. Non-propagating behavior of short cracks at notch root can be predicted from the crack opening SIF of short cracks, $K_{op}$ , and the growth equation of long cracks in Region I and II.n Region I and II.I.

• Restorative Dentistry and Endodontics
• /
• v.30 no.6
• /
• pp.461-469
• /
• 2005

The aim of this study was to compare the root canal systems of maxillary and mandibular premolars that had a single root using radiographs and clearing samples. 142 single rooted premolars were selected and mesio-distal and bucco-lingual views were radiographed using intra-oral dental standard films. Four equally trained examiners classify the root canal types from the developed radiographs. After opening the tooth for access, it was stored in $5\%$ NaOCl to dissolve the pulp tissue. Indian ink was then injected into the pulp cavity to stain the pulp tissue. It was cleared in methyl salicylate after being decalcified with $5\%$ nitric acid for 48 hours, and the root canal type was evaluated at a magnification of $\times$ 20 using a stereomicroscope. The results are as follows ; There were statistically significant differences between the radiographs and clearing samples of the root canal types among examiners (p < 0.05). There might be differences in the root canal types among examiners when the same radiograph is used. Therefore, considering the difficulty in estimating the root canal types, clinicians need to be careful when interpreting radiographs before root canal therapy.

• Journal of Environmental Science International
• /
• v.25 no.12
• /
• pp.1689-1699
• /
• 2016

The growth conditions of planted trees, invasion of nuisance herbaceous species, competition between species, and effects of erosion control were monitored over five years in a riparian greenspace in Gapyeong County that was established through multilayered and grouped ecological planting. Of 156 trees planted in the upper and middle layers, 5.8% died. This tree death was attributed to poor drainage or aeration in the rooting zone from the clay-added root ball and too deep planting as well as a small-sized root ball and scanty fine roots. Of all the trees, 21.6% grew poorly due to transplant stress in the first year after planting, but they started to grow vigorously in the third year. This good growth was largely associated with soil improvement before planting, selection of appropriate tree species based on growth ground, and control of dryness and invasive climbing plants through surface mulching and multilayered/grouped planting. Mixed planting of fast-growing species as temporary trees was desirable for accelerating planting effect and increasing planting density. Thinning of fast-growing trees was required in the fifth year after planting to avoid considerable competition with target species. To reduce the invasion of herbaceous and climbing plants that oppress normal growth of planted trees, higher density planting of trees (crown opening of about 15%), woodchip mulching to a 10-cm depth, and edge planting 2 m wide were more effective than lower density planting (crown opening of 70%), no surface mulching, and no edge planting, respectively. This reduction effect was especially great during the first three years after planting. Nuisance herbaceous plants rarely invaded higher density planting with woodchip mulching over the five years. Higher density planting or woodchip mulching also showed much greater erosion control through rainfall interception and buffering than lower density planting with no mulching did. Based on these results, desirable planting and management strategies are suggested to improve the functions of riparian greenspaces.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.335-342
• /
• 2007

C-shaped canals are known to present a complex canal anatomy with numerous fins connecting individual canals, thus requiring supplementary effort to accomplish a successful root canal treatment. This study examined the frequency of the C-shaped mandibular second molars and interrelation between the clinical records and radiographs to recognize them treated in the Department of Conservative Dentistry of the Chosun University Dental Hospital during a six-year period (1998-2004). This study reviewed the clinical records of 227 patients who underwent root canal treatment of the mandibular second molars. After opening the chamber, those cases with C-shaped orifices in the pulpal floor were selected, ana the C-shaped root canal types were classified according to Melton's criteria. Three experienced dentists evaluated the radiographs of the C-shaped mandibular second molar on a viewer using a magnifying glass in order to determine if the root apex was fused or separated, the distal root canal was either centered or mesial shifted in the distal root, and if there was bilateral symmetry in a panorama. In conclusion, there is a high frequency of C-shaped mandibular second molars in Koreans. Simultaneous interpretation of the root shape and distal root canal using the preoperative, working length and post-treatment radiographs is important for diagnosing a C-shaped mandibular second molar.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.1E
• /
• pp.44-53
• /
• 1998

Bolt degradation has become a major issue in the nuclear industry since the 1980's due to failure during operation. If small cracks in stud bolt are not detected early enough, they grow rapidly and cause catastrophic disasters. Their detection, despite its importance, is known to be a very difficult problem due to the complicated structures of the stud bolts. This paper presents a method of detecting and sizing a small crack in the root between two adjacent crests in threads. The key idea is from the fact that the Rayleigh wave propagates slowly along a crack from the tip to the opening and is reflected from the opening mouth. When there exists a crack, a small delayed pulse due to the Rayleigh wave is detected between large regularly spaced pulses from the thread. The delay time is the same as the propagation delay time of the slow Rayleigh wave and is proportional to the size of the crack. To efficiently detect the slow Rayleigh wave, three methods based on digital signal processing are proposed : modified wave shaping, dynamic predictive deconvolution, and dynamic predictive deconvolution combined with wave shaping.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4112-4119
• /
• 2023

This study employs the microshear test method to examine the local mechanical properties of narrow-gap welded joints, revealing the mechanical inhomogeneity by evaluating the microshear strength, stress-strain curves, and failure strain. On this basis, the influence of weld joints micromechanical inhomogeneity on the crack tip opening displacement (CTOD) fracture toughness is investigated. From the root weld layer to the cover weld layer, the fracture toughness at the center of the weld seam demonstrates an increasing trend, with the experimental and calculated CTOD values showing a good correspondence. The microproperties of the welded joints significantly impact the load-bearing capacity and fracture toughness. During the deformation process of the "low-matching" microregions, the plastic zone expansion is hindered by the surrounding microregion strength constraints, thus reducing the fracture toughness. In contrast, during the deformation of the "high-matching" microregions, the surrounding microregions absorb some of the loading energy, partially releasing the concentrated stress at the crack tip, which in turn increases the fracture toughness.

• Cross-Cultural Studies
• /
• v.44
• /
• pp.147-189
• /
• 2016

This study attempted to investigate the issue how stepmother's narrative was transferred to . For this agenda, the approach of this paper is described below to determine how Bbaengdeok's stepmother narrative was transferred episodically to . First, this paper started from the relation between stepmother narrative and affiliated with each root folk tale in Buddhist text. Among known as root folk tale until now, this paper investigated whether was the root folk tale affiliated to Buddhist literature. At that point, stepmother narrative showed relation with opening eyes motive. It has been reported that the text of opening eyes in Buddhist literature is originated from the south. This paper confirmed that 's stepmother narrative was related to Buddhist literature originated from south. Next, this paper investigated the background of opening eyes motive of stepmother types. After entering Gyeongpan , it formed Bbaengdeok narrative of Wanpan related to Literary geography of Jeollado enjoying space of Wanpan . There are two evidences for this. The first one is which was passed down around Jeollado. In the course of sudden Buddhist folklore's flow into the country, it is that combined stepmother narrative of sudden Buddhist literature with the characteristics of northern Buddhist literature which was reconstructed into son's filial behavior of northern Buddhist literature to make father's blinded eyes open. The other is the Buddhist trend of the late 18th Chosun when northern Buddhist literature and sudden Buddhist literature were combined. It appeared that stepmother narrative was formed in the Buddhist background of the late 18th Chosun when northern Buddhist literature and sudden Buddhist literature were combined.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.162-168
• /
• 2007

Impaction of the maxillary central incisor may cause social, esthetic, and functional problems in children. There are various means of treatment for the inverted maxillary central incisor, such as extraction, surgical opening followed by orthodontic traction surgical repositioning or intra-alveolar autotransplantation prior to extraction. In this case, we surgically repositioned the inverted maxillary central incisor to normal semi-erupted position in a 5-year-old boy The developmental stage of the inverted tooth was Nolla's 6.5, which indicates formation of less than one third of the root. After surgical reposition, we did follow-up for 21 months, expecting spontaneous growth Unfortunately, poor prognosis was noted further root was not observed. Such failure seems to originate from possible injury on Hertwig's epithelial root sheath by surgical trauma. We performed surgical repositioning to retain the tooth instead of extraction. However, arrest of root development occurred which is one of the critical complications. In order to increase the success rate of the surgical reposition procedure, minimal surgical trauma is required as well as selection of adequate indication and decision of proper time of treatment considering the stage of root development.

• Journal of Pharmacopuncture
• /
• v.25 no.4
• /
• pp.369-381
• /
• 2022

Objectives: Hyperlipidemia (HL) is a major cause of ischemic heart diseases. The size-limiting effect of ischemic preconditioning (IPC), a cardioprotective phenomenon, is reduced in HL, possibly because of the opening of the mitochondrial permeability transition pore (MPTP). The objective of this study is to see what effect pretreatment with Inula racemose Hook root extract (IrA) had on IPC-mediated cardioprotection on HL Wistar rat hearts. An isolated rat heart was mounted on the Langendorff heart array, and then ischemia reperfusion (I/R) and IPC cycles were performed. Atractyloside (Atr) is an MPTP opener. Methods: The animals were divided into ten groups, each consisting of six rats (n = 6), to investigate the modulation of I. racemosa Hook extract on cardioprotection by IPC in HL hearts: Sham control, I/R Control, IPC control, I/R + HL, I/R + IrA + HL, IPC + HL, IPC + NS + HL, IPC + IrA+ HL, IPC + Atr + oxidative stress, mitochondrial function, integrity, and hemodynamic parameters are evaluated for each group. Results: The present experimental data show that pretreatment with IrA reduced the LDH, CK-MB, size of myocardial infarction, content of cardiac collagen, and ventricular fibrillation in all groups of HL rat hearts. This pretreatment also reduced the oxidative stress and mitochondrial dysfunction. Inhibition of MPTP opening by Atr diminished the effect of IrA on IPC-mediated cardioprotection in HL rats. Conclusion: The study findings indicate that pretreatment with IrA e restores IPC-mediated cardioprotection in HL rats by inhibiting the MPTP opening.