• 제목/요약/키워드: Room Unit

검색결과 703건 처리시간 0.022초

[4+4] Cyclodimer of tert-Butyl 9-Anthroate and Furan and [4+4] Cyclodimers of Alkyl 9-Anthroate

  • 노태희;임희준;김대균;전경문
    • Bulletin of the Korean Chemical Society
    • /
    • 제18권9호
    • /
    • pp.998-1002
    • /
    • 1997
  • Irradiation of tert-butyl 9-anthroate and furan through a Uranium glass filter gave the [4+4] cyclodimer (21.8%) of tert-butyl 9-anthroate and furan and the 1,4-10',9' cyclodimer (4.2%) of tert-butyl 9-anthroate as well as the 9,10-10',9' cyclodimer (65.7%) of tert-butyl 9-anthroate. The [4+4] cyclodimer of tert-butyl 9-anthroate and furan was found to be thermally dissociated into their unit components with the activation enthalpy of 35.6 kcal/mole and the activation entropy of 7.6 eu, and photochemically dissociated to produce excited tert-butyl 9-anthroate. Quantum yields for the photodissociation to tert-butyl 9-anthroate and the formation of excited tert-butyl 9-anthroate in cyclohexane at room temperature were determined to be 0.56 and 0.19, respectively. The 1,4-10',9' cyclodimer of tert-butyl 9-anthroate in DMF was thermally dissociated into tert-butyl 9-anthroate with the activation enthalpy of 34.8 kcal/mole and the activation entropy of 16.4 eu. Upon irradiation, the [4+4] cyclodimers of tert-butyl 9-anthroate and the [4+4] cyclodimers of methyl 9-anthroate were quantitatively dissociated. However, no adiabatic photoreversion was observed from any of the cyclodimers. Quantum yields for the photodissociation in cyclohexane at room temperature were measured and compared.

강의실에서 환기시스템과 난방시스템의 풍량에 따른 PMV와 $CO_2$ 농도 특성 비교 (Comparison of the PMV and $CO_2$ concentration Characteristic in the Lecture Room with a Different Airflow rate of the Ventilation System and Heating System for heating season)

  • 한창우;노광철;오명도
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2006년도 하계학술발표대회 논문집
    • /
    • pp.411-416
    • /
    • 2006
  • In this paper, we performed the experimental and numerical study on the thermal comfort(TC) and indoor air quality(IAQ) in the lecture room with a different airflow rate of the ventilation system and heating system for heating season. Through the experimental results, we found out that there was considerably difference of the PMV but there was little difference of $CO_2$ concentration with a different heating system. From a numerical results, the best operating condition was that discharge airflow rate of SAC is 29 CMM and supply airflow rate of the ventilation system is 1,200 CMH from a viewpoint of TC and IAQ.

  • PDF

A study on Visual Expression to express Sound Characteristics of Public Places

  • Park, Dong-Cheol
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제13권4호
    • /
    • pp.11-21
    • /
    • 2021
  • The causes of noise generation according to the classification of indoor spaces are very diverse. Individual happiness is infringed by this noise. In this paper, We tried to visualize the spatial sound characteristics of public places using sound color to express them so that anyone can sympathize. The noise inside a conference room of a medical device company was measured for 100 minutes, and the frequency band was divided into three different types of existing sound pressure expression units. Because the size of the noise is expressed differently depending on the situation, There are cases where there is a difference of opinion between the measurer and the researcher. This noise measurement experiment was conducted, and the sound color was applied to classify it on a log scale considering auditory characteristics. As a result of comparing this with the result expression for different loudness expression units, A specific table in different units yielded almost similar results. In addition, the sound source section for 100 minutes was divided into three analysis sections, the analysis sections were different, and the size of the energy ratio for each analysis section was divided in the form of an envelope. The characteristics of the low-frequency region of the space have a high energy ratio, and the decrease in the energy ratio according to the increase in frequency is constant and regular. You can see that conversations are possible.

Chest Wall Reconstruction for the Treatment of Lung Herniation and Respiratory Failure 1 Month after Emergency Thoracotomy in a Patient with Traumatic Flail Chest

  • Seok, Junepill;Wang, Il Jae
    • Journal of Trauma and Injury
    • /
    • 제34권4호
    • /
    • pp.284-287
    • /
    • 2021
  • We report a case of delayed chest wall reconstruction after thoracotomy. A 53-yearold female, a victim of a motor vehicle accident, presented with bilateral multiple rib fractures with flail motion and multiple extrathoracic injuries. Whole-body computed tomography revealed multiple fractures of the bilateral ribs, clavicle, and scapula, and bilateral hemopneumothorax with severe lung contusions. Active hemorrhage was also found in the anterior pelvis, which was treated by angioembolization. The patient was transferred to the surgical intensive care unit for follow-up. We planned to perform surgical stabilization of rib fractures (SSRF) because her lung condition did not seem favorable for general anesthesia. Within a few hours, however, massive hemorrhage (presumably due to coagulopathy) drained through the thoracic drainage catheter. We performed an exploratory thoracotomy in the operating room. We initially planned to perform exploratory thoracotomy and "on the way out" SSRF. In the operating room, the hemorrhage was controlled; however, her condition deteriorated and SSRF could not be completed. SSRF was completed after about a month owing to other medical conditions, and the patient was weaned successfully.

외래 및 퇴원환아 부모의 전화상담요구와 간호중재에 대한 조사연구 (An investigational study on telephone calls to the pediatric nursing unit)

  • 강화자;한경자;최명애;박승현;김영미;권원경;김선구;안혜영;허미영
    • Child Health Nursing Research
    • /
    • 제2권1호
    • /
    • pp.112-126
    • /
    • 1996
  • The purpose of this study was to investigate the current status of the need of telephone call and to identify the status of nursing intervention through telephone. Head nurses of the pediatric nursing unit and a nurse of pediatric outpatient clinic wrote down the telephone record of calls by parents of children discharged from hospital from 7 am to 3 pm during the period of March to June, 1995. Content of 120 telephone calls but for 26 calls with incomplete record among 146 calls were analyzed into frequency of general characteristics, needs and nursing intervention. The needs of telephone call were identified and classified into 11 areas and analyzed into frequency of detailed content by 11 areas. Nursing intervention was identified and classified into 10 categories, and analyzed into frequency of detailed content by 10 categories. The findings of this study were as follows ; The need of telephone call was identified with nutritional state, medication, vital signs, language retardation, personal hygiene, vaccination, administration procedure, physical symptoms, follow up care management and others. The most frequent needs were physical symptoms and vaccination. A kind of food among nutrition dose of drugs among medication, fever among vital signs, cough among physical symptoms, and content of vaccination among vaccination was the most frequent needs. Nursing intervention through telephone was identified with instruction, knowledge offer, information offer, judgement, solicitation, referral and instruction, referral, connection, reassurance, reservation, and regulation. Instruction, knowledge offer and information offer was the most frequent nursing intervention by telephone call. Instruction was about a visit to hospital, a visit to nearby clinic, instruction about symptoms,, instruction about nursing care procedure, retelephoning and vaccination. Knowledge offer was about vaccination, knowledge related to medication, and dental care. Information offer and judgement was about vaccination and medication. Referral and instruction delivery was about instruction delivery following consultation to doctor, visit to emergency room and a visit to hospital following consultation to doctor. These results suggest that telephone call intervention program should be established as a field of extended pediatric nursing role in health care delivery system for the children.

  • PDF

공동주택에서의 화재경보음 전달 (Fire Alarm Sound Transmission in Apartment Units)

  • 정정호
    • 한국화재소방학회논문지
    • /
    • 제32권3호
    • /
    • pp.67-75
    • /
    • 2018
  • 공동주택 화재 발생시 인명피해 최소화 및 재실자의 신속한 대피를 위해서는 화재 발생 사실이 경보음을 통해 전체 세대로 전달되어야 한다. 공동주택의 경우 엘리베이터 실과 같은 공용공간에 경종이 설치되어 있으나, 세대내 공간으로 경보음이 충분히 전달되지 못하는 것으로 알려져 있다. 본 연구에서는 실제 공동주택에서의 주,야간 소음을 측정하여 공동주택 세대 내 소음 발생 실태를 조사하고 세대내 공간으로의 경보음 전달 정도를 분석하였다. 엘리베이터 실에서 발생되는 경보음이 공동주택 내부로 전달되는 경우 방화문 및 방문의 차음성능으로 인해 충분히 전달되지 못하는 것으로 나타났다. 공동주택 내에서 발생되는 각종 소음 레벨을 고려하면 공동주택 외부에서 발생되는 경보음을 청취하여 피난행동을 시작하는 데는 어려움이 있는 것으로 판단된다. 이를 개선하기 위해 공동주택 거실의 월패드와 각 방별로 경보음 발생기를 설치한 경우에 대하여 음향시뮬레이션을 실시하였다. 각 방별로 경보음 발생기를 설치한 경우에서만 배경소음 + 15 dB 기준과 75 dB (A) 기준을 만족하는 것으로 나타났다.

Pd/ZSM-5 촉매와 저온 플라즈마를 이용한 사과와 키위의 상온 저장 안정성 향상 (Improvement of Storage Stability of Apple and Kiwi at Room Temperature Using Pd/ZSM-5 Catalyst and Nonthermal Plasma)

  • 김승건;이호원;목영선;유승민;전형원;김성봉
    • 공업화학
    • /
    • 제32권5호
    • /
    • pp.547-555
    • /
    • 2021
  • 본 연구에서는 촉매-플라즈마 반응기를 농산물(사과, 키위) 저장고에 적용하여 저장 중 발생되는 에틸렌을 제거하고자 하였다. 1 m3 유닛 컨테이너 2개를 제작하여 에틸렌을 처리하지 않는 대조군과 발생하는 에틸렌을 촉매와 플라즈마에 의해 처리하는 실험군으로 구분하여 상온에서의 장기 저장성을 비교하였다. 또한 실험군에는 곰팡이 등의 세균 증식을 억제하기 위하여 소량의 오존을 주입하였다. 상온에서 사과와 키위를 각각 50 day와 57 day 동안 저장하여 에틸렌 농도 변화, 경도, 당도, 산도, 및 손실율을 비교하였다. 저장기간 동안의 에틸렌 농도 변화는 대조군이 실험군에 비해 높게 나타나 실험군에서 에틸렌이 효과적으로 제거되는 것으로 나타났다. 저장 후의 경도, 당도 및 당산비는 저장 전에 비해 좋게 나타났으며, 특히 키위가 사과에 비해 높게 향상하였다. 또한 저장 종료 후, 대조군에서 사과와 키위의 손실율은 각각 10%와 54.1%로 나타났으나, 실험군에서의 손실율은 각각 6%와 34.8%로 나타났다. 따라서 실험군의 저장성이 대조군에 비해 좋게 나타났다.

방사선촬영실 감염 방지를 위한 에니오설프의 소독효율 연구 (Research on ANIOS Disinfection Efficiency to Prevent Infection in Radiography Room)

  • 정우찬;안기송;양은주;김영재
    • 한국방사선학회논문지
    • /
    • 제15권1호
    • /
    • pp.55-61
    • /
    • 2021
  • 방사선 촬영실은 감염원을 지닌 환자와 간접적인 접촉이 빈번하게 일어나 2차 감염에 노출될 위험성이 높다. 따라서 본 연구는 흉부 X선 촬영을 대상으로 방사선사와 환자가 빈번하게 접촉하는 부위를 4급 암모늄세정제 중 하나인 에니오설프(ANIOS, ANIOSURF Premium NPC)를 이용하여 소독 전, 후의 미생물을 채z취한 후 비교하였다. 2020년 9월 1일부터 9월 7일까지 대구광역시 P병원을 대상으로 X-ray tube handle, Chin rsgion, Chest region, Palm region을 수송배지(TransystemTM, Copan Diagnostics Inc., Murrieta, CA, USA) 내의 멸균면봉을 사용하여 10×10㎠ 크기로 채취한 후 비색법을 통해 소독 전, 후 동정결과를 획득하였다. 그 결과 X-ray tube handle의 경우 Proteus mirabilis, Staphylococcus epidermidis, Bacillus spp., Candida spp이 검출되었고, Chin region의 경우 Proteus mirabilis, Enterococcu faecium, Pseudomonas aeruginosa, NTM이 검출되었고, Chest region의 경우 Proteus mirabilis, Enterococcu faecium, Pseudomonas aeruginosa이 검출되었고, Palm region의 경우 NTM, Candida spp.이 검출되었으며 공통적으로 103 CFU(Colony Forming Unit) 이상이 측정되었다. 소독 후 Chest region, Palm region에서는 미생물이 검출되지 않았고 X-ray tube handle에서만 Bacillus spp.이 검출되었으며 102 CFU 이상이 측정되었다. 소독 전 검출된 미생물은 대부분 기회감염균의 일종으로 소독 후 이러한 미생물의 수가 줄어들거나 제거되는 것을 통해 에니오설프(0.25%)는 에탄올(ethanol, 70~90%)와 이소프로필 알코올(Isopropyl alcohol, 70~90%)과 비교하였을 때 우수한 경제성과 유사한 소독효율을 보였다. 하지만 소독 후 Bacillus spp.가 검출됨에 따라 아포균에 대한 심화된 연구가 필요하다고 생각된다. 본 연구는 방사선 검사실 내 감염관리의 중요성을 재고하였으며 병원 내 2차 감염을 예방하기 위한 유용한 기초자료로 사용될 것으로 사료된다.

의류산업의 생산 자동화 현황과 그에 따른 생산기획 및 관리에 관한 연구 (A Study on the Production Planning and Management for Automated Clothing Manufacture)

  • 박진아;조진숙
    • 한국의류학회지
    • /
    • 제21권1호
    • /
    • pp.19-34
    • /
    • 1997
  • The goals of this study are to suggest the guidance for automated clothing manufacture by analysis the technology of the automated manufacturing facilities and to propose how improve the efficiency of the production planning and management for automated clothing manufacture In this study, the research about the automated clothing manufacturing machines and the analysis about the modules and functions of apparel information systems were performed. In order to understand the factory automation of the larger clothing firms, the case study method was used. The case study samples were 3 clothing firms. The results and suggestions are as follows: 1. An information technology for automated clothing manufacture has enabled the computer integrated manufacturing system to connect production planning and management part with each work station on the factory floor. 2. The apparel information system to integrate and manage manufacturing informations from each workstation and the apparel CAD system are used in the department of production planning. At the cutting room, there are automated manufacturing machines like an automatic spreading system and an automatic cutting system. Sewing room has the computer controlled unit production system and semi-automated sewing machines. In addition, in the finishing room, an automatic packing machine and a press system are used and besides a warehousing system has been developed. Considering these available technology, for better product efficiency, it is necessary to consider and utilize the specific character of these automatic manufacturing machines and computer system whether they proper to each product style. 3. Most of the clothing manufacturers are in the stage of semi-automated manufacture. In order to improve the manufacturing environment, it is needed to gradual procedure of manufacturing automation with considering the firm's financial condition, existing facilities and staffs operating machines. The case study sample firms are in the high degree of manufacturing automation. They can accomplish the flexible manufacturing system to link the information system with each work station menufacturing system by computerized control. For the case of the firm having already used the computer integrated manufacturing and managing system, it is necessary that the function to deal with drawing information is added to the retaining module of the apparel system.

  • PDF

일부 병원 실내에서의 공기중 미생물 오염에 관한 연구 (A Study on Airborne Microorganism in Hospital)

  • 정선회;백남원
    • 한국산업보건학회지
    • /
    • 제8권2호
    • /
    • pp.231-241
    • /
    • 1998
  • To assess biological indoor air quality in hospital, concentrations of viable airborne microbes were determined at intensive care unit(ICU), patient room (PR), outpatient waiting room(OPWR) in hospitals of large(1000 beds), middle(500 beds), small(100 beds) hospitals, respectively. Gram positive bacteria, gram negative bacteria, fungi were sampled using suctional sampling method by RCS sampler (Reuter centrifugal air sampler) and RCS GK-A agar plate. In gram positive bacteria groups, CNS(Coagulase Negative Staphylococcus), Micrococcus, Lactobacillus, S. aureus, Enterococcus, St. viridans identified. In gram negative bacteria groups, A. baumannii, Kl. peumoniae and E. coli were identified, and Penicillium was identified in fugi groups. Results of the study were as follows. 1. The highest concentrations of airborne microbes was $971CFU/m^3$ at 5:00 PM in small hospital patient room, and average concentrations of airborne microbes in large, middle and small hospitals were $282CFU/m^3$, $289CFU/m^3$ and $625CFU/m^3$, respectively. Average concentrations of airborne microbes in office(control) was $90CFU/m^3$. Thus, the small hospital showed the worst condition. 2. Representatives of 8 different genera were identified in 150 samples. The most frequently isolated organisms were Staphylococcus (73.0%), Micrococcus (20.7%) and Lactobacillus (4.7%), respectively. Pathogenic microbes isolated were A. baumannii, E. coli, Enterococcus, Kl. peumoniae, S. aureus, St. viridans and Penicillium as fungi. In office, no pathogenic microbes were identified. Average concentrations of airborne pathogenic microbes in large, middle and small hospital were $5CFU/m^3$ (2%), $11CFU/m^3$ (4%) and $12CFU/m^3$ (2%), respectively. Thus, condition in a large hospital was better than those in a middle and a small hospital.

  • PDF