• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.86-92
• /
• 1999

The nanofiltration (NF) membranes based on poly(vinyl alcohol) (PVA) and sodium alginate (SA) were prespared. Homogeneous PVA/SA blend membranes were prepared by casting a PVA/SA (95/5 in wi%) mixture solution on an acryl plate followed by drying at a room temperature and by cros-slinking with glutaraldehyde (GA) for 20 minutes PVA/SA blend composite membranes were also prepared by coating a PVA/SA (95/5 in wi%) mixture solution on microporous polysulfone(PSF) supports. The PVA/SA active layer of the composite membrane was crosslinked at room temperature by using an membranes were characterized with a scanning electron microscopy (SEM) a fourier transform infrared spectroscopy (FTIR) and permeation tests. The permeation properties of the composite membrane were as follows: 1.3{{{{ {m }^{2 } }}}}/{{{{ {m }^{2 } }}}}day of flux and >95% of rejection at 200 psi for a 1000 ppm PEG600 solution.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제35권1호
• /
• pp.45-50
• /
• 2017

Using the relatively low-cost, far-infrared dryer inhibiting the destruction of a variety of physiologically active components of the mulberry fruit, we have studied to make semidry mulberry fruit that can be kept at room temperature for a long time. By adjusting the temperature of the far-infrared dryer step-by-step, we developed a semi-dry method of maintaining the shape of the mulberry fruit. In addition, by drying the coating of honey after removing the juice generated by the mulberry fruit thawing process improved the acceptability of the taste of fruit. We conducted heat treatment mulberry fruit into a $95^{\circ}C$ infrared dryer 5 hours to thaw the frozen mulberry fruit. After 10 to 20% of honey coating, the primary drying ($95^{\circ}C$, 5 hours) was implemented. then, the secondary drying was conducted after controlling the temperature of the far infrared dryer $60^{\circ}C$, for 10 hours. These manufacture process was able to obtain semi-dried mulberry fruit. Dry weight ratio and moisture content were around 25%, and around 16% level respectively. It was to enable long-term storage at room temperature. Therefore, it is suggested that the method of using the far-infrared drying machine to manufacture semi-dried mulberry fruit can be a way to improve the farm income if applied to the farm.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.181-182
• /
• 2002

Most recent, Plasma ceramic spray is used on parts of tribosystem, has been investigated on the tribological performance. The application of ceramic coatings by plasma spray has become essential in tribosystems to produce better wear resistance and longer life in various conditions. The purpose of this work was to investigate the wear behavior of $8%Y_2O_3-ZrO_2$ coating due to temperatures of post-spay heat treatment. The plasma-sprayed $8%Y_2O_3--Zirconia$ coating was idiscussed to know the relationship between phase transformations and temperatures of post- spray heat treatment. Wear tests was carried out with ball on disk type on normal load of 50N, 70N and 90N under room temperature. The transformation of phase and the value of residual stress were measured by X-ray diffraction method(XRD). Tribological characteristics and wear mechanisms of coatings was observed by SEM. The tribologieal wear performance was discussed a point of view for residual stress. Consequently. post-spray heat treatment plays an important role in decreasing residual stress. Residual stress in coating system has a significant influence on the wear mechanism of coating.

• Advances in nano research
• /
• 제4권4호
• /
• pp.281-294
• /
• 2016

The advantages of nano-scale materials (size 1-99 nm in at least in one dimension) could be realized with their potential applications in diversified avenues. Herein, we report for the first time on the successful synthesis of homogeneous epoxy coatings containing phytogenic silver nanoparticles (Ag) on PVC and glass substrates by room-temperature curing of fully mixed epoxy slurry diluted by acetone. Alstonia scholaris bark extract was used to reduce and stabilize the silver ions. The surface morphology and mechanical properties of these coatings were characterized using the techniques like, UV-Vis (UV-Visible) spectrophotometry, X-ray diffraction (XRD), Fourier transform infrared spectrophotometry (FT-IR), Epifluorescence microscopy and scanning electron microscopy (SEM). The effect of incorporating Ag nanoparticles on the biofilm (scale) resistant epoxy-coated PVC was investigated by total viable counts ($CFU/cm^2$) from epoxy coating from (Initial) $1^{st}$ day to $25^{th}$ days. The phytogenic Ag nanoparticles were found to be significantly improving the microstructure of the coating matrix and thus enhanced the anti-biofilm performance of the epoxy coating. In addition, the antimicrobial mechanism of Ag nanoparticles played an important role in improving the anti-biofilm performance of these epoxy coatings.

• 한국세라믹학회지
• /
• 제29권8호
• /
• pp.667-673
• /
• 1992

The alumina-zirconia composite powders of core particle ZrO2 coated with Al2O3 were prepared by the hydrolysis-deposition of the mixed aluminum salt solution of Al2(SO4)3-Al(NO3)3-Urea. The effects of hydrolysis reaction and coating parameters on characteristics of coated powders and composites were also investigated. The degree of coating could be estimated from the ratio of tetra-/mono-ZrO2 present at the room temperature after heat-treating coated powders at 120$0^{\circ}C$ and the result of TEM observations. When the content of ZrO2 in the dispersed coating system, the coating time, and the volume ratio of water/solution were 50 mg/g, 180 min, and 5, respectively the coating efficiency was maximum (the ratio of tetra-/mono-ZrO2 was 87/13). The relative densities of coated Al2O3-ZrO2 composites sintered at 1$650^{\circ}C$ for 4 hrs were about 91~98% and the maximum ratio of tetra-/mono-ZrO2 in Al2O3-20wt% ZrO2 composites was 62/38.

• 열처리공학회지
• /
• 제19권4호
• /
• pp.200-207
• /
• 2006

In addition to the basic properties of the base and top coating agents, corrosion resistance of non-chrome magni 565 coating and characteristics of coating film when coated to steel substrate were studied. The system had a good wettability at room temperature. Moreover, both the contact angle and surface tension were affected little by the viscosity of coating agent and surface roughness of the steel substrate. And the samples coated with optimal conditions showed a great corrosion resistance in salt spray test with 1500 hours or longer of initial appearance time of rust. The coating film was composed of overlapping layer of zinc and aluminium flakes, and the thickness of base coat increased with an increase of base coat viscosity. Based on the C-F peaks of 1,1-Difluoroethaen homo-polymer, it was thought that the base coat was an inorganic polymer bond layer. Meanwhile, the top coat showed C-F peaks of polytetrafluoroethylene with C-H peaks of phenol in FT-IR analysis. From the lower weight loss of base coat in TG analysis, it was thought that cross linking density of base coat was larger than that of top coat. It was thought that the small exothermic reactions observed in DSC curves were due to the thermosetting resins contained in the coating agents. Compared to the non-coated specimen, the coated sample showed more higher polarization resistance and corrosion potential with lower corrosion current density.

• 대한금속재료학회지
• /
• 제47권1호
• /
• pp.13-20
• /
• 2009

This work presents functionally graded coatings (FGC) of hydroxyapatite (HA) and metallic powders on Ti-6Al-4V implants using plasma spray coating method. HA has been the most frequently used coating material due to its excellent compatibility with human bones. However, because of the abrupt changes in thermomechanical properties between HA and the metallic implant across an interface, and residual stress induced on cooling from coating temperture to room temperature, debonding at the interface occurs in use sometimes. In this work, FGC of HA and Ti or Ti-alloy powders is made to mitigate the abrupt property changes at the interface and the effect of FGC on residual stress release is investigated by evaluating the mechanical bond strength between the implant and the HA coating layers. Thermal annealing is done after coating in order to crystallize the HA coating layer which tends to have amorphous structure during thermal spray coating. The effects of types and compositional ratio of metallic powders in FGC and annealing conditions on the bond strength are also evaluated by strength tests and the microstructure analysis of coating layers and interfaces. Finally, biocompatibility of the coating layers are tested under ISO 10993-5.

• 공업화학
• /
• 제22권1호
• /
• pp.81-86
• /
• 2011

자기 조립성 염료인 Sunset Yellow-FCF 수용액은 상온에서 농도 25 wt%부터 schlieren 구조의 액정상을 보이기 시작하여, 28 wt% 이상이면 완전한 네마틱 액정상으로 관찰되었다. 전단배향에 의한 코팅으로 광학적 이방성 필름을 제조하기 위해서는 30 wt% 이상의 농도가 필요하였다. 액정 색소의 농도, 코팅속도, 건조 온도, 상대습도 등 코팅 변수가 최종 박막필름의 두께, 투과도에 미치는 영향 분석에 의하면, 최종 필름의 두께에는 용액의 농도가 가장 큰 영향을 주었으며, 평행방향의 투과도에는 건조 온도와 농도의 영향이 가장 컸다. 특히 Sunset Yellow-FCF의 농도 증가로 전단코팅에 의한 배향성이 개선되고 높은 편광도를 갖는 필름제조가 가능하였다. 본 실험에서는 33 wt%의 Sunset Yellow-FCF 수용액을 사용하면, 89.7~98.7%의 편광도를 갖는 광학적 이방성 필름이 제조되었다.

• 한국결정성장학회지
• /
• 제32권5호
• /
• pp.205-211
• /
• 2022

GSV (Granule Spray in Vacuum)는 상온의 진공하에서 나노 크기의 치밀한 세라믹 코팅층을 형성하는 방법이다. 일반적으로, 단사정의 지르코니아는 1150℃에서 정방정으로 변태하며, 이때 6.5 %의 체적변화를 일으켜 치밀한 단사정의 지르코니아를 만들기 어렵다. 본 연구에서는 코팅 효율에 대한 두 가지 처리 변수의 효과를 조사하는 데 중점을 두었다. 아울러, 특별한 가열과정 없이 형성된 필름의 미세구조에 관찰하였다. 샘플 기판에 증착된 지르코니아 필름에 대한 X-ray diffractometer (XRD) 분석은 단사정 지르코니아 필름이 성공적으로 증착되었음을 보여주었다.

• 대한기계학회논문집A
• /
• 제33권7호
• /
• pp.652-657
• /
• 2009

Strength characteristics of $Si_3N_4$ composite ceramics has been studied as functions of heat-treatment temperature and additive $SiO_2$. $SiO_2$ colloidal could significantly increase the bending strength. Crack healing temperature decreased 300 K by additive $TiO_2$. Bending strength of specimen added $SiO_2$ is higher than that of non-added $SiO_2$. Moreover, bending strength of specimen with $SiO_2$ colloidal coating is much higher that of non-coated specimen. In in-situ observation, crack-healed specimen at 1,573 K shows phenomenon like a fog on the surface. By SPM, both crack-healed specimen, non-coating and coating of $SiO_2$ colloidal, at 1,273 K were healed completely but both of 1,573 K exist crack. This was made by evaporation of $SiO_2$ at high temperature. Crack-healing materials of $Si_3N_4$ composite ceramics is crystallized $Y_2Si_2O_7$, $Y_2Ti_2O_7$ and $SiO_2$. A large amount of Si and O, and little C were detected by EPMA. Si and O increase but C decreases according to heat treatment temperature. Specimens with additive $SiO_2$ were more detected Si and O than that of non-additive $SiO_2$. Specimen with $SiO_2$ colloidal coatings were much more detected O.