• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.101-107
• /
• 1995

To improve the leakage current, we developed two step sputtering method where PZT thin film in first deposited at room temperature followed by 600.deg. C deposition. The method used an amorphous PZT layer deposited at room temperature to keep a stable interface during sputtering at high temperature. PZT thin films were deposited on Pt/Ti/SiO$_{2}$/Si substrate at room temperature and 600.deg. C sequentially. The effect of the layer deposited at room temperature was investigated with regard to I-V characteristics and P-E hysteresis loop. In the case of the sample with the layer deposited at room temperature, both leakage current and dielectric constant were decreased. The thicker the layer deposited at room temperature was, the lower dielectric constant was. However, leakage current was indepenent of the variation of the thickness ratio. The sample with 200$\AA$ of the layer deposited at room temperature showed the most promising results in both dielectric constant and leakage current.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.20.2-20.2
• /
• 2011

BMNO dielectric materials with a pyrochlore structure have been chosen and they have quite high dielectric constants about 210 for the bulk material. In the case of thin films, 200-nm-thick BMNO films deposited at room temperature showed a low leakage current density of about $10^{-8}\;A/cm^2$ at 3 V and a dielectric constant of about 45 at 100 kHz. Because high dielectric constant BMNO thin films kept an amorphous phase at a high temperature above $900^{\circ}C$. High dielectric constant BMNO thin films grown at room temperature have many applications for flexible electronic devices. However, because the dielectric constant of the BMNO films deposited at room temperature is still low, percolative BMNO films (i.e., those were grown in a pure argon atmosphere) sandwiched between ultra-thin BMNO films grown in an oxygen and argon mixture have greater dielectric constants than standard BMNO films. However, they still showed a leakage problem at a high voltage application. Accordingly, a new nano-structure that uses BMNO was required to construct the films with a dielectric constant higher than that of its bulk material. The fundamental reason that the BMNO-Bi nano-composite films grown by RF-Sputtering deposition had a dielectric constant higher than that of the bulk material was addressed in the present study. Also we used the graphene as bottom electrode instead of the Cu bottom electrode. At first, we got the high leakage current density value relatively. but through this experiment, we could get improved leakage current density value.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.552-558
• /
• 1999

Ventilation of the marine engine room is very important for the health of the workers as well as the normal operation of machines. To find proper ventilation conditions of this engine room numerical simulation with a standard k-$\varepsilon$model was carried out. In the present study the marine engine room is considered as a closed space with a heat source and forced ventilation ducts. The injection angle of air supply is found to be important. Injection with a downward angle depresses recirculation flow causing a strong stream in the wider space of the room Ventilation and removal of the released heat are promoted with this pattern, There is a possibility of local extreme heating at the upper surface of the engine when supply and exhaust ports of air are in bilateral symmetry.

• 한국안전학회지
• /
• 제23권3호
• /
• pp.51-57
• /
• 2008

NDT(Non-Destructive Testing Evaluation) using electromagnetic(EM) properties can be used for evaluation of physical performance in cement-based materials. In this study, a technique for strength evaluation in cement mortar is proposed through the measured EM properties(conductivity and dielectric constant). For this research, cement mortar specimens with 5 W/C ratios are made for evaluation of compressive strength and they are also utilized for tests of EM properties in the range of $0.2{\sim}20GHz$ frequency considering exposure condition and curing period. The averaged conductivity and dielectric constant in $5{\sim}20GHz$ frequency are reduced to $83{\sim}93%$ and $81{\sim}87%$, respectively with increasing water to cement ratios. Through the linear regression analysis, relationships between EM properties and results from the compressive strength are obtained, which shows higher correlated factor($0.93{\sim}0.94$) in the specimens exposed to room condition. The gradients in dielectric constant for strength results is measured to be higher than those in conductivity by $3.9{\sim}5.1$ times. The results from dielectric constant in room condition shows the most efficient relation for evaluation of strength.

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.841-848
• /
• 1994

The sintering behavior of La-modified PbTiO3 ceramics was investigated in order to improve the poor sinterability of PbTiO3. Addition of La improved the sinterability. It was confirmed that this improvement was due to the decrease in tetragonality ratio c/a of crystal lattice. The variations of dielectric constant and pyroelectric coefficient were measured with temperature. It was observed that with the increase of La content, Curie temperature decreased and dielectric constant at room temperature increased. La-modified PbTiO3 ceramics had smaller pyroelectric figure of merits than those of pyroelectric materials in use. The effects of grain size on dielectric and pyroelectric properties were also investigated. The change of grain size had effect on maximum dielectric constant and pyroelectric coefficient, but is had little effect on pyroelectric figure of merit at room temperature. The closer examination near ferro-paraelectric phase transition temperature revealed that the behavior of phase transition approached a more relaxor character with the increase of La content and the decrease of grain size.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.989-992
• /
• 2001

(Ba$\sub$0.6-x/Sr$\sub$0.4/Ca$\sub$x/)TiO$_3$(x=0.10, 0.15, 0.20) specimens were fabricated by the solid state reaction method and then the structural and dielectric properties as a function of the composition ratio and sintering temperature were studied. The BSCT(50/40/10) specimen sintered at 1500$^{\circ}C$ showed the highest average grain size(18.25 ${\mu}$m). The Curie temperature and dielectric constant at room temperature decreased with increasing Ca content. The dielectric constant and dielectric loss of the BSCT(50/40/10) specimen, sintered at 1450$^{\circ}C$, were about 4324 and 0.972% at 1KHz, respectively. Dielectric constant at room temperature decreased with increasing an applied field, tunability of the BSCT(50/40/10) sintered at 1300$^{\circ}C$ was 18%.

• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.34-39
• /
• 2006

For the evaluation of the normalized impact sound pressure level, the reverberation time of the receiving room should be measured. This paper deals with the effect of the time constant of FFT analyzer and the measuring points on reverberation time. It is found that the time constant should be in the range between 10 ms and 35 ms. While the effect of measuring points on the reverberation time is significant when the bandwidth is narrow it is negligible in the evaluation of the normalized impact sound pressure level.

• 한국산학기술학회논문지
• /
• 제10권6호
• /
• pp.1201-1206
• /
• 2009

음상의 거리정위에 있어서 중요한 물리적 요인으로는 알려진 음압레벨, 반사음, 양 귀간 차, 음원의 종류, 머리전달함수(HRTF) 등의 여러 요인들이 중요한 판단 자료로 이용되어진다고 알려져 있다. 본 논문에서는 거리판단에 사용되어지는 물리적 요인 중 음압레벨의 크기가 거리정위에 미치는 영향을 알아보기 위해 반사음이 존재하지 않은 무향실에서 음원의 출력 음압레벨을 일정한 경우와 귀 입력 음압레벨을 일정하게 한 경우에 대하여 청취실험을 통해 거리판단에 있어서 음압레벨의 영향에 대하여 고찰했다. 그 결과. 음원출력 음압레벨을 일정하게 한 경우와 귀 입력 음압레벨을 일정하게 한 청취실험에 있어서 제시한 음원거리보다 지각한 음상거리를 가깝게 정위하는 경향이 있다는 것이 관찰되었다. 또, 귀 입력 음압레벨이 일정한 경우에는 약 2m 정도까지의 거리에서는 실제 제시한 음원거리의 증가에 따라 지각한 음상의 거리가 음원거리에 대응하여 증가하지만, 그 이상의 거리에서는 음원거리의 증가에 따라 지각한 음상거리가 증가가 거의 없음을 알 수 있었다. 반면 음원출력 음압레벨이 일정한 경우에는 지각한 음상거리가 귀 입력 음압레벨이 일정한 경우보다 보다 더 먼 3m 정도의 거리까지 증가하고 있음을 알 수 있었다. 이와 같은 청취실험 결과로부터 반사음이 존재하지 않은 조건에서의 음상의 거리정위에는 음압레벨이 거리판단의 중요한 요소로 작용하고 있음이 확인되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.199-204
• /
• 2000

This paper reports a thermal environmental analysis of a room in accommodated with multi-heat sources according to ventilation condition. Two case modification have been investigated to obtain the lower temperature distribution in the room. The temperature distribution of the original room were found about $25{\sim}35^{\circ}C$. As a result, the use of, three ventilating fans and two electric fans are useful for room ventilation respectively, and using two electric fan is more recommendable in side of economical efficiency.

• 설비공학논문집
• /
• 제13권6호
• /
• pp.524-531
• /
• 2001

The temperature and humidity distribution in a dry room are studied numerically by using standard$\kappa-\varepsilon$ turbulence model. In order to evaluate effective heat and moisture ventilation characteristics inside the room, the heat removal capacity and moisture exhaust efficiency are introduced. An effective ventilation control is analyzed by evaluating quantitatively temperature and humidity distributions. It was found that the mean absolute humidity inside the room was almost constant with approximately 0.1905g/kg air regardless of the models and the heat generation rates. This was believed that the moisture generation by workers was relatively small. 40% improvement of the critical decay time was achieved, through the modifications of design variables.