• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.19-24
• /
• 2020

In this work, the electrical property of Si-doped β-Ga2O3 was investigated via a post-growth annealing process. The Ga2O3 samples were annealed under air (O-rich) or N2 (O-deficient) ambient at 800~1,200℃ for 30 mins. There was no correlation between the crystalline quality and the electrical conductivity of the films within the experimental conditions explored in this work. However, it was observed the air ambient led to severe degradation of the film's electrical conductivity while N2-annealed samples exhibited improvement in both the carrier concentration and Hall mobility measured at room temperature. Interestingly, the x-ray photoemission spectroscopy (XPS) revealed that both annealing conditions resulted in higher concentration of oxygen vacancy (VO). Although it was a slight increase for the air-annealed sample, high resistivity of the film strongly suggests that VO cannot be a shallow donor in β-Ga2O3. Therefore, the enhancement of the electrical conductivity of N2-annealed samples must be originated from something other than VO. One possibility is the activation of Si. The XPS analysis of N2-annealed samples showed increasing relative peak area of Si 2p associated with SiOx with increasing annealing temperature from 800 to 1,200℃. However, it was unclear whether or not this SiOx was responsible for the improvement as the electrical conductivity quickly degraded above 1,000℃ even under N2 ambient. Furthermore, XPS suggested the concentration of Si actually increased near the surface as opposed to the shift of the binding energy of Si from its initial chemical state to SiOx state. This study illustrates the electrical changes induced by a post-growth thermal annealing process can be utilized to probe the chemical and electrical states of vacancies and dopants for better understanding of the electrical property of Si-doped β-Ga2O3.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.274-291
• /
• 2020

This year is the 50th anniversary of the adoption by UNESCO in 1970 of the Convention on the Means of Prohibiting and Preventing the Illicit Import, Export, and Transfer of Ownership of Cultural Property (the '1970 Convention'). Since its ratification of the 1970 Convention in 1983, the Republic of Korea has domestically implemented the Convention through its Cultural Heritage Protection Act, which was first enacted in 1962. This is a different form of implementation than is normally used for other UNESCO Conventions on cultural heritage, in that the Republic of Korea has recently adopted special acts to enforce the 2003 Convention for the Safeguarding of Intangible Cultural Heritage and the 1972 Convention concerning the Protection of the World Cultural and Natural Heritage. In addition, the 1970 Convention has been developed further through the introduction of new Operational Guidelines in 2015 for the concrete enforcement of the Convention, which has provided momentum for the Republic of Korea to analyze its current national legislation related to the 1970 Convention as well as consider its amendment in the future. Overall, the Cultural Heritage Protection Act of the Republic of Korea effectively reflects the duties of States Parties under the 1970 Convention. These include measures to introduce export certificates, prohibit the import of stolen cultural property, return other state parties' cultural property, and impose penalties or administrative sanctions in the event of any infringements. Indeed, the Republic of Korea's implementation of the 1970 Convention was introduced as an example of good practice at the Meeting of State Parties in 2019. However, changes in the illegal market for cultural property and development of relevant international law and measures imply that there still exists room for improvement concerning the legal implementation of the 1970 Convention at the national level. In particular, the Operational Guidelines recommend States Parties to adopt legal measures in two respects: detailed criteria for due diligence in assessing bona-fide purchasers, referring to the 1995 UNIDROIT Convention on Stolen or Illegally Exported Cultural Objects, and measures to address the emerging issue of illegal trade in cultural property on internet platforms. Amendment of the Cultural Heritage Protection Act and other relevant laws should be considered in order to duly reflect these issues. Taking that opportunity, concrete provisions to facilitate international cooperation in respect of the implementation of the 1970 Convention could be introduced as well. Such measures could be expected to strengthen the Republic of Korea's international legal cooperation to respond to the changing environment regarding illicit trafficking of cultural property and its restitution.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.317-322
• /
• 2020

This experiment was conducted to solve the failure of fruiting body production in the bottle cultivation of the oyster mushroom cultivar 'Heuktari'. The effects of incubation temperature on primordium formation and fruiting body yield of the oyster mushroom cultivar 'Heuktari' were investigated. The proper temperature for mycelium growth of 'Heuktari' on potato dextrose agar (PDA) medium is 23-26℃. The mycelial growth of 'Heuktari' was faster than that of Chunchu 2ho. During mycelial culture in sawdust medium, the temperature of the medium in the bottle initially increased, reached the highest point in the middle of the culture, and then decreased. The higher the set temperature, the shorter the incubation period. When the incubation temperatures were 20℃ and 24℃, respectively, the undeveloped primordium formation rates were low (1.8% and 4.2%, respectively). However, the rate of undeveloped primordium formation increased, and the yield decreased at incubation temperatures of 16℃ and 28℃. Mushroom farms that set incubation temperatures to 18℃ and maintained the medium temperature at less than 28℃ showed undeveloped primordium formation rates ranging between 0.3-0.8%. The rate of undeveloped primordium formation increased and the yield decreased in the farms with high incubation temperatures (above 28℃). We found that in order to reduce undeveloped primordium formation, the air inside the incubation room should be circulated continuously so that the temperature of the medium does not rise above 28℃, and dense incubation conditions should be avoided.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.175-198
• /
• 2022

With the development of technology, the methods of digitally converting various forms of analog information have become common. As a result, the concept of recording, building, and reproducing data in a virtual space, such as digital heritage and digital reconstruction, has been actively used in the preservation and research of various cultural heritages. However, there are few existing research results that suggest optimal scanners for small and medium-sized relics. In addition, scanner prices are not cheap for researchers to use, so there are not many related studies. The 3D scanner specifications have a great influence on the quality of the 3D model. In particular, since the state of light reflected on the surface of the object varies depending on the type of light source used in the scanner, using a scanner suitable for the characteristics of the object is the way to increase the efficiency of the work. Therefore, this paper conducted a study on nine small and medium-sized buried cultural properties of various materials, including earthenware and porcelain, by period, to examine the differences in quality of the four types of 3D scanners. As a result of the study, optical scanners and small and medium-sized object scanners were the most suitable digital records of the small and medium-sized relics. Optical scanners are excellent in both mesh and texture but have the disadvantage of being very expensive and not portable. The handheld method had the advantage of excellent portability and speed. When considering the results compared to the price, the small and medium-sized object scanner was the best. It was the photo room measurement that was able to obtain the 3D model at the lowest cost. 3D scanning technology can be largely used to produce digital drawings of relics, restore and duplicate cultural properties, and build databases. This study is meaningful in that it contributed to the use of scanners most suitable for buried cultural properties by material and period for the active use of 3D scanning technology in cultural heritage.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.529-538
• /
• 2020

This study aims to develop of contents for the activities of daily living training - Korean version that reflexes the domestic situation and can be applied to clinical practice. For contents development, a Delphi survey was conducted with 13 experts. In the first Delphi survey, 133 items of activities of daily living training are derived based on previous studies, and then the extracted items are asked to group of experts, and the derived items are answered for actual domestic clinical application. In the second survey, 118 items were added by excluding items with a low content validity ratio (CVR) including the results of the first survey, and adding items that can be derived from other opinions. In the 3rd survey, while presenting the 2nd Delphi survey items as they are, it provides an opportunity to change their opinions by presenting their 2nd response and the 2nd average score of other expert panels, and adding appropriateness and importance together. The data were analyzed to obtain the mean, standard deviation, interquartile range, CVR, convergence, and consensus. Finally, a total of 69 items were selected and 49 items were excluded so that 105 items for CVR 0.54 or higher, 111 items for convergence degree 0.50 or lower, and 70 items for continuity degree 0.75 or higher. Sexual activity, care of others, care of pets, and child rearing are difficult to apply socially and culturally, driving and community mobility cannot be performed within the clinical room, and home establishment and management may have different roles depending on gender, and religious spiritual activities and expression are so personal. For these reasons, these items were found to have low importance or suitability. This study can be usefully used as an indicator on the activities of daily living training - Korean version in clinic or community setting.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.3
• /
• pp.189-196
• /
• 2022

Plasma refers to an ionized gas that is often referred to as "the fourth phase of matter", following solid, liquid, and gas. Plasma has traditionally been utilized for industrial applications such as welding and neon signs, but its promise in biomedical fields such as cancer treatment and dermatology has lately been recognized. Indeed, due to its beneficial effects in promoting collagen production, improving skin tone, and eliminating harmful bacteria in the skin, plasma treatment constitutes an important target for dermatological research. In this study, a plasma device for cosmetic manufacturing based on nitrogen, the main component of the atmosphere, was designed and assembled. Moreover, nitric oxide (NO) was selected since is easier to follow and evaluate than other nitrogen plasma active species, and its contents were measured to perform a quantitative and qualitative evaluation of plasma. First, an injection method, using different proximities labeled "sinking" and "non sinking" treatments, was performed to test the most efficient plasma treatment method. As a result, it was observed that the formulation obtained by a non sinking treatment was more effective. Furthermore, toner and ampoule were selected as cosmetics formulations, and the characteristics of the formulation and changes in the injected plasma state were observed. In both formulations, the successful injection of NO plasma was 2 times higher in toner formulation than ampoule formulation, and it gradually decreased with time, having dissipated after a week. It was confirmed that the nitrogen plasma used did not affect the stability of the toner and ampoule formulations at low temperature (4 ℃), room temperature (25 ℃), and high temperature (37 ℃ and 50 ℃) conditions. The results of this study demonstrate the potential of plasma cosmetics and highlight the importance of securing the stability of the injected plasma.

• Journal of Naturopathy
• /
• v.11 no.1
• /
• pp.18-30
• /
• 2022

Background: It was to develop an air purification system (APS) using an underground air purification layer to verify the effect of basalt forest's underground air (sumgol) on a volcanic Jeju. Finally, it is necessary to analyze these purified air components and their usefulness to the human body in an air experience center. Purpose: It was to collect basalt forest air, analyze its composition, and explore its effect on the human body. Methods: We APS devices installed at four points in the Papaville area of Jeju. The air discharged from the APS was collected and analyzed the recycling components. An installed experience room filled with negative ions is about 5,000 ions/m³. After allowing the participants to stay for 60 to 120 minutes, we investigated the state of blood vessels. Results: In the analysis of the underground air, the O₂ concentration was 21.18%, which was higher than the average oxygen concentration of 20.94% in the atmosphere. However, Formaldehyde was not detected, and the CO₂ was 419 ppm, which was lower than that of indoor air. The PM2.5 concentration was less than 24 ㎍/m³ and detected anions over 5.000 /m³. The experiencer's vascular states improved, and the increase in pulse rate and stress relief were high. Conclusions: The valuable ingredients identified by analyzing the air were precious for natural healing. The experience results showed that it effectively improved the pulse rate, blood vessels, and stress. These conditions may be highly beneficial as a new area for expanding the basalt lava forest in the Jeju area into the natural healing and wellness industry.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.6
• /
• pp.35-54
• /
• 2021

This study examines the characteristics of CBS's Kim Hyun-Jung's News Show(hearafter News Show) and the change to transmedia. The distinguishing characteristics of News Show compared to radio-based current affairs programs are as follows. First, despite its time limit, it adopts the form of investigative reports or investigative documentaries to uncover the truth of the events through 'Detective Son Su-Ho', etc. Second, News show's interviews have avoided biased stance in the reporting of minority issues by interviewing the affected parties anonymously including people involved in incidents and accidents, bereaved families, and other victims. News Show has been producing a transmedia content called 'That Honey Show' (a show that reads comments as fun as honey) since November 2018. 'That Honey Show' is broadcast in real time on YouTube right after the News Show radio broadcast ends. As a form of spin-off content, 'That Honey Show' breaks down the boundaries among staff, MCs, and guests, as well as shifting roles by using 'vice characters'. The female host, Kim conducts interviews with the main characters related to various issues and extends the fixed identity of current affairs shows to the everyday politics and cultural realms. Thus she draws active participation and responses audience. This paper analyzes two representative broadcast cases of 'That Honey Show'-first, the case of resistance and activity of the BTS fandom ARMY in the US presidential election, and, second, the case of reporting on the Nth room incident. This analysis considers the critical participation of digital citizens and the effect of fostering a sense of community in the current affairs show in the transmedia era.

• The Korea Journal of Herbology
• /
• v.27 no.6
• /
• pp.115-122
• /
• 2012

Objectives : This study evaluated activities and ingredient contents concerning extracts according to extraction solvents of Insampaedok-san (IS, Renshen bai du-san). Methods : The herbal constituents of IS were extracted with water and 70% ethanol at $100^{\circ}C$ for 2 hr. Using the HPLC system, the six ingredient contents of different solvent extracts of IS were analyzed. The nitric oxide (NO), prostaglandin $E_2$ ($PGE_2$) production and proinflammatory cytokines were measured in RAW264.7 cells stimulated with lipopolysaccharide (LPS). The macrophage-derived chemokine (MDC/CCL22) and regulated on activation normal T-cell expression and secreted (RANTES/CCL5) production were measured in HaCaT and BEAS-2B cells stimulated tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$) and interferon-${\gamma}$ (IFN-${\gamma}$). The activities of glycerol-3-phosphate dehydrogenase (GPDH) and leptin level were measured in 3T3-L1 cells. Results : The calibration curves showed good linearity ($r^2$=1.0000) for different concentration ranges. The contents of liquiritin, naringin, hesperidin, neohesperirin and glycyrrizin in 70% ethanol extracts of IS were relatively higher than that of water extract, however the content of ferulic acid in 70% ethanol and water extract of IS were similar. The extraction solvents of water and 70% ethanol were evaluated inhibitory effect on the production of NO, $PGE_2$, TNF-${\alpha}$ and IL-6 in RAW 264.7 cells. Their extractions were inhibitory effect on production of MDC/CCL22 and RANTES/CCL5 in HaCaT cell and BEAS-2B cell, respectively. In addition, evaluated reduced on GPDH activity and leptin level in 3T3-L1 preadipocyte cell. Conclusions : Our results suggest that IS extracts were inhibitory effects of disease such as inflammation, allergies and obesity.