• 건축역사연구
• /
• 제21권2호
• /
• pp.7-20
• /
• 2012

As the corner of wooden pagoda forms the roof by closely bordering left and right eaves on the various purlins and angle rafters, it is designed for every face to be recognized as front whose structure system increases load to bear proportionally. The corner of wooden pagoda is inseparable with the corner bracket set as it becomes stable thanks to the corner bracket set structurally and load burden under restrained structure makes the corner bracket set really important. Accordingly, this study could figure out some facts by analyzing corner bracket sets of Palsangjeon of Beobjusa Temple in Korea, Seokgatap of Bulgungsa Temple in China and Ojungtap of Beobryungsa Temple in Japan which were constructed with pure wooden structure. This study demonstrated that corner bracket set played a pivotal role in keeping balance of concentrated load of corner (corner of opening) in each floor that contributed to the stability of wooden pagoda structurally despite multiple duplications of floors and also figured out the outfit of corner bracket set was subject to the floor type and the cross section of Gongpo installed on top of Pyeongju. Wooden pagodas in 3 countries were two floor types of octagon and square, and employed different connection method between upper and lower floors. The difference between floor and duplication method determines the method of corner, but even different methods were sufficient to have entirety in every side by completing dynamic principle of corner bracket set even though old method had to solve the problem of concentrated load and it also confirms that it was essential Gongpo to prevent any deformation of corner.

• 건축역사연구
• /
• 제28권6호
• /
• pp.43-54
• /
• 2019

The grade of East Asian architecture is generally classified by the size, the shape of the roof, and the type of bracket set. The craftsmanship of columns, beam, purlin, stylobate, column base stone and paintwork is also a contributing factor for such classifications. These classifications can be found not only in historical documents such as 「Oksajo(屋舍條)」 of 『Samguksagi(三國史記)』 but also in 「house details regulations of residential architecture(家舍規制)」 of Joseon Dynasty. However, there are differences in detailed designs among the same grade of architecture regardless of the classification. In this research, the Palace, the Royal Residence(宮家), and the Jaesil(齋室) are considered as the Palatial Buildings and Royal Residences. And the advanced architectural o details which appear only in the Royal Architectures are defined as the 'The Architectural Crafts as a Code of Manners'. The Architectural Crafts as a Code of Manners is detailed design, which can be seen as fabrication of materials and supplementary factors. The Architectural Crafts as a Code of Manners used in the Palatial Buildings and Royal Residences reveal the types and their historical changes. This research will present a basis for the repair and restoration of cultural heritages to be carried out in the future, and also prevent them from further damages, thus help to preserve the cultural heritages.

• 한국주거학회논문집
• /
• 제20권3호
• /
• pp.11-18
• /
• 2009

The purpose of this study is to propose a method of developing an improved Hanok. To achieve this, an investigation was carried out on the factors of the main floor plan in the improved Hanok development and an interview was conducted with residents who live in the improved Hanok development. The conclusions obtained through this study are as follows: First, The shape of 一 was marked at the highest in the Korean traditional plan types such as 一, ㄱ and 田. It is considered that this reduces the cost of construction by simplifying the structure of the roof. Second, the size was consisted of $5{\times}3$ Kan, the Korean traditional module that determines the number of columns and expresses the position of the inner wall. However, the Kan measure ments for the bathroom and multi-purpose room differed. Third, 57.6% of the 2 bedroom units were investigated. However, 60% of the residents preferred 3 bedroom units. Fourth, the results of the relationship between the living room and the kitchen showed that the residents preferred L+DK type to LDK type by 54.2% and 45.8% respectively. Fifth, the residents preferred a bathroom constructed next to the bedroom because they considered that the improved Hanok development would be used as an Inn during holiday periods. Moreover, they desired a plan where the bathroom could be directly entered from the outside. Sixth, the design for the improved Hanok development should have a suitable multipurpose-room because 72.5% of the residents have extended their house to accommodate such a room. Seventh, 61% of the improved Hanok units had an entrance space, which does not exist in Korean traditional houses. For this reason, the Korean traditional floor (: the Maru) was avoided due to its inconvenience.

• 한국축산시설환경학회지
• /
• 제2권2호
• /
• pp.103-110
• /
• 1996

This survey was conducted to investigate the situation of three types of laying hen houses and farmers' awareness of farm automation. Six windowless, three high-rising windowless and four open-sided laying hen houses were surveyed to compare their characteristics, and sixty farmers answered questionnaires. 1. Population density of laying hen was 13.9 birds/m^2$ in open-sided, 28.9 birds/m^2$ in high-rising windowless, and 44.9 birds/m^2$ in windowless laying hen houses. 2. Feeder space was $12{\sim}13.5cm$ in open-sided laying hen houses, but feeder space of windowless and high-rising hen houses was narrower than that of open-sided laying hen houses. 3. Thermal resistance values were $14.6{\sim}18.7\;m^2\;{\circ}C/W$ in wall, #22.0{\sim}23.7\;m^2\;{\circ}C/W$ in roof of windowless and high-rising windowless laying hen houses but the wall of open-sided laying hen houses was only $1.9\;m^2\;{\circ}C/W$. 4. Maximum ventilation capacity was 0.161{\sim}0.326$ cmm/bird in summer. Minimum rate of tunnel Ventilation laying hen houses in winter was $0.013{\sim}0.040$ cmm/bird, but minimum rate of crossflow and high-rising windowless laying hen houses was larger than that of tunnel ventilation houses. 5. One person managed about 8,100 birds in open-sided, and about 23,500 birds in windowless and high-rising windowless laying hen houses. 7. 90.7% of farmers responsed that they want to construct automatized laying hen houses in the future.

• 한국공간구조학회논문집
• /
• 제18권2호
• /
• pp.79-86
• /
• 2018

Unlike other types of outdoor advertisements, rooftop signboards are installed on the roofs of buildings, rather than on their outer walls. This means that the area of a rooftop signboard is commonly larger than that of a general outdoor signboard. Moreover, as such signboards are greatly influenced by the wind, they can suffer a lot of damage from typhoons and strong winds every year. However, there is no wind load specification for rooftop signboards. In this study, wind pressure experiments were conducted to investigate the peak wind pressure on each side of rooftop signboards installed on the roofs of 5-15 story buildings in a city center. The minimum peak wind pressure coefficient was -3.0 at the bottom edges of the front and back of the rooftop signboards and -2.0 along the entire length of the sides. As the height of the rooftop signboard increased with the increasing height of the buildings, the peak value was found to be larger than the absolute peak value for the minimum peak wind pressure coefficient. The maximum and minimum peak wind pressure distributions of the rooftop outdoor signboards were influenced by the position of the signboard and the wind angle.

• 건축역사연구
• /
• 제20권1호
• /
• pp.23-39
• /
• 2011

The Sungnyemun roofing tiles were twice disassembled for maintenance work, in 1963 and 1997, and modern tiles were applied in 1997. However, besides differing in visual appearance, the modern tiles had distinctly different physical properties. A study has been carried out on 22 different tiles, including original Sungnyemun tiles, modern tiles applied during maintenance, traditional tiles made by tile-makers, and others, to examine their physical properties, such as bending strength, frost resistance, absorption, whole-rock magnetic susceptibility, chromaticity, differential thermal analysis, and other characteristics. Since the method of making modern tiles involves compressing clay in a vacuum, modern tiles showed relatively greater bending strength and specific gravity, while Sungnyemun tiles and those made by tile-makers, in comparison, demonstrated less bending strength and specific gravity owing to their production method of 'treading,' in which clay is mixed by having someone tread upon it repeatedly. Over time, the absorption rate of the original tile used for Sungyemun gradually decreased from 21% to 14.7%; traditional tiles from tile-makers showed absorption rates of 17%, while the absorption rate of modern tiles was just 1%, which is significantly low. As for frost resistance, Sungnyemun tiles and traditional tiles from tile-makers showed cracking and exfoliation after being subjected to testing 4 or 5 times, while slight cracking was seen on the surface for modern tiles after 1ngy, or 3 times. In other words, no significant difference from influence by frost was found. According to the results of differential thermal analysis, the plastic temperature was shown to have been no less than 1, $on^{\circ}C$ for all types of tile, and cristobalite was measuredthrough XRD analysis from a Sungnyemun female tile applied during maintenance in 1963, which appeared to have been plasticized at between $1,200^{\circ}C{\sim}1,300^{\circ}C$. Based on these research results on the physical properties of tiles from the Sungnyemun roof, a fundamental production method for tiles to be applied in the restoration of Sungnyemun has been identified.

• 한국재난정보학회 논문집
• /
• 제13권4호
• /
• pp.537-549
• /
• 2017

목조주택은 전통한옥, 현대한옥, 경골목구조, 중목구조 등으로 분류된다. 최근 국내에서 가장많이 건축되고 있는 경골목구조는 외국의 문화이며 전통한옥인 우리문화와 서로 잘 조화롭지 못하여 본 연구에서는 이러한 문제점을 개선하기 위해서 한옥과 현대 목조주택의 디자인 특성에 대해서 분석하고자 한다. 분석한 디자인 특성은 우리나라 한국적 목조 양식과 생활양식에 맞는 미래의 목조 건축의 발전에 크게 기여할 것으로 생각된다. 연구는 공간분석, 평면분석, 구조 시스템 분석, 지붕의 형태 분석, 미학적 분석 등으로 이루어진다. 전통한옥과 현대에 대한 디자인 특성을 분석한 결과로부터 한국형 중목구조 주택의 내외부의 모습과 모듈화요소를 제안하고 평면설계 및 지붕 벽체상세의 개발방향을 제안하였다.

• 화훼연구
• /
• 제19권1호
• /
• pp.1-7
• /
• 2011

본 연구는 나리 하계 고온기 고품질 절화생산 및 경영비 절감을 위한 도입 소구의 비대증식에 유리한 환경조건을 찾아내기 위해 수행하였다. 종구비 절감을 위해 소구를 도입하여 양구하는데 효과적인 환경조건을 찾아내고자 재배형태를 비가림, 망실, 무피복으로 나누고 다시 절화 재배시 많이 사용하는 30% 차광처리와 무처리로 구분하여 시험하였다. 모든 처리구에서 비가림 재배가 우수하였고 차광의 효과도 다소 있었다. 특히 양구에 있어서는 대관령 등의 고랭지에서 주간과 야간온도의 차이가 커서 동화산물의 전류 및 축적이 많아 평지에 비해 구비대가 유리하여 시비 및 관수방법에 따라 보통 3년 정도인 양구 기간을 단축할 수도 있을 것으로 기대된다.

• 한국기후변화학회지
• /
• 제2권3호
• /
• pp.191-201
• /
• 2011

본 연구는 전 지구적 문제인 기후변화에 대응하기 위해 하천, 산림 등의 자연 지역과 공원, 녹지 등의 오픈스페이스 등을 녹색기반시설이라는 개념으로 통합하고, 이를 완화와 적응의 관점에서 녹색기반시설이 기후변화에 어떻게 효과적으로 대응할 수 있는지에 대한 연구를 실시하였다. 연구의 결과, 산림, 공원, 녹지, 텃밭, 옥상농장, 자전거로, 보행로 등의 녹색기반시설은 1) 탄소의 저감과 격리, 2) 화석연료 대체, 3) 원자재 대체, 4) 식량 생산, 5) 차량 이동의 감소 등을 통해서 기후변화를 완화시킬 수 있다. 둘째, 하천, 가로수, 저류지, 습지, 사구, 바람길 등의 녹색기반시설은 1) 폭염완화, 2) 물 공급 조절, 3) 강 범람 조절, 4) 해안 범람 조절, 5) 지표수 조절, 6) 토양 침식 감소, 7) 생물종 적응에 도움 등을 통해서 기후변화 적응의 역할을 할 수 있다.

• 대한건축학회논문집:계획계
• /
• 제33권12호
• /
• pp.105-112
• /
• 2017

Through various media, damage of both smoking and second-hand smoking has been recognized, and brought global scale of interest in antismoking. In Korea, government has tightened regulations of smoking in non-smoking zone since December, 1980, and after National Health Promotion Act in 1995, non-smoking zone has been gradually expanded. On the other hand, there were law suits to find those regulation towards smokers are either unconstitutional or not for 4 times. In this current state, people need smoking area to prevent second-hand smoking and to consider smokers in multi-unit dwelling. Main purpose of this research is to plan smoking spaces based on various typology of multi-dwelling plan for protection of both smokers and non-smokers' right. The research group collected and analyzed the smoking behaviors in various multi-unit dwelling types such as flat type, tower type, hybrid type and others. Based on those data, the group found three phenomena. First, there are internal regulations in multi-unit dwelling to make non-smoking zone based on National Health Promotion Act and resident representative meeting decision. Second, main smoking activities are occurring at major traffic line and entrances. Third, smoking inside of multi-unit dwelling complex causes second-hand smoking to residents live in $1^{st}$ floor and when they enter. Therefore, one can achieve both smokers' and non-smokers' protection of right by creating a designated smoking space near main entrances of multi-unit dwelling complex to consider smokers' and prevents second-hand smoking by using shaft space, which is in core space, to ventilate tobacco smoke through roof.