• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1627-1633
• /
• 2004

Safety and punctuality in the subway are considered as critical factors. This system is composed of many factors like signals, rails, electrical power sources, rolling stocks. The effective inspection should be carried out at all the times for the safety and punctuality. Purpose of the rolling stocks maintenance is to offer the optimum condition of vehicles, and minimize the maintenance expenses. This paper suggests appropriate maintenance period of rolling stocks to enhance the utility efficiency in SMSC.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.388-397
• /
• 1998

This paper gives the way of analyzing internal noise of rolling stocks which is urgently required by civilians. Triangular beam method among ray tracing techniques is utilized to compute noise distribution of rolling stocks. Noise source and transmisstion loss of several sections from experimental work are included in this calculation. Ray tracing technique is found useful to compute big structures like rolling stocks.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.859-864
• /
• 2007

The rolling stock which is used the most frequently by public transportation has to secure reliability and safety. In these, vibration is the important factor which causes of serious problem of rolling stock. By the way, rolling stocks vibration test specific activity that is using translating JIS standard is serious mistake, but it is actuality that is used until present more than ten years. Study wishes to analyze problem of standard of domestic rolling stocks and present countermeasure.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.191-198
• /
• 2009

There are almost no studies on verification of requirements for high speed rolling stocks by means of RAM goals and on setting RAM goals by means of verification on practical reliability, availability and maintainability for high speed rolling stocks though they are covered in specification of an order that RAM goals asked of rolling stocks are shown for gaining high quality of them and availability when they are in operation. This study is for estimating number of high speed train-sets that would be supplementarily placed an order through verification of RAM goals of a project for the introduction of KTX-II 100 cars. It verify that optimized requirements for high speed rolling stocks by relatively comparison with between requirements for train-sets through setting RAM goals and requirements for train-sets through analysis of prospects for management balance with high speed rolling stocks.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.505-511
• /
• 1998

Production technologies for aluminum rolling stocks are mainly related to welding of aluminum alloys. Automatic welding of extrusion profiles and control of welding deformations are the important contents of the production technologies. Another production technology other than welding is the technique for surface treatment of aluminum carbody. In this paper, problems caused during construction of the test carbody are described and the remedies for the problems are suggested. The accumulated experiences and systematic data will be helpful for the mass production of aluminum rolling stocks in the furture.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.198-205
• /
• 2009

일반적으로 철도차량은 획득비용보다 운영 유지보수비용이 높다는 것이 알려져 있다. 운영 유지보수비용의 절감을 위해서는 운영 유지보수 비용 측면에서 효율적으로 설계된 철도차량을 획득하는 것이 매우 중요하다. 따라서 철도차량의 획득단계에서부터 운영 유지보수비용을 포함한 수명주기비용을 고려하는 것이 필요하다. 본 연구는 철도차량의 획득단계에서 수명주기비용을 고려하기 위한 절차 및 수명주기비용 모형을 제시한다.

• 시스템엔지니어링학술지
• /
• 제4권1호
• /
• pp.31-34
• /
• 2008

As a supply contract for 100 new high-speed rolling stocks(KTX-II) was made 8th June 2006, System Engineering process has been applied to introduce the high-speed rolling stocks successfully and to manage the total life cycle systematically from Pre-concept Phase, Contract Phase, Preliminary and Critical Design Review, Production, Test and Verification, Acceptance and Operation to assurance for a flaw.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.489-496
• /
• 1998

Although the surface of aluminum alloy has good corrosion resistance property, the surface of the aluminum rolling stock should be painted for good appearance and protection of the body. For better painting of the aluminum carbody, the surface must also be well pretreated. In this paper, painting process of the aluminum rolling stock is described and the test results of the painted surface is presented. As accumulated data concerning to the painting technology for the aluminum rolling stocks are absent in our country, the presented test results will be helpful for mass production of aluminum rolling stocks in the near future.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2626-2631
• /
• 2011

In recent carbody design of rolling stocks, the development of a new carbody structure rather than designing the carbody structure by applying a proven new way to design the carbody structure has been applied. Structural requirements of the carbody being equal, the same applies to the carbody structure means that it is possible to design a carbody structure. By kinematic envelope & speed and the environment, etc., the carbody design is in progress. Accordingly, if all conditions are the same as the existing carbody structure by the same criteria is that you can go get the same. Rather than developing a new carbody structure, carbody structure by applying proven that safety is secured is made possible. Proven standard model of the carbody structure of rolling stocks to secure a new carbody design has made it possible to apply. In addition, the size of the different carbody but structural requirements are the same body design is easier to be expected. In this paper, a model standard carbody of rolling stocks is chosen and of a new carbody design that can be applied to the carbody design will attempt to demonstrate the case.

• 한국철도학회논문집
• /
• 제13권3호
• /
• pp.257-263
• /
• 2010

일반적으로 철도차량의 운영 유지보수 비용은 구입비용보다 높다. 따라서 철도차량의 수명주기비용(LCC)을 낮추기 위해서는 운영 및 유지보수가 용이하고 비용이 적게 드는 차량이 설계되고, 효과적이고 효율적인 운영 유지보수 지원 시스템이 공급되어야 한다. 이를 위해서 운영사는 획득초기단계에서 LCC 요구사항을제시하여 LCC가 낮은 철도차량이 설계되고 제작될 수 있도록 해야 한다. 본 연구에서는 운영사가 차량의 구매사양을 공고하고 제작사가 차량을 제작하여 공급하는 일반적인 차량의 획득절차에서 운영사와 제작사의 LCC업무 및 절차를 제시한다. 또한 이 때 사용될 수 있는 검증 가능한 LCC 산출모형을 제시한다.