• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 추계학술대회
• /
• pp.239-240
• /
• 2009

Vessels stability problems need to resolve the nonlinear mathematical models of rolling motion. For nonlinear systems subjected to random excitations, there are very few special cases can obtain the exact solutions. In this paper, the specific differential equations of rolling motion for intact ship considering the restoring and damping moment have researched firstly. Then the partial stochastic linearization method is applied to study the response statistics of nonlinear ship rolling motion in beam seas. The ship rolling nonlinear stochastic differential equation is then solved approximately by keeping the equivalent damping coefficient as a parameter and nonlinear response of the ship is determined in the frequency domain by a linear analysis method finally.

• 한국항해항만학회지
• /
• 제40권6호
• /
• pp.361-368
• /
• 2016

부유체의 횡동요는 승조원의 피로를 누적시키고, 심지어 구조물 전체를 전복시키기 까지 하고, 또 선체에 반복적인 외력을 가하는 등 부유체의 안정성과 구조물의 안전에 심대한 영향을 끼친다. 그래서 거의 모든 선박의 경우에는 빌지킬을 설치하여 횡동요를 감소시키고 있고, 특수한 경우에는 안티롤링 탱크나 핀 스태빌라이저나 자이로스코프 등을 설치하여 횡동요를 줄이고 있다. 그러나 안티롤링 탱크는 설치하는데 용적을 많이 차지하고, 핀 스태빌라이저나 자이로스코프는 설치비와 유지 관리비가 많이 든다. 본 연구에서는 안티롤링 진자를 이용하여 부유체의 횡동요를 줄이고자 한다. 보통 단진자라고 하면 질량체를 끈으로 어디엔가 고정시켜 놓고 자유롭게 흔들리는 구조를 말한다. 여기에서는 통상의 진자 대신에 진자를 원궤도에 올려놓아서 단진동 운동을 하도록 하는 원리를 이용한다. 제안한 장치를 실험선에 적용하여 그 효능을 입증하였다. 안티롤링 탱크의 약 1/8의 중량과 약 1/6의 용적을 가진 안티롤링 진자를 이용하여 이것보다 더 좋은 효과를 낼 수 있음을 확인하였다. 여기에 더하여 선체에 안티롤링 진자를 부가한 모델의 선형운동방정식과 비선형 운동방정식을 제시하였다.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.176-187
• /
• 2005

This paper presents an evaluation of joint configurations of a robotic finger based on kinematic analysis. The evaluation is based on an assumption that the current control methods for the fingers require that the contact state specified by the motion planner be maintained during manipulation. Various finger-joint configurations have been evaluated for different contact motions. In the kinematic analysis, the surface of the manipulated object was represented by B-spline surface and the surface of the finger was represented by cylinders and a half ellipsoid. Three types of contact motion, namely, 1) pure rolling, 2) twist-roiling, and 3) slide-twist-rolling are assumed in this analysis. The finger-joint configuration best suited for manipulative motion is determined by the dimension of manipulation workspace. The evaluation has shown that the human-like fingers are suitable for maintaining twist-rolling and slide-twist-rolling but not for pure rolling. A finger with roll joint at its fingertip link, which is different from human fingers, proved to be better for pure rolling motion because it can accommodate sideway motions of the object. Several kinds of useful finger-joint configurations suited for manipulating objects by fingertip surface are proposed.

• 한국해양공학회지
• /
• 제6권2호
• /
• pp.41-45
• /
• 1992

In this paper an application technique of moment equation method to solution of nonlinear rolling equation of motion of ships is investigated. The exciting moment in the equation of rolling motion of ships is described as non-white noise. This non-white exciting moment is generated through use of a shaping filter. These coupled equations are used to generate moment equations. The nonstationary responses of the nonlinear system are obtained. The results are compared with those of a linear system.

• Journal of Biosystems Engineering
• /
• 제30권2호
• /
• pp.69-74
• /
• 2005

This study was carried out to investigate experimentally the effect of the ground condition and tire inflation pressure on rolling characteristics of towed wheel, including the deformation, sinkage, effective rolling radius and motion resistance of tire. The experiment was performed at soil bin for the three levels of off-road conditions(ground-I, ground-II and ground-III) and a on-road condition(ground-IV), and for the four levels of tire inflation pressure which were 80 kPa, 160 kPa, 240 kPa and 320 kPa. The results of this study are summarized as follows: 1. As the tire inflation pressure of towed wheel increased, the tire deformation decreased exponentially, but the tire sinkage increased exponentially. This trend was getting bigger as ground condition was getting softer. 2. The increase of tire inflation pressure increased the effective rolling radius of towed wheel, and this kind of trend occurred greatly as ground condition was soft. As a result, the effective rolling radius for the off-road condition was always larger than that for on-road condition. 3. For the on-road condition, as the tire inflation pressure of towed wheel increased, the motion resistance decreased, but for the off-road condition, augmentation of tire inflation pressure increased the motion resistance. Also, the effect of inflation pressure on motion resistance appeared great as ground condition was soft. Therefore, in order to improve the tire performance by the control of inflation pressure, it is desirable to reduce the tire inflation pressure for off-road condition and to increase the tire inflation pressure for on-road condition.

• 한국항해항만학회지
• /
• 제27권5호
• /
• pp.459-464
• /
• 2003

강제 횡동요 실험을 통하여 동요하는 탱크의 내부압력을 폭정하고, 탱크의 내부압력을 추정하는 간단한 이론식을 제시하였다. 청수로 채워진 사각 탱크를 동요실험에 사용하였으며, 탱크의 안쪽 벽과 바닥에 압력게이지를 설치하여 내부압력의 시간변화량을 측정하였다. 측정된 탱크의 내부압력의 실험값과 이론식을 이용한 계산값을 비교하였다. 횡동요 하는 탱크내부의 압력을 구하기 위해 압력중심을 고려하여 추정하는 방법을 연구하였다.

• 공업화학
• /
• 제22권6호
• /
• pp.642-647
• /
• 2011

회전형 휘발성 산화장치(voloxidizer)와 200 g $U_3O_8$ 분말을 사용하여 초기 미세 입자층의 운동형태, 열처리 온도 및 시간, voloxidizer의 회전속도에 따른 다공성 그래뉼의 회수율과 특성을 분석하였다. 초기 미세 입자층의 운동형태에 따른 1 mm 이상의 그래뉼의 회수율은 rolling 운동 때보다 slumping 운동일 경우에 보다 높았다. 초기 미세 입자층이 rolling 운동형태인 경우에는 미세입자로부터 그래뉼이 생성됨에 따라서 slumping 운동형태로 변하며 slumping 빈도가 매우 높았다. 열처리 온도의 증가 및 10 h까지는 시간의 증가에 따라서 그래뉼의 회수율이 매우 크게 증가하였다. Slumping 운동형태를 보이는 초기 미세 입자층의 경우에 voloxidizer의 회전속도가 증가함에 따라서 그래뉼의 회수율 은 81.5에서 88.7%로 증가하였으나, 그래뉼 특성 측면에서 보면 회전속도가 2 rpm인 경우에 밀도, 파쇄강도, 구형도가 가장 높았다.

• Journal of Yeungnam Medical Science
• /
• 제7권2호
• /
• pp.103-108
• /
• 1990

기능적전기자극(FES)을 이용하여 중추신경장해환자의 체간제어를 행하는 방법을 고안하여 체간제어에 필요한 각 각의 관절운동을 실현시켜 보았다. 건강인에게 전기자극실험을 행하고 기능적전기자극애 의해 체위변환의 실현가능성을 검증했다. 또한 상지를 함께 이용한 체위변환시의 근전도를 해석하여 보다 적절한 체위변환의 방법을 검토했다.

• Ocean Systems Engineering
• /
• 제1권3호
• /
• pp.249-261
• /
• 2011

The stochastic nonlinear dynamic behavior and probability density function of ship rolling are studied using the nonlinear dynamical systems approach and probability theory. The probability density function of the rolling response is evaluated through solving the Fokker Planck Equation using the path integral method based on a Gauss-Legendre interpolation scheme. The time-dependent probability of ship rolling restricted to within the safe domain is provided and capsizing is investigated from the probability point of view. The random differential equation of ships' rolling motion is established considering the nonlinear damping, nonlinear restoring moment, white noise and colored noise wave excitation.

• 한국항해학회지
• /
• 제13권2호
• /
• pp.23-36
• /
• 1989

Marine casualities in the high sea are mainly classified into the breakage of hull and capsize , of which the latter occurs frequently to a small craft and container vessels by extreme rolling. The aim of this study is to develop shiphandling techniques for the prevention of ship's large rolling by way of evaluating dangerous degree of rolling in heavy weather. In this study, rolling motion is analized by using statistical method as follow : (1) 8 sample ships is presented for calculation. (2) Analized sea state are Beaufort scale 7 and 10 (wind velocity 30kts and 50kts respectively) and significant wave height is put as 5.2m and 11.2m. (3) The formula recommended by International Towing Tank Conference (ITTC) is used to calculated the wave spectrum. The results of this study are as follow : The results of this study are as follow : (1) Most of the vessels with beam of 20 meters or less was found to be capized in the waves abeam under the sea condition of Bearfort scale7(30kts). (2) For the vessels range 20m to 30m was found safe under the sea conditions of Bearfort scale 7(30kts) and imminent danger under the sea condition of Beaufort scale 11(50kts). (3) It is proved that any vessel could be capsized by heavy rolling regardless of vessel's size whenever the motion is synchronized with waves abeam. This study concludes that the navigator, especially at night , must anticipate the exact wave direction, referring to the wether report and coastaline, not to lay the vessel in the serial wave abeam.