• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제35회 하계학술대회 초록집
• /
• pp.313-313
• /
• 2008

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2008년도 춘계학술발표대회 및 제14회 신소재 심포지엄
• /
• pp.19.2-19.2
• /
• 2008

• 한국정보처리학회논문지
• /
• 제6권1호
• /
• pp.216-224
• /
• 1999

날로 더욱 복잡해지는 제어 컴퓨터의 고 신뢰성 확보를 위해 시간여분(time redundancy)의 일종인 rollback과 roll-forward 기법 등을 TMR 구종에 적절하게 혼용하는 두 가지 방법을 제안한다. Rollback과 roll-forward 기법은 약간의 추가시간만을 사용하여 재구성(reconfiguration) 없이도 일시적인 결함(fault)에 의해 발생한 TMR 고장(failure)의 회복을 위해 상호보완적으로 사용될 수 있다. 본 논문은 시스템의 고장상태확률의 유도를 통해 전체 작업의 평균실행시간이 최소가 되는 최적의 checkpoint 간격벡터를 유도한다. 수치예제를 통해 제안된 방법들이 다른 고장회복 기법을 적용했을 때와 비교하여 매우 효과적임을 보이고, 다양한 환경 하에서 여러 가지 최적의 checkpoint 간격벡터를 유도하였으며, 시뮬레이션을 통한 정량적 결과로써 그 우수성을 비교하고 검증하였다

• Progress in Superconductivity
• /
• 제14권2호
• /
• pp.82-86
• /
• 2012

A sensitive eight-channel high-Tc Superconducting Interference Device (SQUID) detection system for magnetic contaminant in a lithium ion battery anode was developed. Finding ultra-small metallic foreign matter is an important issue for a manufacturer because metallic contaminants carry the risk of an internal short. When contamination occurs, the manufacturer of the product suffers a great loss from recalling the tainted product. Metallic particles with outer dimensions smaller than 100 microns cannot be detected using a conventional X-ray imaging system. Therefore, a highly sensitive detection system for small foreign matter is required. We have already developed a detection system based on a single-channel SQUID gradiometer and horizontal magnetization. For practical use, the detection width of the system should be increased to at least 65 mm by employing multiple sensors. In this paper, we present an 8-ch high-Tc SQUID roll-to-roll system for inspecting a lithium-ion battery anode with a width of 65 mm. A special microscopic type of a cryostat was developed upon which eight SQUID gradiometers were mounted. As a result, small iron particles of 35 microns on a real lithium-ion battery anode with a width of 70 mm were successfully detected. This system is practical for the detection of contaminants in a lithium ion battery anode sheet.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.715-718
• /
• 2002

As the modern technology of continuous casting plant is focused on improvement of slab quality, the control system of strand driven roll which has positive effect is investigated in this paper. An irregular distribution of withdrawal force gives rise to horizontal crack in high and middle grade carbon steel. Based on the basic understanding on design concept of high technology company, monitoring the withdrawal force distribution of strand driven roll and analysis of the control system was Performed at continuous casters of POSCO. The control algorithm of withdrawal force distribution for A.C motor vector control, which was derived from above study and had been applied for POSCO Kwangyang 1-4 continuous casting plant, is presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.665-666
• /
• 2011

• 해양환경안전학회지
• /
• 제27권2호
• /
• pp.211-218
• /
• 2021

본 연구는 종방향과 횡방향에서 규칙파가 외란으로 입사하는 선박의 종동요 및 횡동요를 억제하는 문제를 다룬다. 선박의 안전 운항을 위해서 파랑 중 선박의 종동요 및 횡동요를 안정화시키는 것은 필수적인 과제로 여겨진다. 종동요 및 횡동요 거동에서 중요한 특징 중에 하나는 공진인데, 이 현상은 특정한 조건에서 예상치 못한 큰 응답을 초래한다. 종동요와 횡동요는 두 운동이 상호 결합되어 있고 복원항이 강한 비선형을 갖고 있음으로 계의 파라미터에 따라 다양한 동적 거동을 보이는 것이 중요한 특징인데, 특히 종동요에서 이 특성이 두드러지게 나타난다. 무엇보다, 선박의 조종성능 및 안전을 위해 선박의 종동요 가속도 응답을 완전히 억제하는 것은 상당히 도전적인 과제이다. 이 연구에서는 준 슬라이딩 모드 제어 기법을 이용하여 종동요와 횡동요를 줄임으로 파랑 중의 선박을 안정적인 직립 상태로 유지시키고, 아울러 채터링을 감소시키는 목적을 달성하였다. 리아프노프 이론으로 준 슬라이딩 모드 제어의 안정성을 판명하였고, 수치 시뮬레이션으로 제어 방식의 유효성을 증명하였다. 제시한 기법으로 종동요 및 횡동요 응답의 수렴 및 채터링 감소라는 두 가지 목표가 효과적으로 달성되었다.

• 대한조선학회논문집
• /
• 제42권1호
• /
• pp.10-17
• /
• 2005

Due to emission of vehicles during loading/unloading, ventilation system in Roll-on/Roll-off ship is inevitable; however it is very difficult to predict the ventilation performance before it is finally built in. Although the requirements for the ventilation system include air change rate and maximum allowable concentration of CO in the cargo holds, even prototype tests are hardly able to quantify the ventilation performance. In the present paper, a new method to assess the ventilation performance of Roll-on/Roll-off ship is proposed by using computational fluid dynamics. The air exchange is modeled by introducing multi-species transport of existing air In the holds and new air from the ventilation system. Conservation of multi-species as well as 3D Navier-Stokes equation are solved numerically in time dependent manner. Several cases of different configuration are considered. The results include predicted mass fraction of new air in the holds. It is also presented that CO concentration can be estimated based on the predicted air change performance. Due to the lack of experimental data, the computed results are not verified; however the proposed method can be applied as au assessment tool.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2718-2722
• /
• 2008

The Roll-to-Roll system including continuous flexible thin materials and roller has its wide range of applications especially in the electronic printing industry. The industry is growing rapidly and the printing speed is also improving. However, the printing machine based on web and roller system has it own problem. As the web speed increases, the failure to wet the surface may occur and the air entrains between the liquid and the paper web. Air bubbles may remain attached to the paper web causing defects on product surface. With the development of image processing technique, the air airflow around the web and rolls can be visualized and calculated by PIV method. In our experiment, the simple web and rolls system is used to R2R simulator. The flow field is studied at various web speeds and positions. The result shows that the flow field has complicated structure with turbulent characteristic and the main trend of flow is obtained by taking time average of flow field.

• 드라이브 ㆍ 컨트롤
• /
• 제15권3호
• /
• pp.43-48
• /
• 2018

The hydraulic control valve, used in the CPB (cold-pad-Batch) cold dyeing system, passes through a pressurized material that absorbs the dye. The hydraulic control of the hydraulic control panel shall be driven in a uniform and precisely controlled manner, as it interferes directly with the dyschromatism. In this study, an acceleration test model was employed to verify the durability of the hydraulic control of the hydraulic control panel, which was manufactured by the scenic model, and the pre-roll angle was analyzed before the performance of acceleration test. Based on the change in the amount of deformation of the padder roll the durability of the padder roll was analyzed along with verification of the durability of the skin and the rubber coating in contact with the fabric. Furthermore, the accelerated test method used for hydraulic controlled multi-cell padder rolls was verified.