• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.113.1-113.1
• /
• 2011

PEMS (printed electro-mechanical system) is fabricated by means of various printing technologies. Passive and active compo-nents in 2D or 3D such as conducting lines, resistors, capacitors, inductors and TFT(Thin Film Transistor), which are printed withfunctional materials, can be classified in this category. And the issue of PEMS is applied to a R2R process in the manu-facturing process. In many electro-devices, the vacuum process is used as the manufacturing process. However, the vacuum process has a problem, it is difficult to apply to a continuous process such as a R2R(roll to roll) printing process. In this paper, we propose an ESD (electro static deposition) printing process has been used to apply an organic solar cell of thin film forming. ESD is a method of liquid atomization by electrical forces, an electrostatic atomizer sprays micro-drops from the solution injected into the capillary with electrostatic force generated by electric potential of about several tens kV. ESD method is usable in the thin film coating process of organic materials and continuous process as a R2R manufacturing process. Therefore, we experiment the thin films forming of PEDOT:PSS layer and active layer which consist of the P3HT:PCBM. The organic solar cell based on a P3HT/PCBM active layer and a PEDOT:PSS electron blocking layer prepared from ESD method shows solar-to-electrical conversion efficiency of 1.42% at AM 1.5G 1sun light illumination, while 1.86% efficiency is observed when the ESD deposition of P3HT/PCBM is performed on a spin-coated PEDOT:PSS layer.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.116.1-116.1
• /
• 2011

Materials with a combination of high electrical conductivity and optical transparency are important components of many electronic and optoelectronic devices such as liquid crystal displays, solar cells, and light emitting diodes. In this study, to fabricate a low-resistance and high optical transparent electrode film for organic photovoltaic, the following steps were performed: the design and manufacture of an electroforming stamp mold, the fabrication of thermal roll imprinted (TRI) poly-carbonate (PC) patterned films, the manufacture of high-conductivity and low-resistance Ag paste which was filled into patterned PC film using a doctor blade process and then coated with a thin film layer of conductive polymer by a spin coating process. As a result of these imprinting processes the PC films obtained a line width of $10{\pm}0.5{\mu}m$, a channel length of $500{\pm}2{\mu}m$, and a pattern depth of $7.34{\pm}0.5{\mu}m$. After the Ag paste was used to fill part of the patterned film with conductive polymer coating, the following parameters were obtained: a sheet resistance of $9.65{\Omega}$/sq, optical transparency values were 83.69 % at a wavelength of 550 nm.

• 한국표면공학회지
• /
• 제30권4호
• /
• pp.272-280
• /
• 1997

The Thermal Barrier Coation(TBC) to improve the that barrier and wear resistant propenrty in high temperature ofthe aircraftength between the accumlation of the aircraft engine and the automobile engine has usually the two layer structure. One is a creamic top layer for heat insulation and the other is a metal bond layer to facilitate the bond strength between the top ceramic layer and the substrate. But, the coated layers should be peeled off because of the accumulation of the thermal stress by the differance of the thermal expantion coefficient between metal and ceramics in a hrat cyclic environment. In this study, the intermediate layer by plasm spray process was introduced to reduce the thermal stress. The powders of plasm spray coating were the Yttria Stabilized Zirconia (YSZ), the Magnesia Stabillized Zirconia(MSZ) and NiCrAlY. the intermediate layer was sprayed with the powders of the bond cast for the purpose of test were executed. The high temperature wear resistance tends to decreasnceee wear and thermal shock test were exeucuted. The high temperature were resistance of the YSZ TBC is better that of the MSZ TBC. The wearrsistance tends to decrease accoring to incresing the temperature between $400^{\circ}C$to $600^{\circ}C$. The thermal shock life of the 3 layer TBC with YSZ top casting was the most outstanding thermal shock rsisstasnce. This means that the intermediate layer should play an importnat roll to alleviate the diffrerence of the thermal expansion coef frcients between metallic layer and cermics layer.

• Corrosion Science and Technology
• /
• 제14권5호
• /
• pp.213-217
• /
• 2015

Recently, household electronic industries require environmentally-friendly and highly functional steels in order to enhance the quality of human life. Customers especially require both excellent corrosion and abrasion resistant anti-fingerprint steels for digital TV panels. Thus POSCO has developed new functional electro-galvanized steels, which have double coated layers with organic-inorganic composites on the zinc surface of the steel for usage as the bottom chassis panel of TVs. The inorganic solution for the bottom layer consists of inorganic phosphate, magnesium, and zirconium compounds with a small amount of epoxy binder, and affords both improved adhesion properties by chemical conversion reactions and corrosion resistance due to a self-healing effect. The composite solution for the top layer was prepared by fine dispersion of organic-inorganic ingredients that consist of a urethane modified polyacrylate polymer, hardener, silica sol and a titanium complex inhibitor in aqueous media. Both composite solutions were coated on the steel surface by using a roll coater and then cured through an induction furnace in the electro-galvanizing line. New anti-fingerprint steel was evaluated for quality performance through such procedures as the salt spray test for corrosion resistance, tribological test for abrasion resistance, and conductivity test for surface electric conductance regarding to both types of polymer resin and coating weight of composite solution. New composite coated anti-fingerprint steels afford both better corrosion resistance and abrasion properties compared to conventional anti-fingerprint steel that mainly consists of acrylate polymers. Detailed discussions of both composite solutions and experimental results suggest that urethane modifications of acrylate polymers of composite solutions play a key role in enhanced quality performances.

• 한국산학기술학회논문지
• /
• 제18권2호
• /
• pp.95-101
• /
• 2017

본 논문에서는 복합재료로 만들기 위한 전처리 단계에서 수행한 사이징 제거 상태를 영상처리 알고리즘을 적용하여 수치적으로 나타내었고, 전자파 차폐 성능을 높이기 위해서 건식 공정 방식으로 니켈도금 탄소섬유를 제작하였다. 탄소섬유 제조에서 폴리머 종류로 감싸져 나온 사이징은 건식 코팅을 위해서는 제거해야 한다. 사이징이 제거된 상태를 주사 전자현미경(scanning electron microscope, SEM)으로 촬영한 이미지에서 탄소 섬유의 규칙적인 패턴, 즉 상관성을 구함으로써 수치적인 값으로 나타낼 수 있다. 사이징의 제거 방식은 용액, 압축 공기와 용액과 압축공기(하이브리드)로 제거한 SEM 영상에 대하여 제안된 방법을 적용한 결과 하이브리드 방식이 우수함을 확인 할 수 있었다. 그리고 사이징이 제거된 스프레딩 탄소 섬유 롤을 롤투롤 스퍼터 방식으로 니켈도금 탄소 섬유를 제작할 수 있었다. 제작된 30um, 40um과 100um 니켈코팅 탄소섬유에 대해서 전자파 차폐 성능을 측정하였다. 한국산업기술시험원에서 100um 니켈코팅 탄소섬유의 전자파 차폐 성능을 평가한 결과 최저 66.7(dB)에서 최고 73.2(dB)의 전자파 차폐 성능을 보였다. 이것은 구리의 전자파 차폐율과 유사하여 EV/HEV자동차의 케이블로 사용될 수 있다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.98-98
• /
• 2011

직물의 경우 드레이프성을 줄이고 KOSHI감(stiffness)을 부여하기 위해 일반적으로 나이프(knife) 코팅가공을 주로 사용한다. 하지만 니트는 워낙 신축성이 뛰어나기 때문에 큰 장력을 요구하는 일반 코팅공정을 적용할 경우 원단이 나이프에 밀리는 현상과 신장 상태에서 경화되어 니트 특유의 신축성을 완전히 읽어버리는 문제가 발생한다. 따라서 니트 코팅 가공을 위해 원단에 장력이 걸리지 않으며 니트 원단에 직접 수지를 도포하는 방식이 아닌 간접 도포가 가능한 장비를 고안하였다. 즉, 아래에 나타낸 모식도와 같이 프로팅이나 over roll 나이프 방식을 사용하여 전사에 필요한 수지를 R/F에 코팅하고 이를 니트와 붙인 후 열풍 건조기와 열실린더를 통과시켜 수지가 니트에 전사되도록 하는 것이다. 본 연구에서는 고신축성과 탁월한 포면 터치감을 가지는 니트를 겉옷 및 다양한 용도로 전개하기 위해 R/F(releas fabric)의 조건을 설정 및 코팅 조건 설정을 통해 니트 가공 직물의 성능 변화를 살펴보기로 한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1638-1641
• /
• 2008

We have investigated the effectiveness of a gravure printing method for the fabrication of organic light-emitting diode (OLED) and Organic Thin Film Transistor (OTFT). Printing of the organic layers was performed with a small-scale gravure coating machine, while the metallic layers were vacuum-evaporated. Devices with gravure-printed layers are at least comparable with the spin-coated devices. Effects of the solvent formulation and surface energy mismatch between the organic layer materials on the printed patterns and device performance were discussed. We will present the initial design and experimental data of OTFT fabricated by roll-type soft contact transfer process.

• 한국레이저가공학회지
• /
• 제17권4호
• /
• pp.20-23
• /
• 2014

In printed electronics, printing rolls are used to transfer electronic ink onto a flexible substrate. Generally printing rolls are patterned in microscale by the indirect laser method. Since based on the wet etch process, the indirect method is neither environment-friendly nor suitable for making a printing roll with patterns narrower than $20{\mu}m$. In this paper, we have directly engraved micro-patterns into a Zn-coated metal specimens using a picosecond laser in order both to engrave $10{\mu}m$-wide patterns and to improve the pattern profile. Experiments showed that it is possible to engrave $10{\mu}m$-wide patterns with an a rectangular-shaped profile which is necessary for the dimensionally accurate printing.

• 수산해양기술연구
• /
• 제27권2호
• /
• pp.125-131
• /
• 1991

Electrolyte matrix fabrication process can be classifed as hot pressing, tape casting, callendering, electrophoretic deposition. however, these have limits in practice. Hot pressing is cumbersome method, because of careful heating and cooling. Furthermore, the perfected tile is so fragile that it is difficult to fit in a cell. Therefore this method is not adequate for mass production of the electrolyte matrix. Using electrophoretic deposition method, a very thin matrix can be made, but many attempts of the electrolyte embeding were found to be failure. Tape casting and callendering methods are employed in most of the matrix fabrication for the present. But these methods require lots of water as a solvent, so that coating of the LiAlO sub(2) with electrolyte is difficult. Recently, hot roll milling method has been developed and the perfected matrix was proved to be free from crack. The method, however, needs a roller to make a matrix and a perfected matrix is carefully striped off from the cooled roller. Therefore, this method requires a long time due to the cooling process. The author proposes a cold rolling process. On this method, heated slurry of the LiAlO sub(2) mixed with binder, is rolled with a cold roller. The heated slurry dose not adhere to the roller, since contacted hot slurry is rapidly solidified. Therefore fabrication speed is increased, without getting rid of merits of the hot rolling process.

• Elastomers and Composites
• /
• 제7권2호
• /
• pp.239-246
• /
• 1972

이제까지 polyurethane 탄성체(彈性體)에 대한 새로운 연구분야(硏究分野)와 급속(急速)히 변화(變化)되어 가고 있는 polyurethane 제품(製品)의 응용면(應用面에) 대해 알아보았다. 예(例)의 대부분(大部分)은 미국(美國)의 Goodyear tyre & Rubber Co 연구소(硏究所)에서의 연구(硏究) 및 개발(開發)된 것을 기본(基本)으로 하였다. 자동차(自動車)의 내부부분(內部部分), 특히 Crashpad 및 기타 내부부분(內部部分), 고무제자동차(製自動車) bumper의 가능성(可能性), solid tyre, 연료용기(燃料用器) 정지용 belt 장치(裝置), 접착제(接着劑), 고무 Roll, 통풍용치차(通風用用齒車), 진동통(振動桶)과 흥미(興味)진진한 응용면(應用面)에 관한 다른 분야(分野)에 관(關)한 응용(應用)을 검토(檢討)하였다. 화학약품(化學藥品)의 저항성혹(抵抗性或)은 비저항성(非抵抗性)을 가진 새로운응용의 개발(開發)이 urethanr 응용(應用)의 새로운 길을 넓게 열어 놓았다. 합성피혁(合成皮革)과 피혁(皮革)의 Coating 물(物)은 완전(完全)이 polyruethane 기술(技術)에 기초(基礎)를 두게되었다. 특유(特有)한 혼합기기(混合機械)의 개발(開發)은 가격(價格) 및 질(質)에 커다란 영향을 미치게 될 것이다. polyurethane 연구(硏究)의 흥미(興味)있는 분야(分野)는 인공기관(人工器官)에 관(關)한 의학적(醫學的)인 연구(硏究)이다. 우리들이 장래(將來)를 내다볼적에 융통성(融通性) 있는 polyurethane 탄성체(彈性體의) 응용(應用)은 아직도 개발(開發)될 여지가 많이 남아있다는 것을 쉽게 예측할 수 있다. 그 이유(理由)는 polyurethane의 구조적(構造的) 특성(特性), 성능(性能)및 응용(應用)의 가능성(可能性) 및 그의 양식(樣式)이다.