• Journal of Chest Surgery
• /
• v.30 no.3
• /
• pp.282-286
• /
• 1997

In the era of coronary artery bypass grafting, the intraaortic balloon pump (IABP) is more widely used and its indication has been ex anded. We perf'orbed retrospective clinical analysis on the patients who have received IABP pre andfor postoperatively during the course of CABG. From January 1981 to June 1995, total 322 patients have received CABG at the Seoul National University Hospital and among them 50 patients (15.5%) were supported by IABP during the course of the operation. The mean age at the time. of the operation was 57.2 years (39∼ 75 years) and the male to female ratio was 33 : 17. The preoperative diagnosis was unstable angina in 33 (66%), stable angina in 7 (14%) and postinfarct angina in 8 patients(16%). As for the indications of the IABP, there were 13 cases(26%) with left main disease, 13 (26%) with class IV angina, 12 (24%) with difficulty in CPB weaning, 6 (12%) with postinfarct angina and 3 (6%) with severe LV dysfunction. In the remaining 3 cases, one patient was operated on after PTCA failure in emergency basis, another was a patient with AMI, and the other was one who had postoperative low c rdiac output syndrome. All IABPS were introduced via femoral artery and among them 45 cases (90%) percutaneously. The mean postoperative assist time was 22.3 hours (0.5 ∼ 168 hours) and IABP could be removed within 48 hours in most of them (44150). The operative mortality was 6.1% (3 cases) and postoperative morbidity was only one with lower extremity ischemia. The more general application of the IABP during the course of the CABG ,especially in patients with high preoperative risk factors or difficulty in CPB weaning is a good measure of protecting and recovering myocardial function with minimal risk.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.4
• /
• pp.23-34
• /
• 2017

This study focused on a planned site located in Gosangol Village in Daegu Metropolitan City that aims to build an urban agricultural park combining urban agriculture and urban park for the sustainable realization of urban agriculture. Accordingly, this study has significance in two perspectives: firstly, suggesting development strategies to be considered when building an urban agricultural park as a theme park, and secondly, presenting guidelines for spatial programs and facilities to be introduced for actual applications. The results are as follows. Firstly, building an urban agricultural park fills a role as a local community space prompted by the demand-oriented evolution of urban parks, and agricultural behaviors to be incorporated in the theme. In this context, 'building an urban agricultural space focusing on sustainability', 'constructing green space systems focusing on agricultural landscape', and 'structuring leisure spaces for communications in the community' are presented as development strategies. Secondly, key functions that an urban agricultural park should have include production and trade of agricultural products on the production side, soil preservation, resource cycling and green space provision on the environmental side, leisure and experience, community vitalization, education, and social security on the social and cultural side, and entertainment functions, ecological functions, and protective functions as urban park functionality. Thirdly, key facilities needed when building an urban agricultural park include urban agricultural facilities other than park management facilities, landscape facilities, recreational facilities, sports facilities, educational facilities, and convenient facilities, and family gardens as the key facility of the urban agricultural park should be scaled in consideration of various purposes and behaviors of their use. This study has a limitation that the subject site was limited to a specific area but has significance in that it presented a planning model for the spatial structuring of park-type urban agriculture.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.26-33
• /
• 2008

The analysis of wide-angle seismic reflection and refraction data plays an important role in lithospheric-scale crustal structure study. However, it is extremely difficult to develop an appropriate velocity structure model directly from the observed data, and we have to improve the structure model step by step, because the crustal structure analysis is an intrinsically non-linear problem. There are several subjective processes in wide-angle crustal structure modelling, such as phase identification and trial-and-error forward modelling. Because these subjective processes in wide-angle data analysis reduce the uniqueness and credibility of the resultant models, it is important to reduce subjectivity in the analysis procedure. From this point of view, we describe two software tools, PASTEUP and MODELING, to be used for developing crustal structure models. PASTEUP is an interactive application that facilitates the plotting of record sections, analysis of wide-angle seismic data, and picking of phases. PASTEUP is equipped with various filters and analysis functions to enhance signal-to-noise ratio and to help phase identification. MODELING is an interactive application for editing velocity models, and ray-tracing. Synthetic traveltimes computed by the MODELING application can be directly compared with the observed waveforms in the PASTEUP application. This reduces subjectivity in crustal structure modelling because traveltime picking, which is one of the most subjective process in the crustal structure analysis, is not required. MODELING can convert an editable layered structure model into two-way traveltimes which can be compared with time-sections of Multi Channel Seismic (MCS) reflection data. Direct comparison between the structure model of wide-angle data with the reflection data will give the model more credibility. In addition, both PASTEUP and MODELING are efficient tools for handling a large dataset. These software tools help us develop more plausible lithospheric-scale structure models using wide-angle seismic data.

• Development and Reproduction
• /
• v.10 no.3
• /
• pp.159-168
• /
• 2006

Rodents and many other mammals have two chemosensory systems that mediate responses to pheromones, the main and accessory olfactory system, MOS and AOS, respectively. The chemosensory neurons associated with the MOS are located in the main olfactory epithelium, while those associated with the AOS are located in the vomeronasal organ(VNO). Pheromonal odorants access the lumen of the VNO via canals in the roof of the mouth, and are largely thought to be nonvolatile. The main pheromone receptor proteins consist of two superfamilies, V1Rs and V2Rs, that are structurally distinct and unrelated to the olfactory receptors expressed in the main olfactory epithelium. These two type of receptors are seven transmembrane domain G-protein coupled proteins(V1R with $G_{{\alpha}i2}$, V2R with $G_{0\;{\alpha}}$). V2Rs are co-expressed with nonclassical MHC Ib genes(M10 and other 8 M1 family proteins). Other important molecular component of VNO neuron is a TrpC2, a cation channel protein of transient receptor potential(TRP) family and thought to have a crucial role in signal transduction. There are four types of pheromones in mammalian chemical communication - primers, signalers, modulators and releasers. Responses to these chemosignals can vary substantially within and between individuals. This variability can stem from the modulating effects of steroid hormones and/or non-steroid factors such as neurotransmitters on olfactory processing. Such modulation frequently augments or facilitates the effects that prevailing social and environmental conditions have on the reproductive axis. The best example is the pregnancy block effect(Bruce effect), caused by testosterone-dependent major urinary proteins(MUPs) in male mouse urine. Intriguingly, mouse GnRH neurons receive pheromone signals from both odor and pheromone relays in the brain and may also receive common odor signals. Though it is quite controversial, recent studies reveal a complex interplay between reproduction and other functions in which GnRH neurons appear to integrate information from multiple sources and modulate a variety of brain functions.

• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.229-238
• /
• 2011

S-wave, which provides lithology and pore fluid information, plays a key role in estimating gas-hydrate saturation. In general, P- and S-wave velocities increase in the presence of gas-hydrate and the P-wave velocity decreases in the presence of free gas under the gas-hydrate layer. Whereas there are very small changes, even slightly increases, in the S-wave velocity in the free gas layer because S-wave is not affected by the pore fluid when propagating in the free gas layer. To verify those velocity properties of the BSR (bottom-simulating reflector) depth in the gas-hydrate prospect area in the Ulleung Basin, P- and S-wave velocity profiles were derived from multi-component ocean-bottom seismic data which were acquired by Korea Institute of Geoscience and Mineral Resources (KIGAM) in May 2009. OBS (ocean-bottom seismometer) hydrophone component data were modeled and inverted first through the traveltime inversion method to derive P-wave velocity and depth model of survey area. 2-D multichannel stacked data were incorporated as an initial model. Two horizontal geophone component data, then, were polarization filtered and rotated to make radial component section. Traveltimes of main S-wave events were picked and used for forward modeling incorporating Poisson's ratio. This modeling provides S-wave profiles and Poisson's ratio profiles at every OBS site. The results shows that P-wave velocities in most OBS sites decrease beneath the BSR, whereas S-wave velocities slightly increase. Consequently, Poisson's ratio decreased strongly beneath the BSR indicating the presence of a free gas layer under the BSR.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.853-860
• /
• 2007

In this modern era, human beings lead their life in complex environment where there are lots of parameters such as temperature, light, smell, sound, visual stimulus etc. that play important role for quality life. These parameters affect physical and mental behavior of a human being immensely. To ensure quality life the demand for quality products is always associated with human emotion and sensibility. Due to human sensibility and emotion involvement with quality life, the design stages of any kind of product must include some certain features related with emotion and sensibility. The cues for optimizing artificial environment are the physiological responses of human in that environment. The conventional approach of environmental physiology is to measure the relationship between environmental physical parameters and human psychological parameters under artificial conditions. Using that approach we tried to design an artificial environment for our daily lives and activities associated with both physiological and psychological behavior. We developed the technique to present the mock environment and software to measure and evaluate sensibility physiologically or psychologically and a simulator to measure and evaluate sensibility that can be utilized for large scale industrial production and design of environment. Simulator to measure and analyze human sensibility (SMAS) was constructed, which was utilized to estimate human sensibility and to simulate living and office environment.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.4
• /
• pp.19-30
• /
• 2020

Maker education started on the basis of the maker movement in which makers gathered in makerspace share their activities and experiences, and the educational value pursued in maker education is based on the constructivist paradigm. The purpose of this study is to present maker education components to be used in school education, focus on the characteristics and educational values of maker education, and explore ways to use them. To this end, this study explored the theoretical grounds to re-conceptualize maker education, drew statements based on in-depth interview data of teachers conducting maker education classes, and reviewed its validity through experts. Based on these statements, by deriving the components for the use of maker education, the direction of maker education in school education was set, and an example framework that could be used in subject class and creative experiential learning was proposed. Research shows that in maker education, makers cooperate to carry out activities, share ideas with others and try to improve them, and include self-direction such as learning, tinkering, design thinking, sharing and reflection. can see. In addition, maker education emphasizes experiential learning that can solve real problems that students face, rather than confining specific activities to student choices as needed. It emphasizes the learner's course of action rather than the outcome of the activity, tolerates the learner's failure, and emphasizes the role of the teacher as a facilitator to promote re-challenge. In the future, it can be used in various ways in each subject (curriculum expert, teaching/learning expert, elementary and middle school teachers, parents, local educators, etc.) and school activities, and it will contribute to setting future research directions as a basic research for school maker education.

• Journal of Venture Innovation
• /
• v.5 no.3
• /
• pp.71-80
• /
• 2022

The real estate market is an important part of a country's economy and plays a major role in economic growth through the growth of many related industries. Changes in interest rates affect asset prices and have a significant impact on housing prices. This study analyzed housing prices by dividing them into nationwide, local, and Seoul housing prices in order to analyze whether the effect of changes in interest rates on housing prices shows regional differences. The analysis was conducted from the first quarter of 2011 to the fourth quarter of 2021, and was analyzed using the DOLS model. The main analysis results are as follows. First, interest rates were found to have a significant negative effect on national housing prices, and a drop in interest rates significantly increased national housing prices and an increase in interest rates significantly lowered national housing prices. The consumer price index and loan growth rate also had a positive effect on housing prices nationwide, but statistical significance was not high. Second, interest rates had a negative effect on local housing prices, unlike national housing prices, but were not statistically significant. On the other hand, it was found that the consumer price index and loan growth rate had a larger and significant positive effect on local housing prices compared to national housing prices. Finally, it was found that the interest rate had the only significant negative effect on housing prices in Seoul. And this effect was greater and more significant than the effect on national and local housing prices. In the end, it was found that the effect of interest rates on Korean housing prices differs locally. Interest rates have a significant negative effect on national housing prices, and local housing prices, but they are not statistically significant. In addition, the interest rate was found to have the largest and most significant negative effect on housing prices in Seoul. In addition, it was found that there was a difference in the effect of macroeconomic variables on housing prices. This means that there are differences between regions with different factors influencing local and Seoul housing prices, and this point should be considered when drafting and implementing real estate policies.

• Applied Biological Chemistry
• /
• v.20 no.2
• /
• pp.221-227
• /
• 1977

Contents of proline and chloride in halophytes were $80-1700\;{\mu}g/gfw$ and 0.13-0.45 mM/gfw respectively. The content of proline was inversely proportional to that of chloride. Rhizomes of Phargmites communis Trin, a halophyte, were grown in non-saline medium and then taken to saline treatment for one or two weeks. Growth of P. communis was inhibited when salinized with 0.25M NaCl. Total nitrogen decreased and alcohol soluble nitrogen and proline increased when growth was retarded. The quantity of Fraction 1 protein decreased at 0.25M NaCl treatment. The accumulation of proline at high concentration in P. communis suggested that it might play a role in osmotic adjustment.

• Economic and Environmental Geology
• /
• v.47 no.1
• /
• pp.39-48
• /
• 2014

In coastal region, estuaries have complex environments where dissolved and particulate matters are mixed with marine water and substances. Suspended sediment (SS) dynamics in coastal water, in particular, plays a major role in erosion/deposition processes, biomass primary production and the transport of nutrients, micropollutants, heavy metals, etc. Temporal variation in suspended sediment concentration (SSC) can be used to explain erosion/sedimentation patterns within coastal zones. Remotely sensed data can be an efficient tool for mapping SS in coastal waters. In this study, we analyzed the variation in SSC in coastal water using the Geostationary Ocean Color Imager (GOCI) and Landsat Enhanced Thematic Mapper Plus (ETM+) in Gyeonggi-bay. Daily variations in GOCI-derived SSC showed low values during ebb time. Current velocity and water level at 9 and 10 am is 37.6, 28.65 $cm{\cdot}s^{-1}$ and -1.23, -0.61 m respectively. Water level has increased to 1.18 m at flood time. In other words, strong current velocity and increased water level affected high SSC value before flood time but SSC decreased after flood time. Also, we compared seasonal SSC with the river discharge from the Han River and the Imjin River. In summer season, river discharge showed high amount, when SSC had high value near the inland. At this time SSC in open sea had low value. In contrast, river discharge amount from inland showed low value in winter season and, consequently, SSC in the open sea had high value because of northwest monsoon.