• 한국광학회지
• /
• 제15권6호
• /
• pp.575-582
• /
• 2004

두개의 렌즈형 레이저 막대들로 구성된 대칭형 레이저 공진기의 안정도와 빔질 특성을 분석하고 열 복굴절 보상 특성을 수치적으로 분석하였다. 공진기는 열 효과에 의한 이중초점을 제거하기 위한 90$^{\circ}$ 회전자가 두개의 렌즈형 레이저 막대 사이에 삽입된 구조로 되어있다. 수치 분석을 통해 레이저 막대를 오목렌즈로 만들 경우 고출력 영역에서 안정도가 증가하고 빔질이 향상됨을 보였다. 또한 두개의 레이저 막대를 서로 맞댄 공진기 구조에서 열 복굴절이 잘 보상될 수 있음을 보였다.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1541-1550
• /
• 2001

This paper describes experimental investigations in the direct extrusion of copper clad aluminum rods through conical dies. Composite materials consist of two or more different material layers. Copper clad aluminum composite materials are being used fur economic and structural purposes and the development of an efficient production method of copper clad aluminum composite material rods by extrusion is very important, It is necessary to know the conditions in which successful uniform extrusion ,and sound cladding may be carried out without any defects in the direct extrusion. There are several variables that have an influence on determining a sound clad extrusion. In order to investigate the influence of these parameters on the hot direct extrudability of the copper clad aluminum composite material rods, the experimental study have been performed with various extrusion temperatures, extrusion ratios and semi-cone angles of die. Subsequently, the microscopic inspection of interface bonding is carried out for extruded products. By measuring hardness, along extrusion way of products, a variation of hardness has been discussed. Proportional flow state has been considered by measuring radius ratio of Cu sleeve and Al core before and after extrusion.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.568-584
• /
• 1994

Bacteria have been regarded as major etiolgic factors in root canal infections. Infected root canal flora from thirteen patients who had visited to conservative department of Wonkwang dental hospital were cultured on blood agar plates. Cultued microorganisms were isolated and identified with Gram stain and biochemical tests using Vitek Systems(BioMeriux, MO, USA); Antibiotic susceptibillity was performed with disk diffusion and broth microdilution using Vitek Systems. Gram positive cocci(65 %) were predominant, which were composed of 6 Streptococcus viridans group, 5 Staph. spp., and 4 Enterococcus faecium, in the isolatd 23 strains. Gram negative rods (26 %) were the next common bacteria, which were composed of 5 non - fermentative Gram negative rods, and 1 Enterobacter cloacae. Most strains of S. viridans group and E. faecium were susceptible to antibiotics including penicillin. But strains of Staphylococcus spp. and non - fermentative Gram negative rods showed marked resistance to antibiotics except tetrancyclin and cefotaxime. Most results between disk diffusion and microdilution were all agreed, but the results of non - fermentative Gram negative rods were susceptible to cefotaxime in disk diffusion method but resistant in microdilution.

• 대한수의학회지
• /
• 제20권2호
• /
• pp.79-84
• /
• 1980

One hundred and eighteen cultures of Gram-negative rods isolated from cases of clinical bovine mastitis during lactation were examined for distribution of specific types, and activity of several antimicrobial agents to the isolates was determined by two-fold tube dilution method employing sterile whole milk as fluid medium. Of the isolates, 59.2% were Escherichia coli. Most of the remaining isolates were Klebsiella pneumoniae and Enterobacter aerogenes. Most Gram-negative rods(89.8%) were isolated from acute local and chronic mastitis. The cases of peracute systemic form with a marked symptoms of toxemia were associated with Escherichia coli and Klebsiella pneumoniae. The minimal lethal concentrations (MLC) of gentamicin and oxolinic acid in sterile whole milk were 16-128 times higher than the MLC obtained in trypticase soy broth (TSB), while the MLC of ampicillin and tetracycline in milk increased 2-4 times compared with TSB. Of the drugs tested, gentamicin was the most active antibiotics with MLC of $100{\mu}g/ml$ in sterile whole milk against all of Gram-negative rods isolated from bovine udder infections.

• 한국공간구조학회논문집
• /
• 제15권1호
• /
• pp.57-64
• /
• 2015

This paper shows the test results of continuous reinforced concrete beams with external post-tensioning rods. Six three-span beams were prepared and tested to fail. Three beams were designed to have flexure-dominating behavior and the others to have shear-critical behavior. In each group, one beam without external post-tensioning rods was designated as a control beam and two beams had the external post-tensioning rods of 18 mm or 22 mm diameter. External post-tensioning rods were installed within an interior span of 6000 mm. They show V-shaped configuration because two anchorages were located at the top of interior supports and a saddle pin at mid-span was installed at the bottom of the beam. Test results show that the load and shear capacities of strengthened beams were increased when compared with the control beam. Additionally, the measured shear strength was compared with the strength predicted by ACI 318-11 code equations. The detailed ACI 318-11 equation predicted the measured shear strength and failure location of the continuous beam reasonably well.

• Nuclear Engineering and Technology
• /
• 제42권3호
• /
• pp.329-338
• /
• 2010

We developed an achievable control logic for the reactor power level during a power maneuvering event and set up some constraints for the control of the reactor power in a conceptual sodium-cooled fast reactor (KALIMER-600) that was developed at KAERI. For simulating the dynamic behaviors of the plant, we developed a fast-running performance analysis code. Through various simulations of the power maneuvering event, we evaluated some suggested control logic for the reactor power and found an achievable control logic. The objective of the control logic is to search for the position of the control rods that would keep the average temperature of the primary pool constant and, concurrently, minimize the power deviation between the reactor and the BOP cycle during the power maneuvering. In addition, the flow rates of the primary pool and the intermediate loop should be changed according to the power level in order to not violate the constraints set up in this study. Also, we evaluated some movement speeds of the control rods and found that a fast movement of the control rods might cause the power to fluctuate during the power maneuvering event. We suggested a reasonable movement speed of the control rods for the developed control logic.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.598-604
• /
• 2014

A polarization fluorescence correlation spectroscopy system based on a confocal microscope was built to study the rotational and translational diffusion of CdSe/CdS quantum rods (Q-rods), with the same and different polarization states between the polarizer and the analyzer (i.e. the XXX and XYY states). The rotational diffusion amplitude showed the dependences on polarization of $0.75{\pm}0.05$ in the XXX state and $0.26{\pm}0.03$ in the XYY state, when the translational diffusion amplitude was 1. The diffusion coefficients of the Q-rods were found based on their translational and rotational diffusion times in the two polarization states, in solutions with viscosity ranging from 0.9 to 6.9 cP. The translational and rotational diffusion coefficients ranged from $1.5{\times}10^{-11}$ to $2.6{\times}10^{-12}m^2s^{-1}$ and from $2.9{\times}10^5$ to $5.6{\times}10^4s^{-1}$, respectively.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1147-1154
• /
• 1990

본 연구에서는 초음파 화학 가공(ultrasonicassisted chemical mahining)을 이용하여 100$\mu\textrm{m}$이하의 전극봉을 제작하였고 제작한 전극을 이용하여 미세구멍을 방전 가공함으로써 가공특성을 파악하고, 방전액을 각각 등유(kerosene)와 물로하여 구멍의 표면을 비교, 분석하였으며 전극의 지름, 가공물의 두께에 대한 오버컷과 경사도(tap- er) 그리고 전극의 마멸을 조사하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.659-664
• /
• 2002

New design method about the spread footing was developed using only soil and geosynthetics. This footing will be able to replace the concrete footing at constructing the foundation of small structures. As shown in Fig-3(b), after excavating the ground in semicircular shape, geosynthetics is layed on the semicircular shape of ground and let the soil filled. Geosynthetics of upper side are fixed tightly each other It can be thought to be a kind of great bag with semicircular shape. We performed two kinds of experiments to investigate the deformation and the failure shape of spread footing reinforced by geosynthetics. First, after making model ground with aluminium rods, the lattice point of 1cm ${\times}$ 1cm size of the side of aluminium rods have been painted with various kinds of colors. We have observed the movement of painted rods during loading. Second, we have taken pictures about failure process using B-shutter method. Analysing the behavior of model ground reinforced in a semicircular shape, we could know the reinforced one has much greater and wider plastic area than unreinforced one at failure. Based on the experimental results, new design method was proposed, which has a possibility to apply at the field works.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.797-815
• /
• 2014

This research aimed to investigate retrofitting methods for damaged RC columns with SRF (Super Reinforced with Flexibility) and aramid composites and their impacts on the seismic responses. In the first stage, two original (undamaged) column specimens, designed to have a flexural- or shear-controlled failure mechanism, were tested under quasi-static lateral cyclic and constant axial loads to failure. Afterwards, the damaged column specimens were retrofitted, utilizing SRF composites and aramid rods for the flexural-controlled specimen and only SRF composites for the shear-controlled specimen. In the second stage, the retrofitted column specimens were tested again under the same conditions as the first stage. The hysteretic responses such as strength, ductility and energy dissipation were discussed and compared to clarify the specific effects of each retrofitting material on the seismic performances. Generally, SRF composites contributed greatly to the ductility of the specimens, especially for the shear-controlled specimen before retrofitting, in which twice the deformation capacity was obtained in the retrofitted specimen. The shear-controlled specimen also experienced a flexural failure mechanism after retrofitting. In addition, aramid rods moderately fortified the specimen in terms of the maximum shear strength. The maximum strength of the aramid-retrofitted specimen was 12% higher than the specimen without aramid rods. In addition, an analytical modeling of the undamaged specimens was conducted using Response-2000 and Zeus Nonlinear in order to further validate the experimental results.