• Journal of Life Science
• /
• v.27 no.9
• /
• pp.1040-1046
• /
• 2017

We describe the isolation and characterization of six different intestinal microorganisms from the digestive tract of the cricket Gryllus bimaculatus. Based on 16S rRNA gene sequences, we obtained six isolates belonging to four different genera: Staphylococcus, Bacillus, Citrobacter, and Proteus. All the isolates were resistant to ampicillin. Ampicillin is an irreversible inhibitor of the enzymeetranspeptidase, which is needed to make bacterial cell walls. None of the isolates were resistant to kanamycin, which binds to the 30S subunit of the bacterial ribosome and then inhibits total protein synthesis. Gram staining was conducted, in addition to morphological classification under a microscope. Four grampositive isolates and two gram-negative isolates were detected. The gram-positive isolates were GL1 (round shaped, 2 am in diameter), GL2 (rod shaped, $2.5{\mu}m$ in length), GL3 (rod shaped, $2{\mu}m$ in length), and GL4 (round shaped, $1.5{\mu}m$ in diameter). The gram-negative isolates were GL5 (rod shaped, $2{\mu}m$ in length) and GL6 (rod-shaped, $2.5{\mu}m$ in length). Notably, two of the isolates, GL2 and GL4, secreted specific extracellular proteins. These were determined by MALDI-TOF-MS spectral analysis to be a 87 kDa collagenase, 56 kDa hypothetical protein, and 200 kDa hypothetical protein. The six isolates in this study could be used for various biotechnological applications and pest management, both in the field and in greenhouse systems. In addition, it would be interesting to determine the relationship between these isolates and their host.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.1
• /
• pp.36-40
• /
• 1999

A new method was developed to measure underground water level with high reliability. The principle of new method was to detect a change of a buoyant force according to change in water level of underground water measured by the use of a straingage load cell. Field test of the instrument was carried out in Cheju Island. The results were as follows; 1) The present study provided a possibility to develop a new underground water level meter. 2) This new instrument accomplished high reliability at field test in Cheju Island. 3) There is possibility of development of water level meter which measure various range of water level to detect a weight change of a buoyant forcd.

• KSBB Journal
• /
• v.8 no.1
• /
• pp.89-94
• /
• 1993

Thc effect of light and phylohormonc on the belalaln synthesis was tested using the suspension culture of a rod(bclalaln produulng) cell line from Phytolacca esculenta V. Houtte. Betalain synthesis of rod-cell 1ine was strongly dependent on the irradiation of blue light, but induced by hormone, IAA and/or kinetin, in dark conditions. In a light condition, however, 2 mg/l of IAA increased the betalain content about 30% (per gram fresh weight), whereas more than 0.5mg/l of kinetin remarkably decreased. The hairy root derived from the same plant was also observed for the blue light-dependent pigmentation in the root-tips. When the hairy root grown in dark was transferred to the light condition, the accumulation of betalain was initiated after 12hours. Such pigmentation was completely inhabited by addition of a protein synthesis inhibitor.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.162-166
• /
• 2012

High density of ZnO nanorods were fabricated by electrochemical deposition and subsequent heat treatment. Formation of $Zn(OH)_2$ and ZnO during electrodeposition indicated that the electrodeposition efficiency of ZnO was below 33%. ZnO rod has a preferential (200) growth plane after heat treatment at $500^{\circ}C$ and the growth rate of ZnO rod was measured to be 0.986 ${\mu}m/hr$. Dye sensitized solar cell(DSC) showed the efficiency of 0.21% when electrochemically prepared ZnO rod was used as an electrode. It suggests the possible application of ZnO rod structure in the DSC.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.680-686
• /
• 1995

It has been known that water-side corrosion of fuel rods in nuclear reactor is accompanied with the loss of metallic wall thickness and pickup of hydrogen. This corrosion is one of the important limiting factors ill the operating life of fuel rods. In connection with the fuel cladding corrosion, a device to measure the water-side oxide layer thickness by means of the eddy-current method without destructing the fuel rod was developed by KAERI. The device was installed on the multi-function testing bench in the nondestructive test hot-cell and its calibration was carried out successfully for the standard rod attached with plastic thin films whose thicknesses are predetermined. It shows good precision within about 10% error. And a PWR fuel rod, one of the J-44 assembly discharged from Kori nuclear power plant Unit-2, has been selected for oxide layer thickness measurements. With the result of data analysis, it appeared that the oxide layer thicknesses of Zircaloy cladding vary with the length of the fuel rod, and their thicknesses were compared with those of the destructive test results to confirm the real thicknesses.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3301-3312
• /
• 2023

This study incorporates a high-fidelity transient analysis solver based on multigroup CMFD in the MOC code STREAM. Transport modeling with heterogeneous geometries of the reactor core increases computational cost in terms of memory and time, whereas the multigroup CMFD reduces the computational cost. The reactor condition does not change at every time step, which is a vital point for the utilization of CMFD. CMFD correction factors are updated from the transport solution whenever the reactor core condition changes, and the simulation continues until the end. The transport solution is adjusted once CMFD achieves the solution. The flux-weighted method is used for rod decusping to update the partially inserted control rod cell material, which maintains the solution's stability. A smaller time-step size is needed to obtain an accurate solution, which increases the computational cost. The adaptive step-size control algorithm is robust for controlling the time step size. This algorithm is based on local errors and has the potential capability to accept or reject the solution. Several numerical problems are selected to analyze the performance and numerical accuracy of parallel computing, rod decusping, and adaptive time step control. Lastly, a typical pressurized LWR was chosen to study the rod-ejection accident.

• Applied Microscopy
• /
• v.11 no.1
• /
• pp.59-65
• /
• 1981

The pars distalis of the Korean frogs (Rana dybowskii Guenther) during hibernating and active periods was observed with the electron microscope. Seven cell types were classified according to the size and shape of secretory granules and to the ultrastructural characteristics. There were many differences between hibernating and active frogs in type 5 cells. Therefore the following results were observed. Cell type 1; This type cell contains spherical secretory granules, $375{\sim}687m{\mu}$ in diameter. Cell type 2; This type cell contains various secretory granules, $250{\sim}437m{\mu}$ in diameter Cell type 3; Spherical and rod-shaped granules, $l25{\sim}187m{\mu}$ in diameter were observed. Cell type 4; In this type cell, the electron density is the lowest and the density of granules is the highest of all type cells. This type cell contains various secretory granules and large secretory granules, $2l0{\sim}420m{\mu}$ in diameter, were also observed. Cell type 5; The electron density of this cells is similar to that of type 4 cells. The density of granules is lower than that of type 4 cells. And the shapes of the secretory granules are similar to those of type 4 cells. But many rod shaped granules, $200{\sim}863m{\mu}$ in diameter, were also observed. Cell type 6; This type was similar to type 2. The electron density of cytoplasm is very low. Spherical granules, $232{\sim}316m{\mu}$ in diameter, were observed. Cell type 7; This type of cell has no secretory granules. This cell is not developed very well. The type 5 cells in hibernating frogs are different from cells in active frogs. In type 5 cells, many secretory granules were observed during active period. But the number of secretory granules were greatly declined and there were many vacuoles in cytoplasm during hibernating period.

• Korean Journal of Microbiology
• /
• v.28 no.1
• /
• pp.83-89
• /
• 1990

Two strains of actinomycetes producing extracellular adenosine deaminase, strain J-845S and strain J-326TK, were isolated from soil. Strain J-845S was gram-positive and non-acid-fast. This strain formed whitish, rod-shaped, smooth and non-motile spores on the aerial mycelium, and the spore chain was spiral. The hyphae of the mycelium branched abundantly. Cell wall chemotypes of the strain were of type I containing LL-diaminopimelic acids, and of phospholipid type II, and then strain J-845S was designated as Streptomyces sp.. Strain J-326TK was gram-positive and non-acid-fast. The hyphae of primary and aerial mycelium fragmented into irregular rod of coccus-like elements. The aerial mycelium either did not branch or sparsely branched. Cell wall composition was of type I and phospholipid type I. Thus, strain J-326TK was identified as Nocardioides sp.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.2
• /
• pp.56-64
• /
• 2006

Rapid progress in many branches of technology has led to a demand on new materials such as high strength light weight alloys, powdered alloys and composite materials. The hydrostatic extrusion is essentially a method of extruding a clad rod through a die. In order to investigate the effect of the process conditions such as friction heat, deformation and clad thickness on the clad extrusion process, viscoplastic finite element simulations were conducted. A specific model for theoretical analysis used in this study is The single scalar variable version of Hart's model. An experiment also has been carried out using 1.5MN hydrostatic extruder with variable speed ram, LVDT and load cell for comparison. It is found that the hydrostatic extrusion pressure considering the effect of heat dissipation in this theoretical work was closer to the experimental pressure than the isothermal hydrostatic extrusion pressure.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.731-736
• /
• 2000

An optimal design method is adopted for a spacer grid in nuclear power plant. It is made of punched sheet metal process, functioning as springs and dimples supporting fuel rods. For stress analysis of the assembled fuel rod support, a typical cell out of the repeated pattern in the assembly is modeled using 4-node shell elements. A commercial code, ABAQUS, is used for detailed analysis of contacting phenomena with friction. For the optimization, design varibles are taken from geometric parameters representing the shape of the bent leaf spring part and mating contact region with fuel rod. Objective function is considered in relation to mechanical functions and durability. Maximum yon Mises stress is considered in relation to constrained contact stress.