• 환경생물
• /
• 제18권4호
• /
• pp.441-446
• /
• 2000

Trichoderma harzianum is an aggressive causal agent of green mold disease on mushroom cultivation. Some bacterial strains isolated, from oyster mushroom compost in Wonju, were found to have in vitro antifungal activity against Trichoderma harzianum ATCC 6385, 6504, and our isolates Trichoderma spp. Y and G. Further in vitro antifungal studies on several strains of phytopathogenic fungi showed that all of 12 phytopathogenic fungal strains were significantly inhibited by the isolated antifungal bacteria in Petri dishes. Of these, KATB 99121 showed the broadest inhibiting effect and displayed as negative coagulase, negative sulfide production and rod shape. KATB 99121 was resistant to ampicillin, chlorampenicol, and kanamycin. Identification of isolates was determined by Biolog GN system, and KATB 99121 was identified as Photobacterium logei because of 96 probability, 0.65 similarity, and 4.97 disturbance. With electron microscopy, thin section of KATB 99121 strain revealed typical rod-like shaped cell (0.6-0.8${\mu}{\textrm}{m}$$\times$1.5-2.0${\mu}{\textrm}{m}$) with prokaryotic structure and organization.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.24-33
• /
• 2015

Linerboards containing wood flours were developed to increase solid contents in wet pressing process. Presence of wood flours in recycled fibers allowed passage of pressurized water at high wet pressing pressure, and increased solid contents while keeping the bulk of the board. The amount of wood flour addition should be controlled based on the intensity of the wet pressing pressure and the properties of the wood flours. Addition of cationic starch to the wood flour containing OCC furnish showed synergic increase of solid content and strength properties. Shapes of the wood flours such as spherical and rod type added to OCC furnish affected largely their solid content, drainage, and board physical properties.

• Applied Science and Convergence Technology
• /
• 제27권2호
• /
• pp.38-41
• /
• 2018

We demonstrate the growth of a sheet-like ZnO membrane on ZnO nano rod layers. The growth process is composed of 3 steps of ZnO seed formation, ZnO nano rod growth and sheet-like ZnO membrane formation on those nano rods. To confirm the fundamental growth mechanism, the lattice structures of each step were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM) measurement. Analysis of the relation between the texture coefficient and the surface shape of the ZnO membrane on the ZnO nano rods shows that the surface morphology of ZnO nano structures can be controlled using the temperature of the growing solution and the concentration of the chemical solution.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.177-182
• /
• 2000

This paper predicted the equivalent stiffness of spatially reinforced composites (SRC) using the volume average of a fiber rod and matrix stiffness, and the strength of SRC using the stiffness reduction and the modified Tsai-Wu composite failure theory. Those equivalent engineering constants are used to analyze the mechanical behavior and the failure of SRC structures. Because the distribution of equivalent engineering constants is varying with the change in SRC shape, we made a program that predicts engineering constants of SRC. Both 3-D and 4-D SRC show the smallest tensile modulus and the largest shear modulus at the maximum rotated direction from each rod. Also the strength properties show the same tendency.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.451-455
• /
• 2004

Although DC ground resistance is a good index of performance for a grounding system, it does not reflect the grounding performance during the transient states. Besides, impulse ground impedance, which is defined by a ratio of the peak value of transient ground potential rise to the peak value of impulse current, cannot be an absolute performance index due to its dependence on impulse current shape. In this paper, a grounding performance of needle-typed ground rod has been compared with simple ground rod.

• Advances in nano research
• /
• 제15권5호
• /
• pp.411-422
• /
• 2023

In the present study, the axial vibration of the nanorods is investigated in the framework of the doublet mechanics theory. The equations of motion and boundary conditions of nanorods are derived by applying the Hamilton principle. A finite element method is developed to obtain the vibration frequencies of nanorods for different boundary conditions. A two-noded higher order rod finite element is used to solve the vibration problem. The natural frequencies of nanorods obtained with the present finite element analysis are validated by comparing the results of classical doublet mechanics and nonlocal strain gradient theories. The effects of rod length, mode number and boundary conditions on the axial vibration frequencies of nanorods are examined in detail. Mode shapes of the nanorods are presented for the different boundary conditions. It is shown that the doublet mechanics model can be used for the dynamic analysis of nanotubes, and the presented finite element formulation can be used for mechanical problems of rods with unavailable analytical solutions. These new results can also be used as references for the future studies.

• 한국미생물·생명공학회지
• /
• 제21권5호
• /
• pp.414-420
• /
• 1993

Escherichia coli mrdAts and mrdBts mutants forming spherical cells at 42C, were employed to investigate the possible role of both inner and outer membrance structures in the determination of cell shape of gram-negative cells. Spherical cells, but not rod-shaped wild types, were specifically killed by anionic detergents, such as sarkosyl, sodium dodecylsulfate and sodium deoxycholate. From the spherical intact cells grown overnight at 42C, much more proteins were released by sakosyl.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 춘계학술대회 논문집
• /
• pp.251-255
• /
• 1991

The primary objectives of the rolling process are to reduce the cross section of the incoming material while improving its properties and to obtain the desired section at the exit from the rolls. Many engineering metals, suchas aluminium alloys, copper alloys, and steels are often cast intoingots and are then further processed byhot rolling into blooms, slabs, and billets, which are subsequently rolled into other products such as plate, sheet, tube, rod, bar, and structural shapes. In shape rolling a round or square bar is rolled in several passes into various shapes. During eachpass, the bar elongates as well as spreads. Thus, a very complex three-dimensional metal flow takes place. In this paper TASKS results for the simulation of a 7 pass square-to-round shape rolling are presented. The results are verified by comparing it with experimental results from a previous study conducted at the Battelle Columbus Labs

• Smart Structures and Systems
• /
• 제33권3호
• /
• pp.243-251
• /
• 2024

Modeling of vibrations of a rotating pendulum with working shape memory alloy rod has been performed in the frames of a microstructural model taking into account the latent heat release, absorption and the heat exchange during direct and reverse martensitic transformation. It has been shown that the influence of the latent heat, the rate of preliminary deviation of the pendulum from the equilibrium, the rate of heating and cooling can have a significant impact on the vibrations and damping characteristics of the system.

• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.49-54
• /
• 2010

탄성변형 접촉 조건을 가지는 이중냉각 핵연료봉과 이를 지지하는 지지구조체 사이에서 발생하는 프레팅 마멸거동을 모사 시험편을 이용하여 실험적으로 분석하였다. 이중냉각 핵연료봉은 기존의 핵연료에 비해 외경이 증가하므로 새로운 형상을 가지는 지지구조체의 적용이 필수적이며 이에 대한 진동 특성 및 마멸 저항성에 대한 평가가 필수적이다. 본 연구에서는 현재까지 제안된 다양한 형상 중에서 대표적으로 엠보싱 형상을 가지는 지지구조체의 모사 시험편을 이용하여 이중냉각 핵연료봉의 내마멸 특성을 분석하였다. 개발된 지지구조체 특성 시험장비를 이용하여 모사된 지지구조체 시험편의 특성시험을 수행하였으며 이를 해석에 의한 결과와 비교하였다. 또한 기존의 핵연료 내마멸시험과 동일한 조건 및 장비를 이용하여 프레팅 마멸시험을 수행하여 이중냉각 핵연료봉의 프레팅 마멸거동을 관찰하였다. 본 논문에서는 실험결과로부터 지지구조체 특성과 프레팅 마멸거동 사이의 상관관계에 대하여 자세히 논하였다.