• Earthquakes and Structures
• /
• 제23권2호
• /
• pp.169-181
• /
• 2022

To research the dynamic response of the high-rise structure under the rocking ground motion, which we believed that the effect cannot be ignored, especially accompanied by vertical ground motion. Theoretical analysis and shaking table seismic simulation tests were used to study the response of a high-rise structure to excitation of a H-V-R ground motion that included horizontal, vertical, and rocking components. The use of a wavelet analysis filtering technique to extract the rocking component from data for the primary horizontal component in the first part, based on the principle of horizontal pendulum seismogram and the use of a wavelet analysis filtering technique. The dynamic equation of motion for a high-rise structure under H-V-R ground motion was developed in the second part, with extra P-△ effect due to ground rocking displacement was included in the external load excitation terms of the equation of motion, and the influence of the vertical component on the high-rise structure P-△ effect was also included. Shaking table tests were performed for H-V-R ground motion using a scale model of a high-rise TV tower structure in the third part, while the results of the shaking table tests and theoretical calculation were compared in the last part, and the following conclusions were made. The results of the shaking table test were consistent with the theoretical calculation results, which verified the accuracy of the theoretical analysis. The rocking component of ground motion significantly increased the displacement of the structure and caused an asymmetric displacement of the structure. Thus, the seismic design of an engineering structure should consider the additional P-△ effect due to the rocking component. Moreover, introducing the vertical component caused the geometric stiffness of the structure to change with time, and the influence of the rocking component on the structure was amplified due to this effect.

• Structural Engineering and Mechanics
• /
• 제82권5호
• /
• pp.611-628
• /
• 2022

Energy-dissipative rocking (EDR) columns are a class of seismic mitigation device capable of dissipating seismic energy and preventing weak-story failure of moment resisting frames (MRFs). An EDR consists of two hinge-supported steel columns interconnected by steel dampers along its height. Under earthquakes, the input seismic energy can be dissipated by plastic energy of the steel dampers in the EDR column. However, the unrecoverable plastic deformation of steel dampers generally results in residual drifts in the structural system. This paper presents a proof-of-concept study on an innovative device, namely self-centring energy-dissipative rocking (SC-EDR) column, aiming at enabling self-centring capability of the EDR column by installing a set of shape memory alloy (SMA) tension braces. The working mechanism of the SC-EDR column is presented in detail, and the feasibility of the new device is carefully examined via experimental and numerical studies considering the parameters of the SMA bar diameter and the steel damper plate thickness. The seismic responses including load carrying capacities, stress distributions, base rocking behaviour, source of residual deformation, and energy dissipation are discussed in detail. A rational combination of the steel damper and the SMA tension braces can achieve excellent energy dissipation and self-centring performance.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.107-114
• /
• 1997

A dynamic fluid-structure-soil interaction analysis method is developed to investigate the effects of rocking motion on the seismic response of the 3-D flexible rectangular liquid storage tanks founded on the deformable ground. The governing equation of 3-D rectangular tanks subjected to the translational and rocking motions is obtained by Rayleigh-Ritz method. The dynamic stiffness matrix of the rigid surface foundation resting on the surface of a stratum are calculated by hyperelement method. The seismic responses of a 3-D flexible tank model founded on the deformable ground is calculated by combining the governing equation of the structural motion with the dynamic stiffness matrix of the rigid surface foundation.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.279-286
• /
• 1997

The objective of this paper is to investigate the effects of the rocking motion and the vertical natural frequency of a seismically isolated structure using LRBs. The governing equations of motion of the rigid body structure, which consider a large rocking motion, are derived. For the mathematical model of LRB, the horizontal stiffness equation based on Haringx's theory is used. From this paper, as decreasing the vertical natural frequency, the rocking responses increase and the horizontal isolation frequency and its earthquake responses are severely affected.

• 한국공간구조학회논문집
• /
• 제19권2호
• /
• pp.27-34
• /
• 2019

This study proposes a technique to dissipate the energy of a rocking wall installed on a frame by using a metallic damper. The rocking behavior is to turn left and right about the wall vertical axis. The development system is a method of dissipating energy by installing a damper which is the like on a large displacement portion. Experimental results showed that in case of shorter strut make strength capacity increasement and in case of longer strut make deformation capacity increasement. The higher the strut height, the better the energy dissipation capacity. The proposed equation for estimating the steel damper strength applied to this study is a straight type strut damper. However, it is not suitable for calculation of the strength of clamped type strut damper where both flexural behavior and shear behavior are mixed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권6호
• /
• pp.1-9
• /
• 2020

본 연구에서는 벽체의 록킹 거동을 고려한 내진보강 기법을 개발하였다. 록킹 거동은 벽체 수직 축을 중심으로 좌우로 회전하는 것으로, 개발 시스템은 변위 큰 부분에 댐퍼 등을 설치하여 에너지를 소산 시키는 방법이다. 댐퍼는 강봉 댐퍼를 사용하였으며, 강봉 지름 및 길이(형상비)를 변수로 선정하였다. 실험결과 댐퍼길이 260mm 경우 우수한 내진 성능을 보유한 것으로 평가되었다.

• 한국지진공학회논문집
• /
• 제19권6호
• /
• pp.293-302
• /
• 2015

ASCE 4 requires that a hard stop be built around the seismic isolation system in nuclear power plants. In order to maintain the function of the isolation system, this hard stop is required to have clearance-to-stop, which should be no less than the 90th-percentile displacements for 150% Design Basis Earthquake (DBE) shaking. Huang et al. calculated clearance-to-stop by using a Latin Hypercube Sampling technique, without considering the rocking behavior of the isolated structure. This paper investigates the effects on estimation of clearance-to-stop due to 1) rocking behavior of the isolated structure and 2) sampling technique for considering the uncertainties of isolation system. This paper explains the simplified analysis model to consider the rocking behavior of the isolated structure, and the input earthquakes recorded at Diablo Canyon in the western United States. In order to more accurately approximate the distribution tail of the horizontal displacement in the isolated structure, a modified Latin Hypercube Sampling technique is proposed, and then this technique was applied to consider the uncertainty of the isolation system. Through the use of this technique, it was found that rocking behavior has no significant effect on horizontal displacement (and thus clearance-to-stop) of the isolated structure, and the modified Latin Hypercube Sampling technique more accurately approximates the distribution tail of the horizontal displacement than the existing Latin Hypercube Sampling technique.

• 한국지반공학회논문집
• /
• 제32권8호
• /
• pp.47-59
• /
• 2016

얕은 기초의 회전거동은 지진 시 상부 구조물의 지진하중을 줄이는 효과적인 방법으로 대두되고 있다. 그러나 회전거동의 메커니즘에 대한 이해부족과 항복거동으로 인한 지반변형 때문에 시공에 적용되지 못하고 있다. 본 연구에서는 원심모형실험을 이용한 수평반복하중 실험을 통해 세장비가 다른 시스템의 근입된 얕은 기초의 회전거동 특성을 평가하였다. 실험결과를 통해 기초의 회전거동으로 인한 하부지반면의 원형현상을 관찰하였으며, 이로 인해 기초의 최대 전도모멘트가 기초의 극한 모멘트 지지력과 같아지는 것을 알 수 있었다. 기초 저면에서 관측된 토압변화를 통해 항복거동으로 인한 수평거동과 회전거동의 연결(coupling)과 분리(decoupling)현상을 볼 수 있었다. 또한 기초의 회전각이 증가할수록 지반의 비선형성과 에너지 감쇠가 커짐을 알 수 있었고, 근입된 기초의 극한 모멘트 지지력이 지표면에 놓인 기초의 극한 모멘트 지지력보다 더 커지는 것을 확인하였다. 본 연구를 통해 기초의 회전거동을 이용한 내진 설계 시 보다 정확하고 적절한 기초의 극한 모멘트 지지력을 제시할 수 있을 것이라 판단된다.

• 한국지반공학회논문집
• /
• 제33권6호
• /
• pp.5-16
• /
• 2017

얕은기초의 회전거동은 지진 시 기초 위 상부 구조물의 지진 하중을 줄여주는 장점이 있어 새로운 기초 내진설계개념으로 대두되고 있다. 본 연구에서는 현장 채취한 시료를 다짐하여 조성된 풍화토 지반에서 얕은기초의 회전거동을 평가하기 위하여 동적 원심모형실험을 수행하였다. 원심모형실험 모형은 풍화토 지반, 얕은기초, 단자유도 구조물로 이루어져 있으며, 지진 시 지반, 기초, 구조물의 가속도 응답과 기초의 침하 등 얕은기초 시스템의 거동을 관찰하였다. 입력 지진 하중이 클 경우 상부 구조물의 지진하중은 풍화토 지반에 놓인 기초 들뜸에 의한 회전거동으로 인해 줄어들었으며, 기초의 침하도 최대 기초폭의 0.5%이하로 작게 발현되었다. 이를 통하여 향후 추가적인 연구 및 검증을 바탕으로 국내 풍화토 지반에서 회전 거동 개념을 이용한 기초 설계 가능성을 확인하였다.

• Earthquakes and Structures
• /
• 제15권6호
• /
• pp.639-654
• /
• 2018

Rocking motion have been used for achieving the 'resilient buildings' against earthquakes in recent studies. Low-rise buildings, unlike the tall ones, because of their small aspect ratio tend to slide rather than move in rocking mode. However, since rocking is more effective in seismic response reduction than sliding, it is desired to create rocking motion in low-rise buildings too. One way for this purpose is making the building's structure rock on its internal bay(s) by reducing the number of bays at the lower part of the building's skeleton, giving it a mushroom form. In this study 'mushroom skeleton' has been used for creating multi-story rocking regular steel buildings with square plan to rock on its one-by-one bay central lowest story. To show if this idea is effective, a set of mushroom buildings have been considered, and their seismic responses have been compared with those of their conventional counterparts, designed based on a conventional code. Also, a set of similar buildings with skeleton stronger than code requirement, to have immediate occupancy (IO) performance level, have been considered for comparison. Seismic responses, obtained by nonlinear time history analyses, using scaled three-dimensional accelerograms of selected earthquakes, show that by using appropriate 'mushroom skeleton' the seismic performance of buildings is upgraded to mostly IO level, while all of the conventional buildings experience collapse prevention (CP) level or beyond. The strong-skeleton buildings mostly present IO performance level as well, however, their base shear and absolute acceleration responses are much higher than the mushroom buildings.