• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.47-60
• /
• 2018

In this paper, we proposed a method for eliminating aiming error of unguided anti-tank rocket using improved target tracking. Since predicted fire is necessary to hit moving targets with unguided rockets, a method was proposed to estimate the position and velocity of target using fire control system. However, such a method has a problem that the hit rate may be lowered due to the aiming error of the shooter. In order to solve this problem, we used an image-based target tracking method to correct error caused by the shooter. We also proposed a robust tracking method based on TLD(Tracking Learning Detection) considering characteristics of the FCS(Fire Control System) devices. To verify the performance of our proposed algorithm, we measured the target velocity using GPS and compared it with our estimation. It is proved that our method is robust to shooter's aiming error.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.173-176
• /
• 2002

DAS(Data Acquisition System) as a ground support equipment has played a critical role in proving the status of ready-to-fire of a rocket system before launch. But it is hard to implement and place a real-time measuring system in a control room at a long distance from the vehicle. In this paper DAS is introduced by being located at the LEC(Launch Equipment Container)[1], 50 meters away from the rocket and connected to remote monitoring system via fiber optics with TCP/IP protocol by means of client/server algorithm. Therefore real-time data acquisition and storage are guaranteed and a convenient and useful MMI (Man-Machine Interface) can be developed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2001

To protect combustion chamber from high temperature combustion gas, regenerative cooling is used for most liquid rocket engine. Although regenerative cooling is the most effective way to protect the chamber from high heat flux, realization of this system requires detail analysis, manufacturing technique and high cost. To demonstrate the possibility of applying regenerative cooling to a real rocket engine, the hot fire test has been carried out for the sub-scale liquid rocket with the water cooling system. The main purpose of the test is to identify the problem area of design, safety and cost effective manufacturing technique. The coolant passage was 3 mm in width and wall thickness was 1 mm with stainless steel. Maximum combustion time and pressure were 60 seconds and 400 psi, respectively. The flow rate of coolant was reduced gradually from 2 kg/s to 0.12 kg/s throughout firing test, combustion chamber was visually examined and no dwfect was observed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.04a
• /
• pp.27-31
• /
• 1997

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.721-723
• /
• 2000

국내 과학관측 로켓(Korea Sounding Rocket-III; 이하 KSR-III) 발사통제 시스템 개발 중 로켓 임무 달성에 필요한 시스템 구성과 제작에 대한 전반적인 설계내용을 기술하였다. 로켓 임무와 설계 요구 조건에 의해 각 통제 콘솔과 발사 상황판은 설계되었고 현재 제작 중에 있으며. 향후 KSR-III 발사시험 시 활용 할 계획이다.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.77-78
• /
• 2012

To predict combustion instability in actual full-scale combustion chamber of rocket engines, air-injection test is proposed with scaling techniques. From the data, damping factors have been obtained as a function of hydraulic parameter and the data give us instability map. Two instability regions are presented and it is found that they coincide reasonably with them from hot-fire test with full-scale flow rates. Accordingly, the proposed approach can be applied cost-effectively to stability rating of jet injectors when mixing of fuel and oxidizer jets is the dominant process in instability triggering.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2662-2664
• /
• 2002

액체추진 과학로켓으로 개발되고 있는 KSR-III(Korea Sounding Rocket-III)의 발사통제시스템의 개발에 관하여 기술하였다. 발사통제시스템은 장기간에 걸쳐 개발된 로켓을 발사시키는데 필수적인 시스템으로서 신뢰성과 강인성이 최대한 요구된다. KSR-III 발사통제시스템의 하드웨어는 콘솔, PLC, 신호분배기, DAS로 구성되어 있으며 소프트웨어로서 HMI 및 DAS 제어프로그램이 있다.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2795-2798
• /
• 2003

본 논문에서는 국내에서 개발하고 있는 과학로켓용 발사통제시스템(FCS, Fire Control System)의 시퀀스제어의 처리 영역을 PLC 시스템을 사용하여 구현하였다. 프로세서의 이중화를 통하여 Hot Backup 시스템을 구축하고 ControlNet 네트워크［l］［2］를 기반으로 하는 프로세서와 I/O 간의 통신을 이용하였다. 먼저 로켓 발사통제시스템의 개요 및 주요 임무에 대하여 설명하고 기존에 사용된 발사통제시스템 구성을 분석하였다. PLC 시스템의 개요와 CPU 동작 내용 그리고 ControlNet 통신방식에 대하여 설명하고 프로세서를 이중화한 시스템을 제안하였다. 또한 이중화된 프로세서의 Switchover［2］방법을 알아보고 이러한 조건에 따른 PLC 시스템을 응용한 발사 통제시스템을 구성하여 이를 위해 작성된 시스템 운용 Ladder Diagram 프로그램에 대한 기술을 논하였다. 개발된 PLC 시스템의 구성을 제시하고 발사체 및 각종 지원시설과 연계한 시험을 통하여 성능을 검증하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.262-265
• /
• 2003

This Study is focused on the instrumenting Hybrid Rocket Motor of ACPL at Konkuk University and researching combustion instability by measuring regression rate versus oxidizer mass flux. In the result of experiment, test fire was moderate and we could acquire data of pressure, thrust, and temperature of combustion chamber. In the future, studying unsteady change of regression rate and pressure characteristic analysis of combustion chamber through hundreds of experiments should be performed. furthermore, researching characteristic velocity by taking a measurement of combustion temperature will be inevitable.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.405-408
• /
• 2011

본 논문은 발사체 추진기관의 지상 시험을 수행 하면서 쌓은 경험을 바탕으로 한 운용방법에 대해서 서술하고 있다. 운용방법은 발생 할 수 있는 사고를 줄이기 위한 특별한 방법 및 정책, 그리고 사고를 줄이기 위한 기술적 해결책을 포함 하고 있다. 이러한 운용방법은 추진기관 시험 시에 발생 할 수 있는 비정상적 상황에 관한 연구를 통하여 정립되었다. 서술한 운용방법을 통해서 발사체 추진기관의 시험운용을 개선 할 수 있으며, 안전하게 수행할 수 있다.