• Geomechanics and Engineering
• /
• 제16권4호
• /
• pp.399-413
• /
• 2018

This paper addresses the issue of field measurement of excavation damage zone (EDZ) and its numerical simulation method considering both excavation unloading and blasting load effects. Firstly, a 2000 m-deep rock cavern in China is focused. A detailed analysis is conducted on the field measurement data regarding the mechanical response of rock masses subjected to excavation and blasting operation. The extent of EDZ is revealed 3.6 m-4.0 m, accounting for 28.6% of the cavern span, so it is significantly larger than rock caverns at conventional overburden depth. The rock mass mechanical response subjected to excavation and blasting is time-independent. Afterwards, based on findings of the field measurement data, a numerical evaluation method for EDZ determination considering both excavation unloading and blasting load effects is presented. The basic idea and general procedures are illustrated. It features a calibration operation of damage constant, which is defined in an elasto-plastic damage constitutive model, and a regression process of blasting load using field blasting vibration monitoring data. The numerical simulation results are basically consistent with the field measurement results. Further, some issues regarding the blasting loads, applicability of proposed numerical method, and some other factors are discussed. In conclusion, the field measurement data collected from the 2000 m-deep rock cavern and the corresponding findings will broaden the understanding of tunnel behavior subjected to excavation and blasting at great depth. Meanwhile, the presented numerical simulation method for EDZ determination considering both excavation unloading and blasting load effects can be used to evaluate rock caverns with similar characteristics.

• Geomechanics and Engineering
• /
• 제7권4호
• /
• pp.375-401
• /
• 2014

It is generally accepted that material heterogeneity has a great influence on the deformation, strength, damage and failure modes of rock. This paper presents numerical simulation on rock failure process based on the characterization of rock heterogeneity by using a digital image processing (DIP) technique. The actual heterogeneity of rock at mesoscopic scale (characterized as minerals) is retrieved by using a vectorization transformation method based on the digital image of rock surface, and it is imported into a well-established numerical code Rock Failure Process Analysis (RFPA), in order to examine the effect of rock heterogeneity on the rock failure process. In this regard, the numerical model of rock could be built based on the actual characterization of the heterogeneity of rock at the meso-scale. Then, the images of granite are taken as an example to illustrate the implementation of DIP technique in simulating the rock failure process. Three numerical examples are presented to demonstrate the impact of actual rock heterogeneity due to spatial distribution of constituent mineral grains (e.g., feldspar, quartz and mica) on the macro-scale mechanical response, and the associated rock failure mechanism at the meso-scale level is clarified. The numerical results indicate that the shape and distribution of constituent mineral grains have a pronounced impact on stress distribution and concentration, which may further control the failure process of granite. The proposed method provides an efficient tool for studying the mechanical behaviors of heterogeneous rock and rock-like materials whose failure processes are strongly influenced by material heterogeneity.

• 터널과지하공간
• /
• 제15권2호
• /
• pp.129-136
• /
• 2005

터널이나 지하구조물의 건설시 필요한 지보의 설계는 보통 시추에 의한 지반조사결과에 기초하고 있다. 지반조사 자료가 부족한 지역에서의 암반 물성을 보다 객관적이고 추계학적(stochastic)으로 예측하기 위해 유전알고리즘(genetic algorithm)과 조건부 모사 기법(conditional simulation)을 사용하였다. 지구통계학적 모델링의 방법으로 조건부 모사를 실시한 후에 공간상관관계의 최적화과정을 통해 암반 물성을 구하였다. 유전알고리즘을 이용할 경우 크리깅에 의한 분산의 감소 현상을 극복하고 확률적으로 값을 제시할 수 있었다. 또한 30번의 확률적 등가치(equi-probable) 모사를 통해 유전알고리즘으로 구한 값의 불확실성을 정량적인 확률분포 값으로 제시하였고, 교차검증(cross validation) 방법으로 유전알고리즘의 신뢰도를 검증하였다.

• 터널과지하공간
• /
• 제16권1호
• /
• pp.1-10
• /
• 2006

실제 암반에는 단층, 절리, 층리, 균열, 단열, 편리, 벽개 등의 불연속면이 많이 포함되어 있다. 따라서, 불연속면이 암반구조물의 거동을 좌우하고 있다. 암반구조의 복잡성으로 인해 사전에 예측 할 수 없었던 암반의 붕락이 발생하여, 붕락대책에 막대한 비용과 시간을 낭비하는 사례가 많다. 암반 불연속면의 복잡성을 사전 조사단계에서 충분히 파악하거나 대책을 수립하는 것은 어렵다. 최근 터널의 정보화 설계시공이 중요시되어지고 있다. 본 논문에서는 불연속성 암반에서의 터널의 신 정보화 설계시공법을 제안하고, 현지에서 관찰한 불연속면 정보를 근거로 하여 실제 터널현장에 적용했다. 실제 터널현장에 있어서, 터널의 신 정보화 설계시공법을 위해서 새롭게 개발한 수치해석 프로그램을 사용하여 정확한 키블럭 추출이 가능하였다. 사용하기 쉬운 사용자 인터페이스를 가지고 있는 본 컴퓨터 시뮬레이션 기법은 암반블럭의 안정성 계산뿐만 아니라 추가 보강대책공의 설계도 가능하다. 터널 굴착중에 키블럭을 확인하므로써, 제안한 신 정보화 설계시공법의 유효성에 대한 검증을 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.751-758
• /
• 2005

In this study, the Discrete Element Code was applied to the analysis of falling rock blocks. The simulation was performed using the PFC2D computer code. Falling rock blocks should be applied as additional force to each others. The force affect the motion of falling rock blocks. This was used to find out the behavior of each blocks. This study revealed that the DEM can successfully capture the behavior of falling rock blocks.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.1-7
• /
• 2016

The pick cutter, which directly contacts and crushes the rock, is the expendable part of a roadheader. The arrangement and angle of attachment of the pick cutter are important factors that determine excavator performance. It is necessary to numerically calculate the contact between the pick cutter and rock. The rock is defined as a set of particles using the discrete element method. The parallel bond model is used to define the bonds between particles. The properties of granite that are measured by the uniaxial compressive test are applied to the numerical rock model. The pick cutter is defined by the polygon elements. The linear cutting simulation is considered to simulate the contact between the pick cutter and rock. The results of the simulation show the rock breaking due to contact with the pick cutter.

• Geomechanics and Engineering
• /
• 제11권2호
• /
• pp.197-209
• /
• 2016

Clayey rock has large clay mineral content. When in contact with water, this expands considerably and may present a significant hazard to the stability of the rock in geotechnical engineering applications. This is particularly important in the present work, which focused on mitigating some unwelcomed properties of clayey rock. Changes in its physical properties were simulated by subjecting the rock to a low voltage direct current (DC) using copper, steel and aluminum electrodes. The modified mechanism of the coupled electrical and chemical fields acting on the clayey rock was analyzed. It was concluded that the essence of clayey rock electrochemical modification is the electrokinetic effect of the DC field, together with the coupled hydraulic and electrical potential gradients in fine-grained clayey rock, including ion migration, electrophoresis and electro-osmosis. The aluminum cathodes were corroded and generated gibbsite at the anode; the steel and copper cathodes showed no obvious change. The electrical resistivity and uniaxial compressive strength (UCS) of the modified specimens from the anode, intermediate and cathode zones tended to decrease. Samples taken from these zones showed a positive correlation between electric resistivity and UCS.

• 터널과지하공간
• /
• 제21권3호
• /
• pp.216-224
• /
• 2011

본 연구에서는 Class II 거동에 대해 입자결합모델을 이용하여 수치해석적인 방법으로 살펴보았으며, 횡방향 변형률 제어 압축시험을 수치해석적으로 모사할 수 있는 방법을 제시하였다. 수치해석에서 사용된 미시변수는 스웨덴 Aspo Hard Rock Laboratory에서 수행한 일축압축시험을 이용하여 결정하였다. 제시된 수치해석 기법을 이용해 Aspo 암석의 Class II 거동을 효과적으로 모사할 수 있었으며, 수치해석의 결과는 실험실 시험 결과와 잘 일치하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.58-63
• /
• 2009

Biaxial compression test was conducted on a transversely isotropic synthetic jointed rock model for the understanding of the fracture behaviors of a sedimentary or metamorphic rocks with well developed bedding or foliation in uni-direction. The joint angles employed for the model are 30, 45, and 60 degrees to the horizontal, and the synthetic rock mass was made of early strength cement. From the biaxial compression test, initiation propagation of tensile cracks at norm to the joint angle was found. The propagated tensile cracks eventually developed rock blocks, which was dislodged from the rock mass. Furthermore, the propagation process of the tensile cracks varies with joint angle: lower joint angle model shows more stable and progressive tensile crack propagation. The experiment results were validated from the simulation by using discrete element method PFC 2D. From the simulation, as has been observed from the test, a rock mass with lower joint angle produces wider damage region and rock block by tensile cracks. In addition, a rock model with lower joint angle shows a progressive tensile cracks generation around the opening from the investigation of the interacted tensile cracks.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.548-552
• /
• 2003

During the last few decades, the frequency and distribution of rockfalls have been increased in Korea due the development of rock slope in mountain areas. Although the scale of, falling block of rockfall was small, there were some casualties of lives and loss of properties. In order to reduce damage from rockfall, analysis on rock slope indanger of rockfall should be carried out. Thus, the simulation softwares for rockfall behavior analysis have been introduced. In this study, geotechnical investigation and input data for rockfall simulation are described with the comparison among four commercially available rockfall simulation softwares. Finally, rockfall simulation works are described by exmining a case of inaccessible rock-slope of potential rockfall in Korea.